{"title":"Gas Engine-Driven Welders","description":"\u003cp\u003eGas engine-driven welders run on gasoline, making them easy to fuel at any job site without diesel sourcing. Lincoln Electric's gas lineup includes the Ranger series (225, 250 GXT, 260MPX, 305G, 305G EFI, Ranger Air), Eagle 10,000 Plus, Bulldog 5500, and Outback 145\/185—all powered by Kohler engines known for easy service and widespread parts availability. Output ranges from 145 amps (Outback 145) up to 305+ amps (Ranger 305G) for stick, TIG, MIG, and carbon arc gouging. WeldingMart carries the full Lincoln gas engine-driven lineup, including factory-demo and certified pre-owned units with warranty coverage.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between gas and diesel engine-driven welders?\u003c\/h3\u003e\n\u003cp\u003eGas engine-driven welders run on readily available gasoline and are well-suited for light-to-medium construction, farm and ranch work, and general contracting. Diesel models cost more upfront but offer lower fuel cost per hour and longer engine life for heavy continuous use. Both produce equivalent weld quality.\u003c\/p\u003e\n\u003ch3\u003eWhat Kohler engine is in the Lincoln Ranger 305G?\u003c\/h3\u003e\n\u003cp\u003eThe Lincoln Ranger 305G uses a Kohler Command Pro CH740 gasoline engine, rated for commercial continuous use. The EFI version uses an electronic fuel injection system for better fuel efficiency and easier cold-weather starting without manual choke adjustment.\u003c\/p\u003e\n\u003ch3\u003eHow much generator power do gas engine-driven welders produce?\u003c\/h3\u003e\n\u003cp\u003eMost Lincoln gas engine-driven welders produce 9,500 to 10,500 watts of auxiliary generator power for tools and lighting. The Ranger Air 260MPX and 330MPX add a built-in air compressor for plasma cutting and air-carbon arc gouging.\u003c\/p\u003e\n\u003ch3\u003eAre Lincoln Outback and Bulldog welders good for farm and ranch use?\u003c\/h3\u003e\n\u003cp\u003eYes. The Outback 145 and 185 are compact, lightweight gas engine-driven welders ideal for farm maintenance—fencing, equipment repair, and light fabrication. The Bulldog 5500 offers more output and generator capacity for heavier farm and ranch applications.\u003c\/p\u003e","products":[{"product_id":"lincoln-outback-145-engine-driven-welder-kohler-k2707-2","title":"Lincoln Outback 145 Engine Driven Welder Kohler - K2707-2","description":"\u003cp\u003e\u003cstrong\u003eThe Lincoln Outback 145 Engine driven welder K2707-2 delivers exceptional portability and versatility in a compact engine-driven welder\/generator package, making it the ideal solution for professionals requiring reliable welding and auxiliary power in remote locations or job sites without access to conventional power sources\u003c\/strong\u003e. This lightweight yet rugged machine provides up to 145 amps of DC stick welding output, delivering ample power to handle electrodes up to 1\/8 inch (3.2 mm) in diameter for a wide range of maintenance, repair, and general fabrication applications. The innovative Low-Lift grab bars positioned at both ends create additional leverage points that significantly reduce the effort required when loading and unloading the unit from truck beds or relocating it around the jobsite, while also providing extra protection against accidental damage during transportation and handling.\u003c\/p\u003e\n\u003cp\u003eBuilt for durability in demanding field environments, the Outback 145 features a robust 1-1\/4 inch (32 mm) diameter tube frame – the largest in its class – that provides superior protection for internal components against impacts and rough handling. The system's substantial 6.8 gallon (25.7 liter) fuel tank offers extended runtime between refueling stops, maximizing productivity during extended operations and reducing downtime. This large capacity, combined with the efficient 8.9 HP Kohler CH395 engine, ensures consistent performance throughout long work sessions in remote locations where refueling options may be limited or inconvenient.\u003c\/p\u003e\n\u003cp\u003eBeyond its primary welding capabilities, the Outback 145 functions as a versatile portable generator, delivering 4,750 watts peak and 4,250 watts continuous AC power that can operate grinders, work lights, pumps, and other electrical equipment, or serve as an emergency power source when conventional utilities are unavailable. The system's versatility extends further through compatibility with Lincoln Electric wire feeders such as the POWER MIG 140C or POWER MIG 180C, enabling MIG and flux-cored welding processes for enhanced application flexibility. With its thoughtful combination of performance, durability, and user-friendly features in a lightweight package weighing just 234 pounds (106 kg), the Lincoln Outback 145 represents an exceptional value for service trucks, fence contractors, maintenance crews, farmers, ranchers, and other professionals requiring a portable, reliable source of both welding capability and auxiliary power in field environments.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLow-Lift Grab Bars - More leverage for lifting unit on and off truck beds with extra protection against product damage.\u003c\/li\u003e\n\u003cli\u003e1-1\/4 in. (32 mm) Diameter Rugged Tube Frame - Great for all-around sturdy protection, largest diameter tube frame in its class.\u003c\/li\u003e\n\u003cli\u003e6.8 Gallon (25.7 Liter) Fuel Tank - For extended run times with less frequent re-fueling and large fuel fill opening for easy re-fueling.\u003c\/li\u003e\n\u003cli\u003eDC Welding with up to 1\/8 in. (3.2 mm) Stick Electrode - Up to 145 amps of DC output for many applications.\u003c\/li\u003e\n\u003cli\u003e4,750 Watts Peak (4,250 Watts Continuous) AC Generator Power - For grinders, work lights, pumps, motor starting, or emergency power.\u003c\/li\u003e\n\u003cli\u003eCompatible with Lincoln POWER MIG 140C or POWER MIG 180C for wire welding capabilities.\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cstyle\u003e\n  .specs-table {\n    width: 100%;\n    border-collapse: collapse;\n    font-family: Arial, sans-serif;\n  }\n  .specs-table tr:nth-child(odd) {\n    background-color: #f5f5f5;\n  }\n  .specs-table td {\n    padding: 10px;\n    border-bottom: 1px solid #ddd;\n  }\n  .specs-table td:first-child {\n    width: 30%;\n  }\n  .section-header {\n    font-size: 18px;\n    font-weight: bold;\n    padding: 20px 0 10px 0;\n  }\n\u003c\/style\u003e\n\u003ch3\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"section-header\"\u003e\u003cstrong\u003eProduct Weights \u0026amp; Dimensions\u003c\/strong\u003e\u003c\/div\u003e\n\u003ctable class=\"specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd\u003e25.5 in x 21.2 in x 31.5 in (647 mm x 537 mm x 800 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e234 lbs (106 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"section-header\"\u003e\u003cstrong\u003eGeneral Specification\u003c\/strong\u003e\u003c\/div\u003e\n\u003ctable class=\"specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMachines Processes\u003c\/td\u003e\n\u003ctd\u003eStick (SMAW)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"section-header\"\u003e\u003cstrong\u003eMachine Technologies \u0026amp; Connections\u003c\/strong\u003e\u003c\/div\u003e\n\u003ctable class=\"specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Range by Mode\u003c\/td\u003e\n\u003ctd\u003eCC-Stick: 50 – 145 Amps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"section-header\"\u003e\u003cstrong\u003eEngine Driven Welders\u003c\/strong\u003e\u003c\/div\u003e\n\u003ctable class=\"specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle Phase Auxiliary Output\u003c\/td\u003e\n\u003ctd\u003e4, 250 Watts Continuous, 120\/240V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuxiliary Output Frequency\u003c\/td\u003e\n\u003ctd\u003e60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReceptacle Types\u003c\/td\u003e\n\u003ctd\u003eNEMA 5-20R\u003cbr\u003eNEMA 6-50R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine Brand \u0026amp; Model\u003c\/td\u003e\n\u003ctd\u003eKohler CH395\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine Description\u003c\/td\u003e\n\u003ctd\u003e1 Cylinder Air Cooled Gasoline Engine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine Horsepower\u003c\/td\u003e\n\u003ctd\u003e8.9 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh Idle Operating Speed @ Rated Output\u003c\/td\u003e\n\u003ctd\u003e3600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuel Tank Size (US gal.)\u003c\/td\u003e\n\u003ctd\u003e6.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuel Tank Size (L)\u003c\/td\u003e\n\u003ctd\u003e25.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOil Capacity (qts.)\u003c\/td\u003e\n\u003ctd\u003e1.2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOil Capacity (L)\u003c\/td\u003e\n\u003ctd\u003e1.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"section-header\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003ctable class=\"specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical Application\u003c\/td\u003e\n\u003ctd\u003eGeneral Fabrication\u003cbr\u003eMaintenance \u0026amp; Repair\u003cbr\u003eRepair Welding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"section-header\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/div\u003e\n\u003ctable class=\"specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Years Parts and Labor - Engine warranted separately by engine manufacturer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Lincoln Electric","offers":[{"title":"Default Title","offer_id":43638742089879,"sku":"K2707-2","price":5839.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/lincoln-outback-145-engine-driven-welder-kohler-k2707-2-lincoln-electric-1.jpg?v=1765589348"},{"product_id":"lincoln-eagle-10-000-plus-factory-demo-engine-driven-welder-kohler-u2343-3","title":"Lincoln Eagle 10,000 PLUS Factory Demo Engine Driven Welder Kohler - U2343-3","description":"\u003cp\u003e\u003cstrong\u003eA great choice for getting the job done! For construction contractors, maintenance crews, farmers or ranchers, the Eagle™ 10,000 Plus does a variety of basic welding jobs\u003c\/strong\u003e. And with 10,500 watts of surge AC generator power, it handles a variety of other jobs: lights, grinder, Lincoln Electric inverter, plasma cutter (separate air supply needed) or emergency power.\u003c\/p\u003e\n\u003cp\u003eThe Eagle 10,000 Plus features a totally enclosed case that fully protects the engine with three service access doors for easy maintenance. It operates with remarkably low noise - 76.4 dBA sound level at 23 ft. (7 m) and 100.7 dB sound power (Lwa) at rated output, making it ideal for job sites where noise reduction is important. The versatile DC welding output delivers smooth performance for a broad range of stick electrode types, while also supporting MIG, flux-cored and basic TIG welding in constant current mode with optional equipment. This multi-purpose machine comes ready to work with included accessories: 20 ft. (6.0 m) of #2 electrode cable, electrode holder, and 15 ft. (4.5 m) of #2 work cable and work clamp.\u003c\/p\u003e\n\u003cp\u003ePowered by a robust 23 HP Kohler gasoline engine, this unit features a 2 cylinder, 4 cycle overhead valve air-cooled design with an oil drain extension for easy maintenance. The substantial 12 gallon fuel tank provides extended run times with impressive fuel efficiency - only 1.3 gallons\/hour at 210 amps DC, 25V, 100% duty cycle. Visual fuel level gauges on both sides of the unit make monitoring fuel levels convenient from any angle. With 10,500 watts of surge single-phase AC generator power for motor starting and 9,000 watts of continuous power, the Eagle 10,000 Plus can run generators, plasma cutters, inverter welders, lights, grinders, and various power tools. Built for rugged reliability, both the welding and AC generator outputs are rated for performance at 104°F (40°C), ensuring dependable operation even in demanding environmental conditions.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes 20 ft. (6.0 m) of #2 electrode cable, electrode holder, 15 ft. (4.5 m) of #2 work cable and work clamp to get You started!\u003c\/li\u003e\n\u003cli\u003eTotally Enclosed Case with three service access doors and low noise operation\u003c\/li\u003e\n\u003cli\u003eVersatile DC Welding for stick electrodes, MIG, flux-cored and basic TIG (with optional equipment)\u003c\/li\u003e\n\u003cli\u003e10,500 Watts Surge Single-Phase AC Generator Power with 9,000 watts continuous\u003c\/li\u003e\n\u003cli\u003e23 HP Kohler Gasoline Engine with 12 gallon tank for extended run times\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 class=\"specs-container\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"section-header\"\u003e\u003cstrong\u003eProduct Weights \u0026amp; Dimensions\u003c\/strong\u003e\u003c\/div\u003e\n\u003ctable class=\"specs-table\" height=\"95\" style=\"width: 100.039%;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 26.2124%;\"\u003eDimensions (H x W x D)\u003c\/td\u003e\n\u003ctd style=\"width: 66.1588%;\"\u003e29.9 in x 21.5 in x 42.3 in (759 mm x 546 mm x 1074 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 26.2124%;\"\u003eNet Weight\u003c\/td\u003e\n\u003ctd style=\"width: 66.1588%;\"\u003e514 lbs (233 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"section-header\"\u003e\u003cstrong\u003eGeneral Specification\u003c\/strong\u003e\u003c\/div\u003e\n\u003ctable class=\"specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMode Icon\u003c\/td\u003e\n\u003ctd\u003eCC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Range\u003c\/td\u003e\n\u003ctd\u003e50-225A DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"section-header\"\u003e\u003cstrong\u003eEngine Driven Welders\u003c\/strong\u003e\u003c\/div\u003e\n\u003ctable class=\"specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngine Horsepower\u003c\/td\u003e\n\u003ctd\u003e23 @ 3600 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGenerator Output\u003c\/td\u003e\n\u003ctd\u003e10,500 Watts Surge, 9,000 Continuous\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"section-header\"\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/div\u003e\n\u003ctable class=\"specs-table\" style=\"width: 100.039%; height: 98.0035px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 98.0035px;\"\u003e\n\u003ctd style=\"width: 26.2124%; height: 98.0035px;\"\u003eTypical Application\u003c\/td\u003e\n\u003ctd style=\"width: 66.1588%; height: 98.0035px;\"\u003eConstruction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv class=\"divider\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"section-header\"\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/div\u003e\n\u003ctable class=\"specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cstyle\u003e\n  .specs-container {\n    font-family: Arial, sans-serif;\n    margin-top: 30px;\n  }\n  \n  .specs-header {\n    font-size: 24px;\n    font-weight: bold;\n    margin-bottom: 20px;\n  }\n  \n  .section-header {\n    font-size: 18px;\n    font-weight: bold;\n    margin: 30px 0 15px 0;\n  }\n  \n  .specs-table {\n    width: 100%;\n    border-collapse: collapse;\n    margin-bottom: 20px;\n  }\n  \n  .specs-table tr:nth-child(odd) {\n    background-color: #f5f5f5;\n  }\n  \n  .specs-table td {\n    padding: 10px;\n    border-bottom: 1px solid #ddd;\n  }\n  \n  .specs-table td:first-child {\n    width: 30%;\n  }\n  \n  .divider {\n    border-top: 1px solid #ddd;\n    margin: 30px 0;\n  }\n\u003c\/style\u003e","brand":"Lincoln Electric","offers":[{"title":"Default Title","offer_id":43639680303255,"sku":"U2343-3","price":4799.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/lincoln-eagle-10000-plus-low-hour-factory-demo-engine-driven-welder-kohler-u2343-3-lincoln-electric-1.jpg?v=1753402830"},{"product_id":"lincoln-ranger-330mpx-welder-generator","title":"Lincoln Ranger 330MPX Welder\/Generator","description":"\u003cp\u003eThe Lincoln Electric Ranger® 330MPX is a powerful, compact multi-process welder generator designed for construction, maintenance, service trucks, and pipeline applications. Featuring a modern digital interface, advanced welding technologies, and clean AC generator power, the Ranger 330MPX delivers industry-leading performance in a smaller, quieter package. :contentReference[oaicite:0]{index=0}\u003c\/p\u003e\n\n\u003cp\u003eAvailable in both standard carbureted and EFI (electronic fuel injection) models, this machine is built to perform in demanding environments, including high-altitude and extreme weather conditions. With 330 amps of welding output and a 25 HP engine, the Ranger 330MPX provides the power, control, and reliability professionals need on the jobsite. :contentReference[oaicite:1]{index=1}\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\n\u003ch3\u003eCompact, Lightweight Design\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUp to 20% smaller footprint than comparable machines\u003c\/li\u003e\n  \u003cli\u003eUp to 25% lighter for easier transport and installation\u003c\/li\u003e\n  \u003cli\u003eIdeal for service trucks and mobile welding applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eQuiet Operation\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUp to 60% quieter than similar machines in its class\u003c\/li\u003e\n  \u003cli\u003eDesigned to improve operator comfort and jobsite conditions\u003c\/li\u003e\n  \u003cli\u003eReduced noise output around 74.7 dB at full load\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMulti-Process Welding Capabilities\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eStick (SMAW), MIG (GMAW), Flux-Cored (FCAW), TIG (GTAW)\u003c\/li\u003e\n  \u003cli\u003eArc gouging capability up to 3\/16\" carbon electrode\u003c\/li\u003e\n  \u003cli\u003eAdvanced modes including downhill pipe and pulse TIG\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAdvanced Digital Controls\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eReady.Set.Weld® intuitive push-and-turn interface\u003c\/li\u003e\n  \u003cli\u003eArcFX® technology for real-time weld feedback\u003c\/li\u003e\n  \u003cli\u003eDigital display with easy navigation and setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSmart Technology Integration\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCrossLinc® remote technology for cable-based control\u003c\/li\u003e\n  \u003cli\u003ePasscode protection for locking settings and weld modes\u003c\/li\u003e\n  \u003cli\u003eMaintenance tracking with engine hour monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003ePowerful Welding Performance\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e330A at 100% duty cycle for demanding applications\u003c\/li\u003e\n  \u003cli\u003eHandles up to 1\/4\" 7018 electrode with ease\u003c\/li\u003e\n  \u003cli\u003eFine-tune controls for hot start, arc force, and pinch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eClean Generator Power\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e10 kW continuous AC power (11.5 kW peak)\u003c\/li\u003e\n  \u003cli\u003eStable power for tools, lights, and jobsite equipment\u003c\/li\u003e\n  \u003cli\u003eFull KVA output for consistent performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eEngine Options for Any Environment\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eStandard carbureted engine for reliable performance\u003c\/li\u003e\n  \u003cli\u003eEFI model for high altitude and cold weather starting\u003c\/li\u003e\n  \u003cli\u003e25 HP Kohler® gasoline engine for dependable power\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBuilt for the Jobsite\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eGalvanized base for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eFront battery access for easy maintenance\u003c\/li\u003e\n  \u003cli\u003eDurable construction designed for daily use\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProcesses\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eStick (SMAW)\u003c\/li\u003e\n  \u003cli\u003eMIG (GMAW)\u003c\/li\u003e\n  \u003cli\u003eFlux-Cored (FCAW)\u003c\/li\u003e\n  \u003cli\u003eTIG (GTAW)\u003c\/li\u003e\n  \u003cli\u003eArc Gouging\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eConstruction and fabrication\u003c\/li\u003e\n  \u003cli\u003eMaintenance and repair\u003c\/li\u003e\n  \u003cli\u003eService trucks and mobile welding\u003c\/li\u003e\n  \u003cli\u003ePipeline welding\u003c\/li\u003e\n  \u003cli\u003eRental equipment fleets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eAvailable Models\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRanger® 330MPX (K3459-1)\u003c\/li\u003e\n  \u003cli\u003eRanger® 330MPX EFI (K4779-1)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhy Choose the Ranger® 330MPX?\u003c\/h2\u003e\n\u003cp\u003eThe Ranger® 330MPX combines advanced digital controls, powerful multi-process capability, and compact portability into one of the most versatile welder generators in its class. Whether you're working in the field, on a truck, or in demanding environments, this machine delivers the performance, efficiency, and reliability needed to get the job done right.\u003c\/p\u003e","brand":"Lincoln Electric","offers":[{"title":"Factory Reconditioned — EFI","offer_id":43639681155223,"sku":"U4779-1","price":8999.0,"currency_code":"USD","in_stock":true},{"title":"Base Model - K3459-1","offer_id":43638669869207,"sku":"K3459-1","price":9849.99,"currency_code":"USD","in_stock":true},{"title":"Factory Reconditioned","offer_id":43638705160343,"sku":"U3459-1","price":8199.0,"currency_code":"USD","in_stock":true},{"title":"Electronic Fuel Injection - K4779-1","offer_id":43639561912471,"sku":"K4779-1","price":10689.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/u4779-1.png?v=1755131371"}],"url":"https:\/\/weldingmart.com\/collections\/gas-engine-driven-welders.oembed","provider":"WeldingMart.com","version":"1.0","type":"link"}