{"title":"Iola Car Show \u0026 EAA Specials","description":"\u003ch2\u003eBuilt for the Show Floor — and the Shop Floor\u003c\/h2\u003e\u003cp\u003eWhether you're restoring a classic at the Iola Car Show or building something new at EAA AirVenture, Lincoln Electric has the machine for your next project. These are our featured welders, plasma cutters, and power solutions — handpicked for fabricators, restorers, and builders who demand professional-grade results.\u003c\/p\u003e\u003cp\u003eQuestions? Call us at \u003cstrong\u003e1-800-404-9353\u003c\/strong\u003e or chat live on WeldingMart.com. Free shipping on orders over $99.\u003c\/p\u003e","products":[{"product_id":"lincoln-square-wave-205-tig-welder-k5613-1","title":"Lincoln Square Wave 205 TIG Welder - K5613-1","description":"\u003cstyle\u003e\n.pdp-specs-table { width:100%; border-collapse:collapse; font-family:Arial,sans-serif; margin-bottom:16px; }\n.pdp-specs-table tr:nth-child(odd) { background:#f5f5f5; }\n.pdp-specs-table td { padding:10px 12px; border-bottom:1px solid #ddd; vertical-align:top; }\n.pdp-specs-table td:first-child { width:34%; font-weight:600; }\n.pdp-faq { margin-bottom:12px; }\n.pdp-faq strong { display:block; margin-bottom:4px; }\n.recon-crosslink { background:#fff8f0; border-left:4px solid #e07b00; padding:14px 18px; margin:24px 0; border-radius:3px; }\n\u003c\/style\u003e\n\n\u003ch2\u003eWhy Choose the Lincoln Square Wave 205?\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLincoln Square Wave 205 (K5613-1)\u003c\/strong\u003e is Lincoln Electric's flagship portable AC\/DC TIG and Stick welder, replacing the legendary Square Wave TIG 200 with a 5-amp bump to 205 A, a full-color 4.3\" LCD interface, and advanced waveform controls that were previously found only on machines costing two to three times as much. If you weld aluminum, stainless, mild steel, or chrome-moly — and you want professional results from a 36-pound machine you can carry to any outlet — this is the welder.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAC\/DC TIG and Stick in one machine.\u003c\/strong\u003e AC TIG on aluminum and magnesium, DC TIG on stainless, steel, chrome-moly, and titanium — plus dedicated E6010 and E7018 DC Stick modes with crisp or soft arc selection.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrue dual-voltage: 120 V or 230 V without any adapter rewiring.\u003c\/strong\u003e Auto-sensing input detects the outlet and optimizes output. Use 120 V for light sheet metal and low-amp work; switch to 230 V for full 205 A TIG output on aluminum up to 3\/8\" and steel up to 1\/2\".\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdvanced pulse TIG built-in.\u003c\/strong\u003e Pulse frequency from 0.1 Hz to 500 Hz (on 230 V). Low-frequency pulse (0.5–2 Hz) helps beginners control the puddle on thin stainless; high-frequency pulse (above 100 Hz) creates a focused, tight arc cone on 1\/8\" and thicker material without adding heat to the surrounding zone.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAC frequency and AC balance control.\u003c\/strong\u003e Adjust AC frequency from 60–150 Hz: lower frequency for more cleaning on heavily oxidized aluminum, higher frequency for a more focused arc and narrower bead width. AC balance (60–90%) controls the oxide-cleaning vs. penetration ratio — critical for consistent aluminum TIG welds.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e4.3\" full-color LCD.\u003c\/strong\u003e Multilingual (English, Spanish, French). Built-in parameter guide shows recommended amperage, tungsten size, and filler for selected material and thickness. Guides beginners and speeds up setup for experienced welders switching materials.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-frequency arc start and lift TIG start.\u003c\/strong\u003e Touchless HF start eliminates tungsten contamination and produces consistent arc initiation at low amperages. Lift TIG available for environments where HF interference is a concern.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShips complete.\u003c\/strong\u003e Everything to start welding except filler metal and gas cylinder: Premium Caliber TIG torch with flexible head (12.5 ft), foot Amptrol (25 ft), gas regulator\/flowmeter, work cable and clamp, electrode holder, and a TIG kit with gas lenses, tungsten electrodes (0.040\" to 3\/32\"), and collets.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3-year factory warranty.\u003c\/strong\u003e Lincoln Electric's full 3-year warranty on all new K-prefix units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"recon-crosslink\"\u003e\n  \u003cstrong\u003eLooking to save up to 35%?\u003c\/strong\u003e Browse \u003ca href=\"https:\/\/weldingmart.com\/collections\/used-tig-welders-for-sale\"\u003eFactory Demo TIG Welders\u003c\/a\u003e — same warranty, factory-tested, restocked frequently.\n\u003c\/div\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"pdp-specs-table\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU \/ Model\u003c\/td\u003e\n\u003ctd\u003eK5613-1 \/ Square Wave 205\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProcesses\u003c\/td\u003e\n\u003ctd\u003eAC TIG (GTAW), DC TIG (GTAW), DC Stick (SMAW), AC Stick (SMAW)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e120 V or 230 V, 1-Phase, 50\/60 Hz (auto-sensing)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Current\u003c\/td\u003e\n\u003ctd\u003e120 V: 25 A  |  230 V: 22 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput Range — TIG\u003c\/td\u003e\n\u003ctd\u003e120 V: 5–125 A  |  230 V: 5–205 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput Range — Stick\u003c\/td\u003e\n\u003ctd\u003e120 V: 5–90 A  |  230 V: 5–170 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output (230 V)\u003c\/td\u003e\n\u003ctd\u003eTIG: 205 A \/ 18.2 V @ 25%  |  130 A \/ 100%  |  Stick: 170 A @ 25%  |  100 A @ 100%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output (120 V)\u003c\/td\u003e\n\u003ctd\u003eTIG: 90 A \/ 13.6 V @ 30%  |  Stick: 80 A \/ 23.2 V @ 30%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eAC\/DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePulse Frequency\u003c\/td\u003e\n\u003ctd\u003e0.1–500 Hz (230 V) \/ 0.1–20 Hz (120 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAC Frequency\u003c\/td\u003e\n\u003ctd\u003e60–150 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAC Balance\u003c\/td\u003e\n\u003ctd\u003e60–90%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e4.3\" Full-Color LCD (EN\/ES\/FR)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eArc Start\u003c\/td\u003e\n\u003ctd\u003eHigh-Frequency Start \u0026amp; Lift TIG Start\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFoot Pedal Compatible\u003c\/td\u003e\n\u003ctd\u003eYes — Foot Amptrol included (25 ft, 6-pin Lincoln)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRemote Control\u003c\/td\u003e\n\u003ctd\u003e6-Pin Lincoln connector standard\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWork Lead Connector\u003c\/td\u003e\n\u003ctd\u003eDinse\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e36 lbs (16.3 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions (H×W×D)\u003c\/td\u003e\n\u003ctd\u003e14.75\" × 9.27\" × 21\" (375 × 235 × 534 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Years (Lincoln Electric factory)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew — Lincoln Electric K-prefix (factory-new)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSquare Wave 205 Power Source (K5613-1)\u003c\/li\u003e\n  \u003cli\u003ePremium Caliber TIG Torch with Flexible Head — 12.5 ft, 200 A rated\u003c\/li\u003e\n  \u003cli\u003eFoot Amptrol — 25 ft, 6-pin Lincoln connector (K870)\u003c\/li\u003e\n  \u003cli\u003eGas Regulator \/ Flowmeter with hose\u003c\/li\u003e\n  \u003cli\u003eWork Cable \u0026amp; Clamp — 10 ft\u003c\/li\u003e\n  \u003cli\u003eElectrode Holder with cable — 200 A, 35% duty cycle\u003c\/li\u003e\n  \u003cli\u003eTIG Torch Consumable Kit: gas lenses, ceramic cups, tungsten electrodes (0.040\" to 3\/32\" ceriated), collets, and collet bodies\u003c\/li\u003e\n  \u003cli\u003e120 V \/ 230 V input power adapter\u003c\/li\u003e\n  \u003cli\u003eOperator's manual (printed + USB)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Accessories\u003c\/h2\u003e\n\u003cp\u003eExpand the Square Wave 205's capability with WeldingMart's Lincoln-compatible accessories:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/tig-torches\"\u003e\u003cstrong\u003eTIG Torches\u003c\/strong\u003e\u003c\/a\u003e — Air-cooled PTA-17 and PTA-26 torches in 12.5 ft and 25 ft lengths; flexible-neck bodies for pipe, tube, and corner welds; replaceable torch heads for worn or contaminated tips without replacing the full cable assembly.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/tig-rod-welding-rods\"\u003e\u003cstrong\u003eTIG Filler Rod\u003c\/strong\u003e\u003c\/a\u003e — ER4043 and ER5356 for aluminum; ER308L, ER309L, ER316L for stainless steel; ER70S-2 and ER70S-6 for mild steel; ER80S-B2 and ER90S-B3 for chrome-moly; ERTi-2 and ERTi-5 for titanium. Available in 1 lb and 10 lb packs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/tig-foot-pedals\"\u003e\u003cstrong\u003eFoot Pedals \u0026amp; Amptrol\u003c\/strong\u003e\u003c\/a\u003e — Additional Lincoln 6-pin compatible foot pedals for remote amperage control during TIG; thumb controls for out-of-position work where a foot pedal is impractical.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/welding-gas-regulators-top-quality-gas-pressure-control\"\u003e\u003cstrong\u003eArgon Regulators\u003c\/strong\u003e\u003c\/a\u003e — Single-stage and dual-stage CGA-580 flowmeters for pure argon (TIG standard) and argon\/helium blends for thicker aluminum; compact inline regulators for portable 120 V operation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/tig-welding-supplies\"\u003e\u003cstrong\u003eTIG Consumable Kits\u003c\/strong\u003e\u003c\/a\u003e — Premium gas lens kits (1\/16\", 3\/32\", 1\/8\" ceriated and lanthanated tungsten); ceramic cup assortments; collet and collet body packs; back cap sets. Gas lens conversion dramatically improves shielding coverage on aluminum and stainless TIG — recommended for any welder using the SW205 for precision work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTIG Welding Applications\u003c\/h2\u003e\n\u003cp\u003eThe Square Wave 205's 5–205 A range, dual-voltage input, and advanced AC controls make it one of the most versatile portable TIG machines in its class:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAutomotive fabrication \u0026amp; restoration.\u003c\/strong\u003e DC TIG at 120 V welds thin 22-gauge stainless exhaust flanges, mild steel body panels, and 4130 chromoly tubing for race car chassis and roll cages. Switch to 230 V for heavier brackets and frame sections up to 1\/4\". High-frequency pulse tightens the arc cone on tube joints where heat control is critical. Store setups for each material to minimize setup time between jobs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAluminum welding — marine, automotive, aerospace.\u003c\/strong\u003e AC TIG with variable balance (60–90%) and adjustable frequency (60–150 Hz) handles everything from thin 18-gauge aluminum sheet on motorcycle tank patches to 3\/8\" marine aluminum plate on boat transom repairs. Frequency at 120 Hz narrows the arc width for controlled bead placement; balance set to 65% reduces tungsten wear and ball formation on long aluminum runs.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSheet metal fabrication \u0026amp; artistic metalwork.\u003c\/strong\u003e 0.1 Hz pulse at low current (20–40 A) lets beginners bridge gaps and weld short-circuit without burn-through on 20-gauge and 22-gauge stainless or mild steel. Artists and sculptors use the SW205 for delicate copper and bronze TIG, controlling heat precisely with the foot Amptrol across thin-wall tube and rod assemblies.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStainless steel food equipment, brewery, and pharmaceutical.\u003c\/strong\u003e DC TIG on 304L and 316L stainless with ER308L and ER316L filler produces low-carbon, corrosion-resistant welds required for sanitary tubing, vessels, and fittings. The SW205's 130 A @ 100% duty cycle supports sustained production TIG runs without shutdown cycles in shop environments.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEducation, training, and makerspaces.\u003c\/strong\u003e The built-in parameter guide, multilingual LCD, and comprehensive included kit make the SW205 a natural choice for welding programs at community colleges, vocational schools, and makerspaces. Students learn AC frequency and balance on aluminum without purchasing separate controllers — all controls are on the front panel, explained by the on-screen guide.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What is the difference between the Square Wave TIG 200 and the Square Wave 205?\u003c\/strong\u003e\n  \u003cp\u003eThe Square Wave 205 (K5613-1) replaces the Square Wave TIG 200. Key upgrades: 5 A higher max output (205 vs. 200 A on 230 V), a 4.3\" full-color LCD display replacing the older segment display, pulse frequency extended to 500 Hz (vs. approximately 20 Hz on the TIG 200), and a built-in parameter guide for material\/thickness-based setup. The TIG 205 also adds dedicated E6010 crisp and E7018 soft Stick modes. The included accessories package is more complete, with a premium flexible-head torch and a 25-ft foot Amptrol.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Can the Square Wave 205 weld aluminum on a 120 V outlet?\u003c\/strong\u003e\n  \u003cp\u003eYes, with some limitations. On 120 V, the SW205 delivers up to 125 A AC TIG output — sufficient for aluminum up to approximately 1\/8\" thick (3 mm) using the rule of thumb of 1 A per 0.001\" of aluminum thickness. For heavier aluminum (3\/16\" to 3\/8\"), use 230 V input for the full 205 A output. The machine auto-detects the input voltage — no manual reconfiguration required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Does the Square Wave 205 come with a foot pedal?\u003c\/strong\u003e\n  \u003cp\u003eYes. The K5613-1 ships with a 25-ft Foot Amptrol (6-pin Lincoln connector) for remote amperage control during TIG welding. The foot pedal lets you ramp current up and down while keeping both hands on the torch and filler rod — critical for aluminum TIG where heat management varies as the base material heats up during the weld.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What tungsten electrode should I use for AC TIG on aluminum?\u003c\/strong\u003e\n  \u003cp\u003eLincoln recommends 2% ceriated tungsten for the Square Wave 205 on aluminum, pointed to a fine point or blunt taper. The machine's AC frequency and balance controls allow the tungsten to form a small hemispherical ball at the tip during operation — normal and desirable on AC TIG. Do not sharpen aluminum TIG tungsten to the same sharp point used for DC TIG on steel. The included TIG kit contains 2% ceriated tungsten in 0.040\", 1\/16\", and 3\/32\" diameters.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Will the Square Wave 205 run on a generator for field TIG welding?\u003c\/strong\u003e\n  \u003cp\u003eYes, the SW205 is inverter-based and handles minor generator voltage fluctuation well. Lincoln recommends a generator with at least 6,000 watts (6 kVA) for 120 V TIG operation and 10,000 watts (10 kVA) for 230 V full-output TIG. Use a generator with electronic governor (inverter-type generator) for the cleanest waveform when HF arc start is active — standard generators with mechanical governors may cause occasional HF interference but generally work adequately for DC TIG and Stick.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the difference between the Square Wave TIG 200 and the Square Wave 205?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The Square Wave 205 (K5613-1) replaces the Square Wave TIG 200. Key upgrades: 5 A higher max output (205 vs. 200 A on 230 V), a 4.3\\\" full-color LCD display replacing the older segment display, pulse frequency extended to 500 Hz (vs. approximately 20 Hz on the TIG 200), and a built-in parameter guide for material\/thickness-based setup. The TIG 205 also adds dedicated E6010 crisp and E7018 soft Stick modes. The included accessories package is more complete, with a premium flexible-head torch and a 25-ft foot Amptrol.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can the Square Wave 205 weld aluminum on a 120 V outlet?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, with some limitations. On 120 V, the SW205 delivers up to 125 A AC TIG output -- sufficient for aluminum up to approximately 1\/8\\\" thick (3 mm). For heavier aluminum (3\/16\\\" to 3\/8\\\"), use 230 V input for the full 205 A output. The machine auto-detects the input voltage with no manual reconfiguration required.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the Square Wave 205 come with a foot pedal?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The K5613-1 ships with a 25-ft Foot Amptrol (6-pin Lincoln connector) for remote amperage control during TIG welding. The foot pedal lets you ramp current up and down while keeping both hands on the torch and filler rod.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What tungsten electrode should I use for AC TIG on aluminum?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Lincoln recommends 2% ceriated tungsten for the Square Wave 205 on aluminum, pointed to a fine point or blunt taper. The AC frequency and balance controls allow the tungsten to form a small hemispherical ball at the tip during operation -- normal and desirable on AC TIG. The included TIG kit contains 2% ceriated tungsten in 0.040\\\", 1\/16\\\", and 3\/32\\\" diameters.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Will the Square Wave 205 run on a generator for field TIG welding?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes, the SW205 is inverter-based and handles minor generator voltage fluctuation well. Lincoln recommends a generator with at least 6,000 watts (6 kVA) for 120 V TIG operation and 10,000 watts (10 kVA) for 230 V full-output TIG. Use a generator with electronic governor (inverter-type generator) for the cleanest waveform when HF arc start is active.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n","brand":"Lincoln Electric","offers":[{"title":"Default Title","offer_id":45322085499031,"sku":"K5613-1","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/k5613-1DBD.png?v=1757890661"},{"product_id":"lincoln-power-mig-220-ac-dc-multi-process-welder-k5379-1","title":"Lincoln POWER MIG 220 AC\/DC Multi-Process Welder - K5379-1","description":"\u003cstyle\u003e\n.pdp-specs-table { width:100%; border-collapse:collapse; font-family:Arial,sans-serif; margin-bottom:16px; }\n.pdp-specs-table tr:nth-child(odd) { background:#f5f5f5; }\n.pdp-specs-table td { padding:10px 12px; border-bottom:1px solid #ddd; vertical-align:top; }\n.pdp-specs-table td:first-child { width:34%; font-weight:600; }\n.pdp-faq { margin-bottom:12px; }\n.pdp-faq strong { display:block; margin-bottom:4px; }\n.recon-crosslink { background:#fff8f0; border-left:4px solid #e07b00; padding:14px 18px; margin:24px 0; border-radius:3px; }\n\u003c\/style\u003e\n\n\u003ch2\u003eWhy Choose the Lincoln POWER MIG 220 AC\/DC?\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLincoln POWER MIG 220 AC\/DC (K5379-1)\u003c\/strong\u003e is Lincoln Electric's most versatile compact multi-process welder — a single 51-pound machine that delivers MIG, Flux-Cored, Stick, DC TIG, and \u003cem\u003eAC TIG on aluminum\u003c\/em\u003e from a standard 120 V or 230 V household outlet. It is the only machine in Lincoln's portable lineup that includes both AC and DC TIG output, full spool gun circuitry for aluminum MIG, and Ready.Set.Weld® preset weld parameters — removing the guesswork for fabricators who switch processes frequently.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAC\/DC TIG — aluminum TIG welding without a separate machine.\u003c\/strong\u003e The K5379-1 produces AC TIG output with adjustable AC frequency (20–100 Hz) and AC balance control — the features required for aluminum TIG. Most multi-process welders at this price point deliver DC TIG only. The 220 AC\/DC handles 4043 and 5356 aluminum filler rod, titanium, and stainless with equal precision. On 230 V, the AC TIG range reaches 210 A, covering 1\/4\" and thicker aluminum plate.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilt-in spool gun circuitry for aluminum MIG.\u003c\/strong\u003e The POWER MIG 220 AC\/DC includes dedicated spool gun circuitry compatible with the Lincoln Magnum PRO 100SG and 150SG spool guns (sold separately). Aluminum MIG with a spool gun eliminates the wire feeding issues common to push-pull setups on thin-wall 5052 and 6061 aluminum sheet, boat hulls, and automotive panels.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e230 A MIG output on 230 V with 100% duty cycle at 120 A.\u003c\/strong\u003e On 230 V input, MIG output reaches 230 A — enough for 1\/4\" mild steel and structural fillet welds. At 120 A on 230 V, duty cycle is 100%. On 120 V input, 100% duty cycle is maintained at 75 A MIG. Production welding continues uninterrupted for most fabrication and light industrial work without thermal shutdowns.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReady.Set.Weld® material\/thickness presets.\u003c\/strong\u003e Select material type and thickness from the front panel — the machine auto-sets voltage and wire feed speed. Reduces setup time for shops that switch between mild steel, stainless, and aluminum frequently. ArcFX® Technology provides an optimized welding arc for each process at the selected parameters.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMemory program storage for repeat jobs.\u003c\/strong\u003e Save up to 10 welding programs (voltage, wire feed speed, process) to named memory slots. Restore any program instantly at the front panel. Useful for production environments where the same joint is welded repeatedly across multiple material gauges and positions.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual voltage — 120 V \/ 230 V, no rewiring.\u003c\/strong\u003e A rear-panel voltage selector switches between 120 V and 230 V input without opening the machine. One machine services 120 V shop circuits and 230 V dedicated welding outlets. Particularly useful for mobile fabricators, auto body shops, and service techs who work across multiple facilities.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncludes TIG torch, MIG gun, and drive rolls — ready to weld out of the box.\u003c\/strong\u003e The K5379-1 includes a Magnum PRO 175L MIG gun (10 ft), a Caliber 17 Series 150 A TIG torch with flexible head (10 ft), work cable, electrode holder, and multiple drive roll sets for .025\"–.045\" solid and .030\"–.045\" flux-cored wire. No additional equipment required to start MIG, Stick, or TIG welding.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3-year Lincoln Electric warranty on new units.\u003c\/strong\u003e Full factory warranty on the K5379-1 power source.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"recon-crosslink\"\u003e\n  \u003cstrong\u003eLooking to save up to 35%?\u003c\/strong\u003e Browse \u003ca href=\"https:\/\/weldingmart.com\/collections\/used-mig-welders\"\u003eFactory Demo MIG Welders\u003c\/a\u003e — same Lincoln quality, factory-tested, restocked frequently.\n\u003c\/div\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"pdp-specs-table\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU \/ Model\u003c\/td\u003e\n\u003ctd\u003eK5379-1 \/ POWER MIG® 220 AC\/DC Multi-Process Welder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProcesses\u003c\/td\u003e\n\u003ctd\u003eMIG (GMAW), Flux-Cored (FCAW), DC TIG (GTAW), AC TIG (GTAW), Stick (SMAW)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e120 V or 230 V, 1-Phase, 60 Hz (switch-selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput Range (MIG)\u003c\/td\u003e\n\u003ctd\u003e120 V: 20–125 A  |  230 V: 20–230 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput Range (TIG)\u003c\/td\u003e\n\u003ctd\u003e120 V: 20–140 A  |  230 V: 20–210 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput Range (Stick)\u003c\/td\u003e\n\u003ctd\u003e120 V: 30–90 A  |  230 V: 30–200 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output (120 V — MIG)\u003c\/td\u003e\n\u003ctd\u003e95 A \/ 18.8 V \/ 40%  |  75 A \/ 17.8 V \/ 100%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output (230 V — MIG)\u003c\/td\u003e\n\u003ctd\u003e230 A \/ 25.5 V \/ 15%  |  120 A \/ 20.0 V \/ 100%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output (230 V — TIG)\u003c\/td\u003e\n\u003ctd\u003e210 A \/ 18.4 V \/ 20%  |  130 A \/ 15.2 V \/ 100%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAC TIG Frequency\u003c\/td\u003e\n\u003ctd\u003eAdjustable 20–100 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAC TIG Balance\u003c\/td\u003e\n\u003ctd\u003eAdjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTIG Pulsed DC\u003c\/td\u003e\n\u003ctd\u003eYes — included\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWire Feed Speed\u003c\/td\u003e\n\u003ctd\u003e79–512 IPM (2.0–13.0 m\/min)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWire Diameter (Solid)\u003c\/td\u003e\n\u003ctd\u003e.025\"–.035\" (0.6–0.9 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWire Diameter (Flux-Cored)\u003c\/td\u003e\n\u003ctd\u003e.030\"–.045\" (0.8–1.1 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSpool Gun Ready\u003c\/td\u003e\n\u003ctd\u003eYes — Magnum PRO 100SG \/ 150SG compatible (adapter included)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePhase\u003c\/td\u003e\n\u003ctd\u003eSingle-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e51 lbs (23.1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions (H×W×D)\u003c\/td\u003e\n\u003ctd\u003e15\" × 11\" × 24\" (381 × 279 × 610 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Years (Lincoln Electric factory)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew — Lincoln Electric K-prefix (factory-new)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePOWER MIG® 220 AC\/DC Power Source (K5379-1)\u003c\/li\u003e\n  \u003cli\u003eMagnum PRO 175L MIG Gun — 10 ft with fixed gas nozzle assembly\u003c\/li\u003e\n  \u003cli\u003eCaliber 17 Series 150 A Air-Cooled TIG Torch with Flexible Head — 10 ft (K5339-17F-1)\u003c\/li\u003e\n  \u003cli\u003eWork Cable and Clamp — 10 ft\u003c\/li\u003e\n  \u003cli\u003eElectrode Holder with cable\u003c\/li\u003e\n  \u003cli\u003eDrive Rolls: .025\"–.030\" and .035\" solid wire (installed)\u003c\/li\u003e\n  \u003cli\u003eKnurled Drive Roll: .030\"–.045\" flux-cored \/ aluminum\u003c\/li\u003e\n  \u003cli\u003eWire Guide — .025\"–.035\" and .045\"\u003c\/li\u003e\n  \u003cli\u003eGas Inlet Nozzle\u003c\/li\u003e\n  \u003cli\u003eSpool gun adapter\u003c\/li\u003e\n  \u003cli\u003e230 V Input Power Cable with plug\u003c\/li\u003e\n  \u003cli\u003eOperator's Manual\u003c\/li\u003e\n  \u003cli\u003e\u003cem\u003eNote: Shielding gas cylinder, foot pedal, and spool gun are not included — sold separately.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Accessories\u003c\/h2\u003e\n\u003cp\u003eThe POWER MIG 220 AC\/DC's multi-process capability and standard Lincoln connections make it compatible with the full Lincoln Magnum accessories ecosystem:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/mig-welding-cables\"\u003e\u003cstrong\u003eMIG Welding Cables \u0026amp; Power Pins\u003c\/strong\u003e\u003c\/a\u003e — 15 ft and 25 ft Magnum PRO 175L and 250L gun assemblies for extended reach in production MIG; replacement power pins and quick-connect adapters for the K5379-1's built-in Euro-style torch connection.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/mig-contact-tips\"\u003e\u003cstrong\u003eMIG Contact Tips\u003c\/strong\u003e\u003c\/a\u003e — .025\", .030\", and .035\" Magnum contact tips for mild steel and stainless solid wire; .030\"–.045\" tips for flux-cored; aluminum-rated copper-alloy tips for ER4043 and ER5356 wire fed through the spool gun.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/mig-welding-guns\"\u003e\u003cstrong\u003eMIG Welding Guns\u003c\/strong\u003e\u003c\/a\u003e — Magnum PRO 100SG and 150SG spool guns for aluminum MIG; Magnum PRO 250L 15 ft heavy-duty gun for higher-amperage mild steel and structural work; Magnum PRO curve-neck and flex-neck bodies for out-of-position and confined-space welding.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/welding-wire-mig-flux\"\u003e\u003cstrong\u003eMIG Welding Wire\u003c\/strong\u003e\u003c\/a\u003e — Lincoln SuperArc L-56 .025\" and .030\" ER70S-6 for clean-steel MIG on automotive and sheet metal; Lincoln Innershield NR-211-MP flux-cored .030\"–.035\" for self-shielded outdoor work; Lincoln SuperGlaze ER4043 and ER5356 .035\" aluminum wire for spool gun; Lincoln 308L and 309L .030\" stainless wire.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/wire-feed-welder\"\u003e\u003cstrong\u003eWire Feeders\u003c\/strong\u003e\u003c\/a\u003e — The K5379-1 has an integrated wire drive; for multi-station or remote-feed applications, compatible Lincoln LF-74 and Activ8X wire feeders extend the system.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/welding-gas-regulators-top-quality-gas-pressure-control\"\u003e\u003cstrong\u003eWelding Gas Regulators\u003c\/strong\u003e\u003c\/a\u003e — CGA-580 argon\/argon-CO₂ blend flowmeter regulators for MIG on steel and stainless; 100% argon for AC TIG on aluminum; Harris and Lincoln dual-stage regulators for production environments with high gas consumption.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMIG Welding Applications\u003c\/h2\u003e\n\u003cp\u003eThe POWER MIG 220 AC\/DC's ability to handle MIG, Flux-Cored, Stick, and AC\/DC TIG from a single portable 51-pound machine makes it the go-to choice for mixed-process shops and field welders:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAutomotive bodywork and restoration.\u003c\/strong\u003e The .025\"–.030\" wire capability, dual-voltage input, and 230 A maximum MIG output on 230 V cover the full range of automotive sheet metal repair — from 22-gauge door skins and quarter panels (.025\" ER70S-6 at 20–45 A) through full frame repair and frame connector welding (.035\" at 120–160 A). The AC TIG function handles thin-wall stainless exhaust and titanium components without a separate TIG machine in the shop.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight fabrication and prototyping.\u003c\/strong\u003e For small fabrication shops building brackets, jigs, furniture, trailers, and enclosures in mild steel and stainless, the Ready.Set.Weld® presets eliminate parameter guesswork between jobs. The 10-program memory lets fabricators save settings for each recurring part — switch from 14-gauge steel to 3\/16\" structural without re-dialing parameters.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStructural steel welding — light to medium.\u003c\/strong\u003e On 230 V, the POWER MIG 220 AC\/DC delivers 230 A MIG output with .035\" ER70S-6, covering AWS D1.1 structural fillet welds on 1\/4\" and 5\/16\" mild steel. For outdoor structural applications, the flux-cored FCAW capability with Lincoln Innershield NR-211-MP eliminates the need for shielding gas — essential for tack welding, site repairs, and windy conditions where gas coverage is unreliable.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSheet metal and HVAC.\u003c\/strong\u003e The dual-voltage design means the K5379-1 runs on either a 120 V shop outlet or a 230 V dedicated circuit — critical for HVAC installation and sheet metal ductwork where available power varies by job site. At 120 V, 20–75 A MIG handles 24–18 gauge galvanized steel with ER70S-6 .025\". At 230 V, heavier gauge duct-work, flanges, and supports are within range.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAluminum MIG and TIG — marine, aerospace, and motorsports.\u003c\/strong\u003e The built-in spool gun circuitry and AC TIG capability make the 220 AC\/DC unusually capable for a machine at this price and weight. Aluminum MIG with a Magnum PRO 100SG spool gun handles .035\"–3\/64\" 5356 wire on 1\/8\"–1\/4\" 6061 plate — boat hull tack-ups, hardtop frames, motorcycle sub-frames, and aerospace maintenance brackets. AC TIG at 20–210 A handles precision welds on thin aluminum extrusions, heat exchangers, and aircraft fittings where MIG spatter is unacceptable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What is the voltage range of the POWER MIG 220 AC\/DC on 230 V input?\u003c\/strong\u003e\n  \u003cp\u003eOn 230 V input, the welding output voltage range is approximately 15–28 V in MIG mode, which corresponds to the 20–230 A output range. The machine uses constant voltage (CV) mode for MIG and flux-cored, and constant current (CC) mode for Stick and TIG. Welding voltage is continuously adjustable via the front-panel voltage knob with digital readout. Per the \u003ca href=\"https:\/\/www.lincolnelectric.com\/en-us\/products\/power-mig-220-ac-dc-multi-process-welder\/K5379-1\"\u003eLincoln Electric product page\u003c\/a\u003e, rated MIG output on 230 V is 230 A \/ 25.5 V at 15% duty cycle, and 120 A \/ 20.0 V at 100% duty cycle.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What wire sizes are compatible with the POWER MIG 220 AC\/DC?\u003c\/strong\u003e\n  \u003cp\u003eThe K5379-1 feeds .025\"–.035\" solid wire (ER70S-6, ER308L, ER4043, ER5356) and .030\"–.045\" flux-cored wire through the integrated drive. Wire feed speed range is 79–512 IPM (2.0–13.0 m\/min). For aluminum MIG, the optional Magnum PRO 100SG or 150SG spool gun handles ER4043 and ER5356 .035\" and 3\/64\" aluminum wire — the integrated wire drive is not recommended for pushing aluminum wire over 10 ft gun lengths without a spool gun.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Is the POWER MIG 220 AC\/DC single-phase or three-phase?\u003c\/strong\u003e\n  \u003cp\u003eSingle-phase only — the K5379-1 requires 120 V \/ 1-phase \/ 60 Hz or 230 V \/ 1-phase \/ 60 Hz input. It is not compatible with three-phase power. For production environments requiring three-phase input and higher continuous output, see the \u003ca href=\"https:\/\/weldingmart.com\/products\/lincoln-idealarc-cv-400-mig-welder-k1346-13\"\u003eLincoln Idealarc CV-400 (K1346-13)\u003c\/a\u003e which operates on 230\/460 V three-phase.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What is the duty cycle at maximum MIG output on 230 V?\u003c\/strong\u003e\n  \u003cp\u003eAt maximum MIG output on 230 V (230 A \/ 25.5 V), duty cycle is 15%. At 120 A \/ 20.0 V on 230 V, duty cycle is 100%. In practical production MIG welding on 1\/8\"–3\/16\" steel at 150–180 A, most operators weld well within the 100% continuous range. The 15% duty cycle at 230 A reflects the machine's capacity ceiling for short high-amperage burst welds on thicker material — not typical continuous production output.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Is the POWER MIG 220 AC\/DC spool gun ready for aluminum MIG?\u003c\/strong\u003e\n  \u003cp\u003eYes — the K5379-1 has built-in spool gun circuitry and includes a spool gun adapter. Compatible spool guns are the Lincoln Magnum PRO 100SG (100 A, 1 lb spool) and Magnum PRO 150SG (150 A, 1 lb spool), both sold separately. Spool gun-ready circuitry detects the spool gun connection and automatically adjusts wire feed control to the gun-mounted trigger and wire speed potentiometer. Aluminum MIG with a spool gun delivers cleaner welds on ER4043 and ER5356 wire than push-style feeding through a standard liner over distances beyond 6 ft.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the voltage range of the POWER MIG 220 AC\/DC on 230 V input?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"On 230 V input, the welding output voltage range is approximately 15-28 V in MIG mode. Rated MIG output on 230 V is 230 A \/ 25.5 V at 15% duty cycle, and 120 A \/ 20.0 V at 100% duty cycle. Voltage is continuously adjustable via the front-panel knob with digital readout.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What wire sizes are compatible with the POWER MIG 220 AC\/DC?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The K5379-1 feeds .025-.035 in solid wire (ER70S-6, ER308L, ER4043, ER5356) and .030-.045 in flux-cored wire. Wire feed speed range is 79-512 IPM. For aluminum MIG, the optional Magnum PRO 100SG or 150SG spool gun is recommended for ER4043 and ER5356 aluminum wire.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the POWER MIG 220 AC\/DC single-phase or three-phase?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Single-phase only. The K5379-1 requires 120 V \/ 1-phase \/ 60 Hz or 230 V \/ 1-phase \/ 60 Hz input. It is not compatible with three-phase power. For three-phase production environments, see the Lincoln Idealarc CV-400 (K1346-13).\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the duty cycle at maximum MIG output on 230 V?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"At maximum MIG output on 230 V (230 A \/ 25.5 V), duty cycle is 15%. At 120 A \/ 20.0 V on 230 V, duty cycle is 100%. In practical production MIG welding at 150-180 A, most operators work well within the 100% continuous range.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the POWER MIG 220 AC\/DC spool gun ready for aluminum MIG?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes -- the K5379-1 has built-in spool gun circuitry and includes a spool gun adapter. Compatible spool guns are the Lincoln Magnum PRO 100SG and Magnum PRO 150SG (both sold separately). Spool gun-ready circuitry detects the connection and automatically adjusts wire feed control to the gun-mounted trigger.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n","brand":"Lincoln Electric","offers":[{"title":"Default Title","offer_id":45637392924823,"sku":"K5379-1","price":2999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/k5379-1DBD.png?v=1757888167"},{"product_id":"lincoln-flexcut-35-plasma-cutter","title":"Lincoln FlexCut 35 Plasma Cutter","description":"\u003cstyle\u003e\n.pdp-specs-table { width:100%; border-collapse:collapse; font-family:Arial,sans-serif; margin-bottom:16px; }\n.pdp-specs-table tr:nth-child(odd) { background:#f5f5f5; }\n.pdp-specs-table td { padding:10px 12px; border-bottom:1px solid #ddd; vertical-align:top; }\n.pdp-specs-table td:first-child { width:34%; font-weight:600; }\n.pdp-faq { margin-bottom:12px; }\n.pdp-faq strong { display:block; margin-bottom:4px; }\n.recon-crosslink { background:#fff8f0; border-left:4px solid #e07b00; padding:14px 18px; margin:24px 0; border-radius:3px; }\n\u003c\/style\u003e\n\n\u003ch2\u003eWhy Choose the Lincoln Electric FlexCut 35 Plasma Cutter?\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLincoln Electric FlexCut 35\u003c\/strong\u003e is the entry point in Lincoln Electric's newest generation of portable air plasma cutters — a completely redesigned lineup replacing the older Tomahawk series with advanced technology at every power level. As highlighted in \u003ca href=\"https:\/\/www.lincolnelectric.com\/en\/products\/equipment\/cutting-equipment\/handheld-air-plasma-cutters\/flexcut-plasma-cutters\"\u003eLincoln Electric's FlexCut plasma overview\u003c\/a\u003e, the FlexCut 35 delivers 35 amps of cutting power with 100% duty cycle, cuts mild steel, stainless steel, and aluminum up to 1\/2 in. thick, and operates on dual-voltage 120V or 230V single-phase input — the most versatile entry-level plasma cutter Lincoln Electric has ever built.\u003c\/p\u003e\n\u003cp\u003eThe FlexCut 35 introduces several upgrades over previous Lincoln Electric portable plasma designs: an \u003cstrong\u003eintuitive LCD display\u003c\/strong\u003e with guided setup for cutting, gouging, and grid-cutting modes; \u003cstrong\u003eincreased airflow\u003c\/strong\u003e for improved arc stability and cut quality; a \u003cstrong\u003eParts-in-Place detection system\u003c\/strong\u003e that prevents arc initiation with improperly assembled consumables; and an integrated air dryer to protect consumables from compressor moisture. The 25-ft FlexConnect torch system allows quick torch head or cable swaps without replacing the full torch assembly — reducing the cost of transitioning between handheld and mechanized configurations.\u003c\/p\u003e\n\u003cp\u003eAt 120V, the FlexCut 35 runs on any standard 15 or 20 amp household or job-site circuit, making it the go-to plasma cutter for HVAC technicians and electricians who need a plasma cutter on job sites without a 230V supply. At 230V, the full 35 A output cuts thicker material and maintains the rated 100% duty cycle for sustained sheet metal cutting in small fabrication shops and school welding labs.\u003c\/p\u003e\n\u003cp\u003eLincoln Electric backs the FlexCut line with a \u003cstrong\u003e5-year factory warranty\u003c\/strong\u003e — double the coverage of Lincoln Electric's previous Tomahawk portable plasma series — reflecting the engineering confidence behind the redesigned platform. The FlexCut 35 includes a complete consumable package (nozzles, diffusers, electrodes, drag cups) so you can start cutting on day one.\u003c\/p\u003e\n\n\u003cdiv class=\"recon-crosslink\"\u003e\n  \u003cstrong\u003eLooking to save up to 35%?\u003c\/strong\u003e See \u003ca href=\"https:\/\/weldingmart.com\/collections\/demo-plasma-cutters\"\u003eFactory Demo Plasma Cutters\u003c\/a\u003e for certified factory-tested units at significant savings — restocked frequently.\n\u003c\/div\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"pdp-specs-table\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU \/ Model\u003c\/td\u003e\n\u003ctd\u003eFlexCut 35 (Handheld Ready-Pak: K5821-H)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProcess\u003c\/td\u003e\n\u003ctd\u003ePlasma Cutting, Gouging, Grid-Cutting (PAC)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput (Amps)\u003c\/td\u003e\n\u003ctd\u003e35 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e120V or 230V, Single-Phase, 50\/60 Hz (dual-voltage)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDuty Cycle\u003c\/td\u003e\n\u003ctd\u003e100% at rated output\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCut Capacity — Mild Steel (Recommended)\u003c\/td\u003e\n\u003ctd\u003e3\/8 in. (9.5 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCut Capacity — Mild Steel (Maximum)\u003c\/td\u003e\n\u003ctd\u003e1\/2 in. (12.7 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eMild steel, stainless steel, aluminum, and other conductive metals\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eArc Start\u003c\/td\u003e\n\u003ctd\u003eNon-High-Frequency (touch-start \/ contact) — electronics safe\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eLCD display with guided mode selection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTorch System\u003c\/td\u003e\n\u003ctd\u003eFlexConnect — quick-swap torch heads and cables\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIntegrated Air Dryer\u003c\/td\u003e\n\u003ctd\u003eYes — built-in inline air dryer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCNC \/ Mechanized Ready\u003c\/td\u003e\n\u003ctd\u003eNo (35 is handheld only; 45 and above are CNC-ready)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years — Lincoln Electric factory (new FlexCut line)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew — Lincoln Electric K-prefix (factory-new)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlexCut 35 Plasma Cutter Power Source\u003c\/li\u003e\n  \u003cli\u003e25 ft FlexConnect Handheld Torch\u003c\/li\u003e\n  \u003cli\u003eWork Cable \u0026amp; Ground Clamp\u003c\/li\u003e\n  \u003cli\u003eInput Power Cord\u003c\/li\u003e\n  \u003cli\u003eComplete Consumable Package: nozzles, diffusers, electrodes, drag cups\u003c\/li\u003e\n  \u003cli\u003eOperator's manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Accessories\u003c\/h2\u003e\n\u003cp\u003eExtend your FlexCut 35's versatility with WeldingMart's Lincoln-compatible accessories:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/plasma-torches\"\u003e\u003cstrong\u003ePlasma Torches\u003c\/strong\u003e\u003c\/a\u003e — FlexConnect replacement torch heads and cables; extended-reach bodies for cutting pipe and tube from awkward angles; drag shield attachments for guided freehand cutting on flat plate.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/plasma-consumables\"\u003e\u003cstrong\u003ePlasma Consumables\u003c\/strong\u003e\u003c\/a\u003e — FlexCut-compatible electrodes, nozzles, swirl rings, and shields for the FlexConnect torch system; multi-pack consumable kits for HVAC and sheet metal production runs; gouging nozzle kits for weld removal and joint preparation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/welding-gas-regulators-top-quality-gas-pressure-control\"\u003e\u003cstrong\u003eAir Regulators \u0026amp; Inline Filters\u003c\/strong\u003e\u003c\/a\u003e — Inline moisture separators and particulate filters for compressor air supply; portable mini-dryers for job-site use; quick-disconnect air fittings for fast tool changes between plasma cutter and air tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePlasma Cutting Applications\u003c\/h2\u003e\n\u003cp\u003eThe FlexCut 35's dual-voltage input, 100% duty cycle, and 1\/2 in. cut capacity make it a genuinely versatile tool across light to medium cutting tasks:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHVAC ductwork and sheet metal.\u003c\/strong\u003e On 120V at the job site, the FlexCut 35 cuts galvanized duct, register boxes, and sheet metal panels in 26-gauge through 14-gauge without needing a 240V circuit. The built-in air dryer protects consumables from the variable compressed air quality found on job sites. Faster and cleaner than snips on heavier duct stock and produces no tin snip burrs on cut edges.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAutomotive bodywork and restoration.\u003c\/strong\u003e On 230V in the shop, 35 A is sufficient to cut floor pans, rocker panels, quarter panels, and patch panels in 20-gauge and 18-gauge steel with minimal heat distortion. The non-HF start is safe near vehicle wiring harnesses and control modules. FlexConnect torch allows switching to a shorter torch head for tight underbody access cuts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStructural steel and home fabrication.\u003c\/strong\u003e Cuts flat bar, angle iron, and square tube up to 3\/8 in. on 230V for home shop brackets, gates, and trailer repairs. Small enough to store on a workbench, light enough to carry to the work, and dual-voltage enough to run from the garage outlet or a job-site generator.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArt, custom metalwork, and makerspaces.\u003c\/strong\u003e Sheet steel art projects, decorative panels, and custom hardware cut from flat stock using drag shield guides or freehand on a cutting table. The guided LCD setup makes it accessible for students and artists who are new to plasma cutting without requiring adjustment of separate gas regulators or HF interference concerns.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDemolition, scrap prep, and MRO.\u003c\/strong\u003e Cuts expanded metal, painted structural steel, and corroded material in field MRO and light demolition work on 120V extension cord power. Consumable protection from the Parts-in-Place system and built-in air dryer means fewer arc-start failures on inconsistent field air supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What thickness of steel can the FlexCut 35 cut?\u003c\/strong\u003e\n  \u003cp\u003eThe FlexCut 35 is rated to cut mild steel up to 1\/2 in. (12.7 mm) maximum and up to 3\/8 in. (9.5 mm) at recommended production cutting speed. At 120V input, performance is reduced — recommended capacity on 120V is approximately 1\/4 in. For consistent cuts at full rated capacity, use 230V input. The machine also cuts stainless steel and aluminum at comparable thicknesses to mild steel. Per \u003ca href=\"https:\/\/www.lincolnelectric.com\/en\/products\/equipment\/cutting-equipment\/handheld-air-plasma-cutters\/flexcut-plasma-cutters\"\u003eLincoln Electric's FlexCut product family page\u003c\/a\u003e, the FlexCut 35 covers the entry-range of the new FlexCut lineup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What duty cycle does the FlexCut 35 have?\u003c\/strong\u003e\n  \u003cp\u003eThe FlexCut 35 is rated at 100% duty cycle at rated output — meaning it can cut continuously without thermal shutdown. This is a significant improvement over prior Lincoln Electric portable plasma cutters in the 30–40 A range, which were typically rated at 35–50% duty cycle. For production sheet metal cutting tasks where continuous arc time is important, the 100% duty cycle eliminates the waiting intervals common on lower duty-cycle machines.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Does the FlexCut 35 have a pilot arc for expanded metal and painted steel?\u003c\/strong\u003e\n  \u003cp\u003eThe FlexCut 35 uses a non-high-frequency touch\/contact arc start system with a rapid arc restrike feature that maintains the arc through gaps in expanded metal, perforated plate, and interrupted surfaces. While not a blown pilot arc like a larger industrial system, the restrike technology delivers similar practical performance for hand cutting on typical fabrication materials. For solid steel plate, the arc start is reliable and consistent through paint and mill scale without grinding a clean start spot.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Is the FlexCut 35 compatible with a CNC plasma cutting table?\u003c\/strong\u003e\n  \u003cp\u003eNo. The FlexCut 35 is a handheld-only plasma system and does not include a CNC interface port. Per Lincoln Electric's FlexCut lineup, the FlexCut 45 (K5823 series) and all larger models (65, 85, 105, 125) include CNC-ready ports and are compatible with plasma cutting tables using mechanized torch packages. If CNC table integration is your primary requirement, see the \u003ca href=\"https:\/\/weldingmart.com\/products\/lincoln-flexcut-80-plasma-cutter-ps-only-k4809-1\"\u003eFlexCut 80 (K4809-1)\u003c\/a\u003e or \u003ca href=\"https:\/\/weldingmart.com\/products\/lincoln-flexcut-125-plasma-cutter-ps-only-k4811-1\"\u003eFlexCut 125 (K4811-1)\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What air compressor is needed for the FlexCut 35?\u003c\/strong\u003e\n  \u003cp\u003eThe FlexCut 35 requires compressed air at approximately 80–100 PSI with adequate flow for the torch size. A standard portable compressor with 4+ SCFM at 90 PSI and a 6-gallon or larger tank is sufficient for intermittent to moderate cutting. The built-in air dryer removes moisture from the compressed air supply before it reaches the torch consumables — a significant convenience feature that eliminates the need for a separate inline desiccant dryer in most job-site and shop environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What thickness of steel can the FlexCut 35 cut?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The FlexCut 35 cuts mild steel up to 1\/2 in. (12.7 mm) maximum and 3\/8 in. recommended at production speed. On 120V, recommended capacity is approximately 1\/4 in. It also cuts stainless steel and aluminum at comparable thicknesses.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What duty cycle does the FlexCut 35 have?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The FlexCut 35 is rated at 100% duty cycle at rated output — it can cut continuously without thermal shutdown, a significant improvement over prior Lincoln Electric portable plasma cutters in this amperage range.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the FlexCut 35 have a pilot arc for expanded metal and painted steel?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The FlexCut 35 uses a non-high-frequency touch start with rapid arc restrike for cutting expanded metal and interrupted surfaces. Arc start is reliable through paint and mill scale without grinding a clean start spot.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the FlexCut 35 compatible with a CNC plasma cutting table?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"No. The FlexCut 35 is handheld-only and does not include a CNC interface port. The FlexCut 45 and larger models (65, 85, 105, 125) are CNC-ready.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What air compressor is needed for the FlexCut 35?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The FlexCut 35 requires approximately 80-100 PSI compressed air. A compressor with 4+ SCFM at 90 PSI and a 6-gallon or larger tank is sufficient. The built-in air dryer removes moisture without requiring a separate inline desiccant dryer.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n","brand":"Lincoln Electric","offers":[{"title":"FlexCut 35 Air Handheld Torch Ready-Pak","offer_id":46417541791895,"sku":"K5822-H","price":2099.99,"currency_code":"USD","in_stock":true},{"title":"FlexCut 35 Air Power Source Only","offer_id":46418608619671,"sku":"K5822-PS","price":1299.99,"currency_code":"USD","in_stock":true},{"title":"FlexCut 35 Handheld Torch Ready-Pak","offer_id":46417349279895,"sku":"K5821-H","price":1799.99,"currency_code":"USD","in_stock":true},{"title":"FlexCut 35 Power Source Only","offer_id":46417455382679,"sku":"K5821-PS","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/K5821_FlexCut-35_007.jpg?v=1765821622"},{"product_id":"lincoln-flexcut-45-plasma-cutter","title":"Lincoln FlexCut 45 Plasma Cutter","description":"\u003cstyle\u003e\n.pdp-specs-table { width:100%; border-collapse:collapse; font-family:Arial,sans-serif; margin-bottom:16px; }\n.pdp-specs-table tr:nth-child(odd) { background:#f5f5f5; }\n.pdp-specs-table td { padding:10px 12px; border-bottom:1px solid #ddd; vertical-align:top; }\n.pdp-specs-table td:first-child { width:34%; font-weight:600; }\n.pdp-faq { margin-bottom:12px; }\n.pdp-faq strong { display:block; margin-bottom:4px; }\n.recon-crosslink { background:#fff8f0; border-left:4px solid #e07b00; padding:14px 18px; margin:24px 0; border-radius:3px; }\n\u003c\/style\u003e\n\n\u003ch2\u003eWhy Choose the Lincoln Electric FlexCut 45 Plasma Cutter?\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLincoln Electric FlexCut 45\u003c\/strong\u003e is the mid-entry model in Lincoln Electric's completely redesigned FlexCut plasma cutter lineup — the most significant upgrade to Lincoln Electric's portable plasma range in years. According to \u003ca href=\"https:\/\/www.lincolnelectric.com\/en\/products\/equipment\/cutting-equipment\/handheld-air-plasma-cutters\/flexcut-plasma-cutters\"\u003eLincoln Electric's FlexCut plasma overview\u003c\/a\u003e, the FlexCut 45 delivers 45 amps of cutting power, cuts mild steel up to 7\/8 in. thick, and operates on dual-voltage 120V or 230V single-phase input. Unlike the FlexCut 35, the FlexCut 45 is CNC table-ready out of the box for any shop that wants to grow into automated cutting.\u003c\/p\u003e\n\u003cp\u003eThe FlexCut 45 features an \u003cstrong\u003eLCD display with guided process selection\u003c\/strong\u003e (cutting, gouging, grid\/expanded metal cutting), a \u003cstrong\u003eParts-in-Place consumable detection system\u003c\/strong\u003e, a built-in inline air dryer, and the FlexConnect torch system for rapid torch head or cable swap. The non-HF arc start with rapid arc restrike delivers consistent pilot arc performance on expanded metal, painted surfaces, and rusty steel without grinding. At 100% duty cycle, the FlexCut 45 runs continuously in sheet metal production without thermal downtime.\u003c\/p\u003e\n\u003cp\u003eAt 45 amps, the FlexCut 45 covers the most common range of professional plasma cutting tasks: 14-gauge through 1\/2 in. mild steel at production speed, with the ability to cut up to 7\/8 in. for structural sections and thicker plate. The dual-voltage input makes it the right machine for contractors who need 120V job-site operation and 230V shop performance from the same unit — no tools required to switch input voltage.\u003c\/p\u003e\n\u003cp\u003eLincoln Electric backs the FlexCut 45 with a \u003cstrong\u003e5-year factory warranty\u003c\/strong\u003e — the longest standard warranty on any Lincoln Electric portable plasma cutter. The complete consumable kit ships in the box, so you're cutting immediately on delivery.\u003c\/p\u003e\n\n\u003cdiv class=\"recon-crosslink\"\u003e\n  \u003cstrong\u003eLooking to save more?\u003c\/strong\u003e See \u003ca href=\"https:\/\/weldingmart.com\/collections\/demo-plasma-cutters\"\u003eFactory Demo Plasma Cutters\u003c\/a\u003e for certified factory-tested machines at significant savings — restocked frequently.\n\u003c\/div\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"pdp-specs-table\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU \/ Model\u003c\/td\u003e\n\u003ctd\u003eFlexCut 45 (Handheld Ready-Pak: K5823-H | Mechanized Ready-Pak: K5823-M)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProcess\u003c\/td\u003e\n\u003ctd\u003ePlasma Cutting, Gouging, Grid-Cutting (PAC)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput (Amps)\u003c\/td\u003e\n\u003ctd\u003e45 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e120V or 230V, Single-Phase, 50\/60 Hz (dual-voltage)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDuty Cycle\u003c\/td\u003e\n\u003ctd\u003e100% at rated output\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCut Capacity — Mild Steel (Recommended)\u003c\/td\u003e\n\u003ctd\u003e5\/8 in. (16 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCut Capacity — Mild Steel (Maximum)\u003c\/td\u003e\n\u003ctd\u003e7\/8 in. (22 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eMild steel, stainless steel, aluminum, and other conductive metals\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eArc Start\u003c\/td\u003e\n\u003ctd\u003eNon-High-Frequency (touch-start \/ rapid arc restrike) — CNC-safe\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eLCD display with guided mode selection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTorch System\u003c\/td\u003e\n\u003ctd\u003eFlexConnect — quick-swap torch heads and cables\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIntegrated Air Dryer\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCNC \/ Mechanized Ready\u003c\/td\u003e\n\u003ctd\u003eYes — built-in CPC port for mechanized torch and CNC table integration\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAir Pressure Required\u003c\/td\u003e\n\u003ctd\u003e80–120 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years — Lincoln Electric factory (new FlexCut line)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew — Lincoln Electric K-prefix (factory-new)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlexCut 45 Plasma Cutter Power Source\u003c\/li\u003e\n  \u003cli\u003e25 ft FlexConnect Handheld or Mechanized Torch (based on Ready-Pak selected)\u003c\/li\u003e\n  \u003cli\u003eWork Cable \u0026amp; Ground Clamp\u003c\/li\u003e\n  \u003cli\u003eInput Power Cord\u003c\/li\u003e\n  \u003cli\u003eComplete Consumable Package: nozzles, diffusers, electrodes, drag cups, swirl ring\u003c\/li\u003e\n  \u003cli\u003eIntegrated air dryer with airline attachment\u003c\/li\u003e\n  \u003cli\u003eOperator's manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Accessories\u003c\/h2\u003e\n\u003cp\u003eExpand your FlexCut 45's capability with WeldingMart-stocked Lincoln accessories:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/plasma-torches\"\u003e\u003cstrong\u003ePlasma Torches\u003c\/strong\u003e\u003c\/a\u003e — FlexConnect handheld torches in 25 ft lengths; mechanized torch packages for CNC table integration; flexible torch heads and extended-reach bodies for cutting pipe, structural sections, and confined-space cuts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/plasma-consumables\"\u003e\u003cstrong\u003ePlasma Consumables\u003c\/strong\u003e\u003c\/a\u003e — FlexCut-series electrodes, nozzles, shields, and drag cups; multi-pack production consumable kits for sustained sheet metal and structural cutting; gouging nozzle sets for weld removal and joint preparation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/welding-gas-regulators-top-quality-gas-pressure-control\"\u003e\u003cstrong\u003eAir Regulators \u0026amp; Filters\u003c\/strong\u003e\u003c\/a\u003e — Inline moisture separators and particulate filters for job-site compressor air; portable desiccant dryers for extended field operation; quick-disconnect fittings for fast plasma-to-air-tool changeovers on job sites.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePlasma Cutting Applications\u003c\/h2\u003e\n\u003cp\u003eThe FlexCut 45's 45 A output, CNC-ready port, and 7\/8 in. cut capacity make it the crossover tool between light portable and professional-grade plasma cutting:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHVAC ductwork — on-site and in-shop.\u003c\/strong\u003e At 120V on the job site, cuts 26-gauge through 3\/16 in. galvanized and stainless duct, structural HVAC angles, and equipment curbs. At 230V back in the shop, the same machine handles 1\/4 in. and 3\/8 in. steel strut, equipment pads, and custom sheet metal fabrication. The built-in air dryer handles job-site air quality without a separate filter kit.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAutomotive bodywork and restoration.\u003c\/strong\u003e The FlexCut 45 at 45 A cuts floor pans, frame sections, rocker panels, and suspension brackets from 18-gauge through 3\/8 in. without consumable changes between thicknesses. The rapid arc restrike function maintains cutting continuity through rust pits and paint layers common in restoration work. Non-HF start is safe adjacent to fuel system sensors and vehicle electronics.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStructural steel fabrication.\u003c\/strong\u003e On 230V, cuts flat bar, square tube, angle, and plate up to 5\/8 in. recommended for structural repairs, equipment frames, and custom brackets. The CNC-ready port allows the same power source to run a small CNC plasma table for production part cutting when handheld precision isn't required.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArt, custom fabrication, and makerspaces.\u003c\/strong\u003e 45 A covers the full range of sheet metal art applications from 20-gauge decorative panels through 3\/8 in. structural art plate. The LCD guided setup is accessible for students and artists new to plasma cutting; the FlexConnect torch system allows quick changes between detailed cutting heads and standard drag-shield torch configurations.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDemolition, scrap prep, and field MRO.\u003c\/strong\u003e On a 120V extension cord, the FlexCut 45 cuts structural angle, rebar, painted structural steel, and heavy expanded metal in field maintenance and demolition contexts. The 7\/8 in. maximum cut capacity handles heavier structural members than typical 30–40 A portable plasma cutters, giving field crews more capability per machine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What steel thickness can the FlexCut 45 cut?\u003c\/strong\u003e\n  \u003cp\u003eThe FlexCut 45 cuts mild steel up to 7\/8 in. (22 mm) maximum and up to 5\/8 in. (16 mm) at recommended production cutting speed on 230V input. On 120V, rated performance is reduced — typical production cutting on 120V is best limited to 1\/4 in. The machine also cuts stainless steel and aluminum at comparable thicknesses. Per \u003ca href=\"https:\/\/www.lincolnelectric.com\/en\/products\/equipment\/cutting-equipment\/handheld-air-plasma-cutters\/flexcut-plasma-cutters\"\u003eLincoln Electric's FlexCut specifications\u003c\/a\u003e, the FlexCut 45 is the smallest model in the lineup with 7\/8 in. capacity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What duty cycle does the FlexCut 45 have?\u003c\/strong\u003e\n  \u003cp\u003eThe FlexCut 45 is rated at 100% duty cycle at rated output on 230V input. This means the machine can run continuously without thermal shutdown at full 45 A cutting power — a significant capability for production sheet metal cutting. On 120V, sustained duty cycle at maximum 120V output may be lower; for all-day production cutting, 230V input is recommended.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Does the FlexCut 45 have a pilot arc?\u003c\/strong\u003e\n  \u003cp\u003eThe FlexCut 45 uses a non-high-frequency touch start with rapid arc restrike technology. The restrike function rapidly re-establishes the plasma arc after crossing gaps in expanded metal, perforated sheet, or corroded surfaces, delivering consistent cutting continuity on interrupted-surface work. The non-HF design avoids electromagnetic interference with CNC controllers, vehicle electronics, and sensitive shop equipment near the cutting area.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Is the FlexCut 45 compatible with a CNC plasma cutting table?\u003c\/strong\u003e\n  \u003cp\u003eYes. The FlexCut 45 includes a built-in CPC port for connecting a mechanized machine torch and integrating with CNC plasma cutting tables. The mechanized Ready-Pak (K5823-M) ships with a machine torch configured for CNC table mounting. The non-HF arc start and CNC interface signal are compatible with table torch height control (THC) systems. For larger CNC table applications with heavier material requirements, see the \u003ca href=\"https:\/\/weldingmart.com\/products\/lincoln-flexcut-80-plasma-cutter-ps-only-k4809-1\"\u003eFlexCut 80 (K4809-1)\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What air compressor is needed for the FlexCut 45?\u003c\/strong\u003e\n  \u003cp\u003eThe FlexCut 45 requires 80–120 PSI compressed air. A compressor producing 5–7 SCFM at 90 PSI with an 8-gallon or larger tank provides sufficient air for continuous cutting at 45 A. The built-in air dryer removes moisture from the compressed air supply before it reaches torch consumables, extending electrode and nozzle life beyond what an unfiltered direct compressor connection would provide. For sustained CNC or production cutting sessions, a larger compressor (20-gallon, 5 HP, 7+ SCFM) is recommended to prevent pressure drops during extended arc-on time.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What steel thickness can the FlexCut 45 cut?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The FlexCut 45 cuts mild steel up to 7\/8 in. (22 mm) maximum and 5\/8 in. at recommended production speed on 230V. On 120V, best limited to 1\/4 in. for production cutting. Also cuts stainless steel and aluminum at comparable thicknesses.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What duty cycle does the FlexCut 45 have?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The FlexCut 45 is rated at 100% duty cycle at rated output on 230V input — continuous cutting without thermal shutdown at full 45 A power.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the FlexCut 45 have a pilot arc?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The FlexCut 45 uses non-HF touch start with rapid arc restrike for consistent cutting on expanded metal, perforated sheet, and corroded surfaces without electromagnetic interference.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the FlexCut 45 compatible with a CNC plasma cutting table?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The FlexCut 45 includes a built-in CPC port for mechanized machine torch connection and CNC table integration. The mechanized Ready-Pak (K5823-M) ships CNC-configured.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What air compressor is needed for the FlexCut 45?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The FlexCut 45 requires 80-120 PSI with 5-7 SCFM at 90 PSI. An 8-gallon or larger tank is recommended. The built-in air dryer protects consumables from moisture without a separate filter.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n","brand":"Lincoln Electric","offers":[{"title":"FlexCut 45 Handheld Torch Ready-Pak","offer_id":46418878365847,"sku":"K5823-H","price":2499.99,"currency_code":"USD","in_stock":true},{"title":"FlexCut 45 Mechanized Torch Ready-Pak","offer_id":46419126550679,"sku":"K5823-M","price":2599.99,"currency_code":"USD","in_stock":true},{"title":"FlexCut 45 Power Source Only","offer_id":46419275972759,"sku":"K5823-PS","price":1699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/K5823_FlexCut-45_001.jpg?v=1765569667"},{"product_id":"lincoln-flexcut-65-plasma-cutter","title":"Lincoln FlexCut 65 Plasma Cutter","description":"\u003cstyle\u003e\n.pdp-specs-table { width:100%; border-collapse:collapse; font-family:Arial,sans-serif; margin-bottom:16px; }\n.pdp-specs-table tr:nth-child(odd) { background:#f5f5f5; }\n.pdp-specs-table td { padding:10px 12px; border-bottom:1px solid #ddd; vertical-align:top; }\n.pdp-specs-table td:first-child { width:34%; font-weight:600; }\n.pdp-faq { margin-bottom:12px; }\n.pdp-faq strong { display:block; margin-bottom:4px; }\n.recon-crosslink { background:#fff8f0; border-left:4px solid #e07b00; padding:14px 18px; margin:24px 0; border-radius:3px; }\n\u003c\/style\u003e\n\n\u003ch2\u003eWhy Choose the Lincoln Electric FlexCut 65 Plasma Cutter?\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLincoln Electric FlexCut 65\u003c\/strong\u003e is the professional mid-range model in Lincoln Electric's new FlexCut plasma cutter lineup — delivering 65 amps of cutting power to cleanly cut mild steel, stainless steel, and aluminum up to 1 inch thick. As outlined on \u003ca href=\"https:\/\/www.lincolnelectric.com\/en\/products\/equipment\/cutting-equipment\/handheld-air-plasma-cutters\/flexcut-plasma-cutters\"\u003eLincoln Electric's FlexCut plasma page\u003c\/a\u003e, the FlexCut 65 covers the demanding mid-range of professional fabrication work where 35–45 A machines lack capacity and 85+ A machines exceed the power available from single-phase input. The FlexCut 65 accepts 200–600V, single-phase or 3-phase input — the most flexible input range in the FlexCut handheld lineup below the 85.\u003c\/p\u003e\n\u003cp\u003eAt 65 A with 100% duty cycle, the FlexCut 65 is purpose-built for sustained production cutting of structural steel, heavy sheet metal, and plate work in fabrication shops, automotive service facilities, and field crews operating off industrial power. The \u003cstrong\u003eCPC port\u003c\/strong\u003e for mechanized torch integration makes it CNC table-ready for shops that need both handheld and automated cutting from the same machine. The FlexConnect torch system enables fast torch head swaps between handheld, mechanized, and extended-reach configurations without replacing the full torch lead assembly.\u003c\/p\u003e\n\u003cp\u003eLincoln Electric's \u003cstrong\u003eParts-in-Place consumable protection\u003c\/strong\u003e and integrated air dryer carry forward from the FlexCut 35 and 45 — protecting consumable life and reducing arc-start failures on variable job-site and shop air quality. The LCD display with guided process selection covers cutting, gouging, grid-cutting, extended cutting, and precision cutting modes — a wider process range than any comparable 65 A plasma cutter in the market.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003e5-year factory warranty\u003c\/strong\u003e on the FlexCut 65 reflects Lincoln Electric's commitment to the redesigned FlexCut platform. For professional fabricators and contractors who cut 1\/2 to 1 in. plate regularly, the FlexCut 65 provides the production capacity and feature set to handle the work without stepping up to a 3-phase-only 80+ A industrial power source.\u003c\/p\u003e\n\n\u003cdiv class=\"recon-crosslink\"\u003e\n  \u003cstrong\u003eLooking to save up to 35%?\u003c\/strong\u003e See \u003ca href=\"https:\/\/weldingmart.com\/collections\/demo-plasma-cutters\"\u003eFactory Demo Plasma Cutters\u003c\/a\u003e for certified Lincoln Electric factory-tested units — restocked frequently.\n\u003c\/div\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"pdp-specs-table\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU \/ Model\u003c\/td\u003e\n\u003ctd\u003eFlexCut 65 (Handheld Ready-Pak: K5825-H | Mechanized Ready-Pak: K5825-M)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProcess\u003c\/td\u003e\n\u003ctd\u003ePlasma Cutting, Gouging, Grid-Cutting, Extended, Precision (PAC)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput (Amps)\u003c\/td\u003e\n\u003ctd\u003e65 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e200–600V, Single-Phase or 3-Phase, 50\/60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDuty Cycle\u003c\/td\u003e\n\u003ctd\u003e100% at rated output\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCut Capacity — Mild Steel (Recommended)\u003c\/td\u003e\n\u003ctd\u003e3\/4 in. (19 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCut Capacity — Mild Steel (Maximum)\u003c\/td\u003e\n\u003ctd\u003e1 in. (25.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003eMild steel, stainless steel, aluminum, and other conductive metals\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eArc Start\u003c\/td\u003e\n\u003ctd\u003eNon-High-Frequency (touch-start \/ rapid arc restrike) — CNC-safe\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003eLCD display with guided mode selection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTorch System\u003c\/td\u003e\n\u003ctd\u003eFlexConnect — quick-swap torch heads and cables\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIntegrated Air Dryer\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCNC \/ Mechanized Ready\u003c\/td\u003e\n\u003ctd\u003eYes — built-in CPC port, automatic CNC table detection\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAir Pressure Required\u003c\/td\u003e\n\u003ctd\u003e80–120 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e5 Years — Lincoln Electric factory (new FlexCut line)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew — Lincoln Electric K-prefix (factory-new)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFlexCut 65 Plasma Cutter Power Source\u003c\/li\u003e\n  \u003cli\u003e25 ft FlexConnect Handheld or Mechanized Torch (based on Ready-Pak selected)\u003c\/li\u003e\n  \u003cli\u003eWork Cable \u0026amp; Ground Clamp\u003c\/li\u003e\n  \u003cli\u003eInput Power Cord\u003c\/li\u003e\n  \u003cli\u003eComplete Consumable Package: nozzles, diffusers, electrodes, drag cups, swirl ring, shields\u003c\/li\u003e\n  \u003cli\u003eIntegrated air dryer with airline attachment\u003c\/li\u003e\n  \u003cli\u003eOperator's manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Accessories\u003c\/h2\u003e\n\u003cp\u003eMaximize the FlexCut 65's versatility with WeldingMart accessories:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/plasma-torches\"\u003e\u003cstrong\u003ePlasma Torches\u003c\/strong\u003e\u003c\/a\u003e — FlexConnect handheld torches for manual operation; mechanized torch packages in 25 ft and 50 ft leads for CNC table and pipe cutting integration; precision cutting torch heads for tighter kerf and fine-detail work on plate.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/plasma-consumables\"\u003e\u003cstrong\u003ePlasma Consumables\u003c\/strong\u003e\u003c\/a\u003e — FlexCut-series electrodes, nozzles, swirl rings, and shields for the FlexConnect torch system; extended-life consumable packs for production structural steel and plate cutting; gouging electrode kits for weld removal and weld joint face preparation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/welding-gas-regulators-top-quality-gas-pressure-control\"\u003e\u003cstrong\u003eAir Treatment\u003c\/strong\u003e\u003c\/a\u003e — High-flow inline moisture separators and coalescing filters for 65 A production air demand; desiccant dryer cartridge replacements for built-in dryer maintenance; quick-disconnect airline fittings for fast machine repositioning in the shop.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003ePlasma Cutting Applications\u003c\/h2\u003e\n\u003cp\u003eAt 65 A, 100% duty cycle, and 1 in. cut capacity, the FlexCut 65 covers the full range of professional fabrication cutting work:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHVAC ductwork — heavy gauge and structural HVAC fabrication.\u003c\/strong\u003e On single-phase input in the shop, the FlexCut 65 cuts heavy galvanized duct flanges, equipment mounting brackets, and structural curb frames in 3\/16 in. through 1\/2 in. steel at production speed. For HVAC contractors doing commercial equipment installation with heavy structural steel work, the 65 A output handles structural angle and tube steel that exceeds lighter plasma cutters' capacity.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAutomotive bodywork — frame and structural repair.\u003c\/strong\u003e At 65 A, the FlexCut 65 cuts full frame sections, subframe rails, and body-on-frame structural components in 1\/4 in. through 1\/2 in. steel for restoration shops and collision repair facilities doing structural work. Precision cutting mode provides tighter arc focus for body panel patch cuts where kerf width matters for fit-up.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStructural steel fabrication.\u003c\/strong\u003e Cuts plate, flat bar, angle, channel, and tube steel up to 3\/4 in. recommended and 1 in. maximum for structural fabricators, metal buildings contractors, and erection crews. Single-phase input from 200–600V means the FlexCut 65 runs on single-phase service available at most construction sites and fabrication shops without requiring 3-phase installation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eArt, architectural metalwork, and custom fab.\u003c\/strong\u003e Heavy plate art, decorative structural screens, and architectural metalwork elements in 1\/4 in. through 3\/4 in. plate cut clean with minimal dross at 65 A. CNC table integration via the CPC port enables production of complex decorative patterns from flat plate that would be impractical by hand cutting.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDemolition, industrial MRO, and scrap processing.\u003c\/strong\u003e The 1-in. maximum cut capacity and 100% duty cycle handle sustained structural demolition and MRO cutting of heavy beams, pipe, and plate. The multi-process (cut, gouge, grid-cut) capability allows a single machine to handle all plasma cutting and gouging tasks in an industrial MRO environment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What cut capacity does the FlexCut 65 have?\u003c\/strong\u003e\n  \u003cp\u003eThe FlexCut 65 cuts mild steel up to 1 in. (25.4 mm) maximum, with 3\/4 in. (19 mm) as the recommended production cutting capacity. According to \u003ca href=\"https:\/\/www.lincolnelectric.com\/en\/products\/equipment\/cutting-equipment\/handheld-air-plasma-cutters\/flexcut-plasma-cutters\"\u003eLincoln Electric's FlexCut product page\u003c\/a\u003e, the FlexCut 65 is the smallest model in the lineup rated for 1-inch capacity. It also cuts stainless steel and aluminum at similar thicknesses to mild steel. The single-phase input range (200–600V) makes it accessible on typical North American single-phase service without requiring 3-phase power like the larger FlexCut 80 and 125 systems.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What duty cycle does the FlexCut 65 have?\u003c\/strong\u003e\n  \u003cp\u003eThe FlexCut 65 is rated at 100% duty cycle at rated output — continuous plasma cutting without thermal shutdowns at full 65 A. This is the same 100% duty cycle rating as all FlexCut models, which is a defining feature of the new lineup. For production cutting tasks in structural fabrication or sustained CNC table operation, the 100% duty cycle eliminates cooling wait periods entirely at all cutting amperages.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Does the FlexCut 65 have a pilot arc?\u003c\/strong\u003e\n  \u003cp\u003eThe FlexCut 65 uses a non-high-frequency contact start with rapid arc restrike. The restrike feature re-establishes the plasma arc immediately after crossing gaps in expanded metal, perforated plate, and interrupted cut paths. The non-HF design prevents electromagnetic interference with CNC motion controllers and torch height control systems when the FlexCut 65 is used on a cutting table. The Parts-in-Place system adds a further layer of protection by preventing arc initiation with improperly assembled consumables.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Is the FlexCut 65 compatible with a CNC plasma cutting table?\u003c\/strong\u003e\n  \u003cp\u003eYes. The FlexCut 65 is CNC table-ready with a built-in CPC port for mechanized machine torch connection and automatic CNC table detection. The mechanized Ready-Pak (K5825-M) ships with a machine torch configured for CNC table mounting. For shops that need to alternate between handheld and CNC cutting, the FlexConnect torch system allows switching between torch configurations quickly without replacing the power source or lead assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What air supply does the FlexCut 65 require?\u003c\/strong\u003e\n  \u003cp\u003eThe FlexCut 65 requires 80–120 PSI compressed air. At 65 A cutting current, air flow demand is higher than the smaller FlexCut 35 and 45 — a 60-gallon, 5+ HP compressor producing 8–10 SCFM at 100 PSI is suitable for sustained shop production cutting. The built-in air dryer handles moisture removal for typical shop air quality. For CNC table applications with extended continuous cutting, a rotary screw compressor is preferred over a reciprocating compressor to maintain consistent pressure and flow without cycling interruptions.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What cut capacity does the FlexCut 65 have?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The FlexCut 65 cuts mild steel up to 1 in. (25.4 mm) maximum, with 3\/4 in. recommended production capacity. It accepts single-phase 200-600V input, making it accessible without 3-phase power unlike larger systems.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What duty cycle does the FlexCut 65 have?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The FlexCut 65 is rated at 100% duty cycle at rated output — continuous cutting without thermal shutdowns at full 65 A, consistent with all models in the FlexCut lineup.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Does the FlexCut 65 have a pilot arc?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The FlexCut 65 uses non-HF contact start with rapid arc restrike for consistent cutting on expanded metal, perforated plate, and interrupted cut paths. Parts-in-Place prevents arc initiation with improperly assembled consumables.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the FlexCut 65 compatible with a CNC plasma cutting table?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes. The FlexCut 65 has a built-in CPC port and automatic CNC table detection. The mechanized Ready-Pak (K5825-M) ships CNC-configured with a machine torch.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What air supply does the FlexCut 65 require?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The FlexCut 65 requires 80-120 PSI. A 60-gallon, 5+ HP compressor at 8-10 SCFM at 100 PSI suits sustained production cutting. Built-in air dryer handles standard shop moisture. Rotary screw compressor preferred for CNC table use.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n","brand":"Lincoln Electric","offers":[{"title":"FlexCut 65 Handheld Torch Ready-Pak","offer_id":46419346063511,"sku":"K5825-H","price":3699.99,"currency_code":"USD","in_stock":true},{"title":"FlexCut 65 Mechanized Torch Ready-Pak","offer_id":46419403997335,"sku":"K5825-M","price":3899.99,"currency_code":"USD","in_stock":true},{"title":"FlexCut 65 Power Source Only","offer_id":46419471368343,"sku":"K5825-PS","price":2899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/K5825_FlexCut-65_001.jpg?v=1765829799"},{"product_id":"lincoln-power-mig-140-mp-multi-process-welder-1","title":"Used Lincoln Power MIG 140 MP Multi-Process Welder","description":"\u003cdiv class=\"pdp-body\" data-template=\"template-a-mig\" data-batch=\"mig-batch-1\"\u003e\n\n\u003c!-- TLDR --\u003e\n\u003cdiv class=\"pdp-tldr\"\u003e\n\u003cp\u003e\u003cstrong\u003eLincoln Power MIG 140 MP Multi-Process Welder\u003c\/strong\u003e is built for multi-process welding (MIG, Flux-Cored, Stick, and TIG). Output ranges from 30-300A with a 40% @ 250A duty cycle. Runs on 208\/230\/460\/575V (single-phase) and feeds 0.025 - 3\/64 in (0.6 - 1.2 mm) wire. Ready for MIG, Flux-Cored.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c!-- Spec Table --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"pdp-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePower MIG 140 MP Multi-Process\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Code\u003c\/th\u003e\n\u003ctd\u003eK3520-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Amperage Range\u003c\/th\u003e\n\u003ctd\u003e30-300A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDuty Cycle\u003c\/th\u003e\n\u003ctd\u003e40% @ 250A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Voltage\u003c\/th\u003e\n\u003ctd\u003e208\/230\/460\/575V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePhase\u003c\/th\u003e\n\u003ctd\u003eSingle-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Diameter Range\u003c\/th\u003e\n\u003ctd\u003e0.025 - 3\/64 in (0.6 - 1.2 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWelding Processes\u003c\/th\u003e\n\u003ctd\u003eMIG, Flux-Cored\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e247 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003c!-- Downloads --\u003e\n\u003ch2\u003eDownloads \u0026amp; Documentation\u003c\/h2\u003e\n\u003cdiv class=\"pdp-downloads\"\u003e\n  \u003ca href=\"https:\/\/ch-delivery.lincolnelectric.com\/api\/public\/content\/36c2a1178b884ba3b0365128a348f4c0?v=aa7f4e17\" class=\"pdp-download-btn\" data-doc=\"spec-sheet\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e\n  \u003ca href=\"https:\/\/ch-delivery.lincolnelectric.com\/api\/public\/content\/2e647b75784244f1b6fa2a8152331c4a?v=bb23960c\" class=\"pdp-download-btn\" data-doc=\"owners-manual\" target=\"_blank\" rel=\"noopener\"\u003eOwner's Manual (PDF)\u003c\/a\u003e\n  \u003ca href=\"https:\/\/lincolnelectric.app.documoto.com\/ui\/book\/1056038\" class=\"pdp-download-btn\" data-doc=\"parts-list\" target=\"_blank\" rel=\"noopener\"\u003eParts List (PDF)\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMixed-process shops\u003c\/strong\u003e — switch between MIG, Stick, and TIG without owning a second machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMobile contractors\u003c\/strong\u003e — multi-voltage input runs on shop 230V or jobsite 120V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuto body and light fabrication\u003c\/strong\u003e — 0.025\" wire capability handles thin sheet metal cleanly\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- FAQ --\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat welding processes does the Power MIG 140 MP Multi-Process support?\u003c\/h3\u003e\n\u003cp\u003eIt supports MIG, Flux-Cored.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's the duty cycle on the Power MIG 140 MP Multi-Process?\u003c\/h3\u003e\n\u003cp\u003e40% @ 250A. This means continuous welding at that amperage for the listed percentage of a 10-minute cycle before requiring cool-down.\u003c\/p\u003e\n\n\u003ch3\u003eWhat input voltage does it require?\u003c\/h3\u003e\n\u003cp\u003e208\/230\/460\/575V on single-phase power.\u003c\/p\u003e\n\n\u003ch3\u003eWhat wire diameters can it feed?\u003c\/h3\u003e\n\u003cp\u003e0.025 - 3\/64 in (0.6 - 1.2 mm) — covers standard MIG wire sizes from sheet metal through medium structural work.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this come with a warranty?\u003c\/h3\u003e\n\u003cp\u003eAll new Lincoln Electric welders ship with the standard Lincoln 3-year warranty (parts and labor) on the power source. Consumables and contact tips are wear items not covered by warranty. Factory-demo units carry the Lincoln demo warranty — contact us for current terms.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Lincoln Electric","offers":[{"title":"Factory Reconditioned","offer_id":43639128129687,"sku":"U4498-1","price":699.0,"currency_code":"USD","in_stock":false},{"title":"TIG One-Pak - K4499-1","offer_id":43638685794455,"sku":"K4499-1","price":1679.99,"currency_code":"USD","in_stock":true},{"title":"Base Model - K4498-1","offer_id":45684277215383,"sku":"K4498-1","price":1179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/lincoln-electric-power-mig-140mp-factory-demo-multi-process-welder-u4498-1-lincoln-electric-1.png?v=1753377998"},{"product_id":"lincoln-power-mig-215-mpi-multi-process-welder","title":"Lincoln Power MIG 215 MPi Multi-Process Welder","description":"\u003cstyle\u003e\n.pdp-specs-table { width:100%; border-collapse:collapse; font-family:Arial,sans-serif; margin-bottom:16px; }\n.pdp-specs-table tr:nth-child(odd) { background:#f5f5f5; }\n.pdp-specs-table td { padding:10px 12px; border-bottom:1px solid #ddd; vertical-align:top; }\n.pdp-specs-table td:first-child { width:34%; font-weight:600; }\n.pdp-faq { margin-bottom:12px; }\n.pdp-faq strong { display:block; margin-bottom:4px; }\n.recon-crosslink { background:#fff8f0; border-left:4px solid #e07b00; padding:14px 18px; margin:24px 0; border-radius:3px; }\n\u003c\/style\u003e\n\n\u003ch2\u003eWhy Choose the Lincoln Power MIG 215 MPi?\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLincoln Power MIG 215 MPi (K4876-1)\u003c\/strong\u003e is Lincoln Electric's most versatile all-in-one multi-process welder — a 48-pound dual-voltage machine delivering 220 A on 230 V across MIG, Flux-Cored, Stick, and DC TIG processes from a single compact unit. For welding shops, fabricators, contractors, and advanced DIY operators who need one machine that handles everything from 120 V light shop repairs to 230 V production MIG and heavy Stick welding, the 215 MPi is Lincoln's flagship entry-level professional multi-process welder.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFour processes, one machine: MIG, Flux-Cored, Stick, and DC TIG.\u003c\/strong\u003e The Power MIG 215 MPi switches between constant-voltage (CV) MIG and Flux-Cored wire welding and constant-current (CC) Stick and DC TIG without adapter changes, separate machines, or purchasing add-on capability packs. A structural fabricator can MIG weld 3\/16\" mild steel with ER70S-6 wire at full 215 A on 230 V in the morning and run E7018 Stick repair passes on carbon steel equipment bases at 150 A in the afternoon — same machine, same power connection. Per the \u003ca href=\"https:\/\/pdiimages.praxair.com\/PDIB2CImages\/product-pdf\/LIN_e770.pdf\"\u003eLincoln Electric Power MIG 215 MPi specification sheet\u003c\/a\u003e, processes include MIG (GMAW), Flux-Cored self-shielded (FCAW-S), Flux-Cored gas-shielded (FCAW-G), Stick (SMAW), and DC TIG (GTAW).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e215 A on 230 V — welds up to 1\/2\" mild steel MIG, 5\/32\" Stick.\u003c\/strong\u003e At full 230 V capacity, the 215 MPi delivers 215 A \/ 24.8 V \/ 30% duty cycle for MIG welding, with an output range up to 220 A. This covers 1\/8\"–3\/8\" mild and stainless steel MIG wire welding and 1\/8\"–5\/32\" Stick electrode work. In Stick mode on 230 V, rated output is 175 A \/ 27 V \/ 30%, with 110 A \/ 24.4 V \/ 100% continuous — sufficient for sustained E7018 work on structural and equipment repair applications.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual voltage 120 V \/ 230 V — runs on a household outlet.\u003c\/strong\u003e The 215 MPi's dual-voltage input means it plugs into any standard 120 V 20-amp household or shop circuit for light MIG (up to 140 A) and Stick (up to 140 A) work, then runs at full 215–220 A capacity on 230 V for production-level welding. Per the \u003ca href=\"https:\/\/www.weldingstore.com\/products\/lincoln-power-mig-r-215-mpi-multi-process-welder-k4876-1\"\u003ePower MIG 215 MPi detailed spec listing\u003c\/a\u003e, 120 V input delivers MIG 105 A \/ 19.3 V \/ 40% and Stick 85 A \/ 23.4 V \/ 40% at rated output — practical for light repair work and hobby projects on any available circuit.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReady.Set.Weld technology and ArcFX display for beginner-friendly operation.\u003c\/strong\u003e The 215 MPi features Lincoln's Ready.Set.Weld setup system, which recommends wire feed speed and voltage settings based on material type and thickness entered by the operator. The ArcFX display shows weld parameter recommendations in real time, reducing trial-and-error setup time for operators unfamiliar with MIG welding process parameters. For shops onboarding new welders or hobbyist operators who don't weld frequently enough to memorize settings by feel, this interface shortens the learning curve significantly while still allowing full manual parameter control for experienced users.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"recon-crosslink\"\u003e\n  \u003cstrong\u003eConsidering a Demo unit?\u003c\/strong\u003e See \u003ca href=\"https:\/\/weldingmart.com\/collections\/demo-stick-welders\"\u003eFactory Demo Stick Welders\u003c\/a\u003e — restocked frequently.\n\u003c\/div\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"pdp-specs-table\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU \/ Model\u003c\/td\u003e\n\u003ctd\u003eK4876-1 \/ Power MIG 215 MPi (base model)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProcesses\u003c\/td\u003e\n\u003ctd\u003eMIG (GMAW), Flux-Cored (FCAW-S \/ FCAW-G), DC Stick (SMAW), DC TIG (GTAW)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAC\/DC Capability\u003c\/td\u003e\n\u003ctd\u003eDC only (CC\/CV inverter)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e120 V or 230 V, 1-Phase, 60 Hz (switch-selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Current (effective \/ max)\u003c\/td\u003e\n\u003ctd\u003e120 V: 15 A eff \/ 22 A max  |  230 V: 15.9 A eff \/ 29 A max\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output — MIG 120 V\u003c\/td\u003e\n\u003ctd\u003e105 A \/ 19.3 V \/ 40% duty cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output — MIG 230 V\u003c\/td\u003e\n\u003ctd\u003e215 A \/ 24.8 V \/ 30% duty cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output — Stick 120 V\u003c\/td\u003e\n\u003ctd\u003e85 A \/ 23.4 V \/ 40% duty cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output — Stick 230 V\u003c\/td\u003e\n\u003ctd\u003e175 A \/ 27 V \/ 30% duty cycle  |  110 A \/ 24.4 V \/ 100%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output — TIG 120 V\u003c\/td\u003e\n\u003ctd\u003e130 A \/ 15.2 V \/ 40% duty cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output — TIG 230 V\u003c\/td\u003e\n\u003ctd\u003e175 A \/ 17 V \/ 30% duty cycle  |  110 A \/ 14.4 V \/ 100%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput Range — 120 V\u003c\/td\u003e\n\u003ctd\u003e20–140 A DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput Range — 230 V\u003c\/td\u003e\n\u003ctd\u003e20–220 A DC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Open Circuit Voltage\u003c\/td\u003e\n\u003ctd\u003e56 V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eDC (DCEP \/ DCEN selectable for different processes)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWire Feed Speed\u003c\/td\u003e\n\u003ctd\u003e50–500 ipm (1.3–12.7 m\/min)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWire Diameter Range\u003c\/td\u003e\n\u003ctd\u003e0.025–0.045 in (0.6–1.1 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIEC Rating\u003c\/td\u003e\n\u003ctd\u003eIP21S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e48 lbs (21.8 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions (H×W×D)\u003c\/td\u003e\n\u003ctd\u003e15.08\" × 10.88\" × 23.14\" (383 × 276 × 588 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Years (Lincoln Electric factory)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew — Lincoln Electric K-prefix (factory-new)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eSource: \u003ca href=\"https:\/\/pdiimages.praxair.com\/PDIB2CImages\/product-pdf\/LIN_e770.pdf\"\u003eLincoln Electric Power MIG 215 MPi Specification Sheet\u003c\/a\u003e | \u003ca href=\"https:\/\/www.weldingstore.com\/products\/lincoln-power-mig-r-215-mpi-multi-process-welder-k4876-1\"\u003ePower MIG 215 MPi detailed specifications\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePower MIG 215 MPi Power Source (K4876-1)\u003c\/li\u003e\n  \u003cli\u003eMIG welding gun — Magnum PRO 175L, 10 ft\u003c\/li\u003e\n  \u003cli\u003eWork clamp with cable — 10 ft\u003c\/li\u003e\n  \u003cli\u003eSample MIG wire spool — ER70S-6 (0.030 in)\u003c\/li\u003e\n  \u003cli\u003eInput power cord (230 V)\u003c\/li\u003e\n  \u003cli\u003e120 V adapter (included for dual-voltage use on household circuits)\u003c\/li\u003e\n  \u003cli\u003eDrive roll — 0.030 \/ 0.035 in (pre-installed)\u003c\/li\u003e\n  \u003cli\u003eOperator's manual\u003c\/li\u003e\n  \u003cli\u003e\u003cem\u003eNote: Stick electrode holder \/ Stick lead assembly, TIG torch, and gas regulator are not included in the base K4876-1. For TIG-ready packages, see K4878-1 (TIG One-Pak). Flux-cored wire, shielding gas, and regulator for gas-shielded MIG are sold separately.\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Accessories\u003c\/h2\u003e\n\u003cp\u003eThe Power MIG 215 MPi's multi-process capability spans MIG, Stick, and TIG accessory ecosystems — all available through WeldingMart:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/stick-welding-electrodes-rods\"\u003e\u003cstrong\u003eStick Electrodes\u003c\/strong\u003e\u003c\/a\u003e — The 215 MPi's CC Stick mode supports a full range of SMAW electrodes. E7018 H4R in 1\/8\" and 5\/32\" for structural mild steel and low-alloy weldments at 120–175 A on 230 V. E6010 and E6011 for root passes on pipe and open-root structural joints in the higher penetration CC mode. E7014 and E6013 for light-duty repair and sheet metal work in the machine's lower amperage ranges. The 215 MPi's 20–175 A Stick range handles everything from 3\/32\" rods at 20–50 A to 5\/32\" production rods at full output.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/stick-accessories\"\u003e\u003cstrong\u003eStick Welding Accessories\u003c\/strong\u003e\u003c\/a\u003e — Electrode holders (300 A K5156-1, T300 K909-6), work clamps, chipping hammers, wire brushes for slag removal between passes, and portable rod ovens (Lincoln HydroGuard K2939-2) for low-hydrogen E7018 conditioning on structural and pressure-vessel code work. The Lincoln K2394-1 Electrode Holder \u0026amp; Cable Assembly is a turnkey Stick lead solution for the 215 MPi when used in Stick mode.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/welding-electrode-holders\"\u003e\u003cstrong\u003eElectrode Holders \u0026amp; Stingers\u003c\/strong\u003e\u003c\/a\u003e — The 215 MPi's 175 A maximum Stick output pairs well with 300 A electrode holders for sustained production runs. Lincoln's T300 Electrode Holder (K909-6, DC only) provides the jaw quality and handle insulation required for professional structural and pipe repair work where long stick time and reliable electrode contact are priorities.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/welding-cables\"\u003e\u003cstrong\u003eWelding Cables \u0026amp; Leads\u003c\/strong\u003e\u003c\/a\u003e — 2\/0 AWG lead extensions for reaching structural connections, equipment pads, and pipe joints farther than the included 10-ft work cable. Dinse-to-Tweco adapters for shops with mixed connector infrastructure. Full-length 25-ft and 50-ft replacement electrode leads for Stick welding applications where the machine must stay in one location and the welder works at a distance.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/stick-accessories\"\u003e\u003cstrong\u003eRod Ovens \u0026amp; Electrode Storage\u003c\/strong\u003e\u003c\/a\u003e — Lincoln HydroGuard bench oven (K2942-2) for permanent low-hydrogen electrode conditioning storage. For mobile operations using the 215 MPi's Stick capability at field locations, the portable K2939-2 portable oven maintains E7018 compliance through the workday without returning rods to a permanent bench oven between uses.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eStick Welding Applications\u003c\/h2\u003e\n\u003cp\u003eWhile the Power MIG 215 MPi's primary use case is MIG and Flux-Cored welding, its 175 A DC Stick capability makes it a genuinely capable SMAW machine for five core application verticals:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStructural steel — fabrication shops and field connection repair.\u003c\/strong\u003e Fabrication shops with a single 215 MPi can switch from production MIG welding mild steel structural members to Stick repair and fitup work on weld joints that are difficult to access with a MIG gun — inside corners, back-of-joint welds, and overhead positions where electrode control is simpler than wire feed. The 175 A \/ 30% duty cycle on 230 V handles 1\/8\" and 5\/32\" E7018 for structural fillet welds on shapes up to 3\/8\" plate thickness.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipeline and piping repair — light-duty maintenance.\u003c\/strong\u003e Maintenance welders at industrial facilities who primarily use MIG welding for day-to-day repairs but occasionally need to Stick weld carbon steel pipe flanges, supports, and connections at locations too tight for a MIG gun benefit from the 215 MPi's Stick mode. E6010 at 80–130 A in CC mode provides adequate penetration for pipe repair and structural connection work. For dedicated pipeline production welding, the Lincoln Invertec V276 provides the duty cycle and amperage capacity required — the 215 MPi is suited to intermittent pipe repair rather than continuous pipeline production.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAgricultural equipment repair — versatile field use.\u003c\/strong\u003e The 215 MPi's dual-voltage input (120 V \/ 230 V) and 48-lb portability make it a practical all-around shop machine for farms and agricultural operations that need one welder for everything from sheet metal MIG tack work to Stick repair of heavy implement frames. On 120 V generator or barn circuit, the 85 A Stick output handles 3\/32\" E6011 for rust and dirty-metal field repair. On 230 V, 175 A covers 5\/32\" structural rods for equipment frame and loader bucket repair at full amperage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRepair and maintenance — multi-process capability in one machine.\u003c\/strong\u003e A plant maintenance team with one 215 MPi can MIG weld ductwork, conveyor guards, and sheet metal enclosures; Flux-Cored weld carbon steel structure in outdoor environments without shielding gas; Stick weld pipe flanges and thick-section equipment in tight locations; and DC TIG weld stainless instrumentation connections — without transporting four separate machines or purchasing multi-process add-on kits. The single-machine multi-process capability is the core value proposition for maintenance and repair operations with limited floor space and equipment budget.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFabrication — light structural and general shop.\u003c\/strong\u003e Fabrication shops producing gates, ornamental metalwork, trailer components, machine frames, and custom steel assemblies use the 215 MPi as a one-machine shop solution. MIG handles production flat and horizontal welds on mild steel; Stick handles vertical-up and overhead positions on thicker material where electrode control is simpler than manipulating a wire gun; TIG handles stainless trim pieces and precision alloy fabrication when included in a customer order. The 215 MPi covers all three without requiring separate CC and CV power sources.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What is the amperage range of the Power MIG 215 MPi for Stick welding?\u003c\/strong\u003e\n  \u003cp\u003eIn Stick mode, the 215 MPi delivers 20–140 A DC on 120 V and 20–175 A DC on 230 V. Rated Stick output on 230 V is 175 A \/ 27 V \/ 30% duty cycle at maximum, and 110 A \/ 24.4 V \/ 100% continuous. This covers electrodes from 3\/32\" at 20–60 A to 5\/32\" at 140–175 A, per the \u003ca href=\"https:\/\/pdiimages.praxair.com\/PDIB2CImages\/product-pdf\/LIN_e770.pdf\"\u003eLincoln Electric Power MIG 215 MPi spec sheet\u003c\/a\u003e. For production Stick welding above 175 A or with higher duty cycle requirements, the Invertec V276 provides the appropriate capacity.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Is the Power MIG 215 MPi AC or DC?\u003c\/strong\u003e\n  \u003cp\u003eThe Power MIG 215 MPi is DC-only across all processes: DC MIG (GMAW), DC Flux-Cored (FCAW), DC Stick (SMAW), and DC TIG (GTAW). It cannot produce AC output. The DC-only design means it cannot TIG weld aluminum, which requires AC output. For all steel, stainless, and low-alloy applications in MIG, Stick, and TIG, DC is the standard and correct polarity — the 215 MPi's DC output is optimal for all of these material types.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What is the Power MIG 215 MPi's duty cycle?\u003c\/strong\u003e\n  \u003cp\u003eAt maximum MIG output on 230 V (215 A), the 215 MPi is rated at 30% duty cycle — 3 minutes of arcing per 10-minute cycle at peak output. At lower MIG outputs typical of production work (120–160 A), duty cycle improves substantially. In Stick mode on 230 V, rated duty cycle is 30% at 175 A and 100% at 110 A. On 120 V, rated MIG and Stick duty cycle is 40% at rated output. For sustained production MIG at 200+ A, operating at 50–70% of maximum output (130–150 A) significantly extends thermal headroom.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What is the best electrode for Stick welding with the Power MIG 215 MPi?\u003c\/strong\u003e\n  \u003cp\u003eFor general structural and equipment repair work on mild steel, E7018 H4R in 1\/8\" and 5\/32\" diameters at 120–175 A on 230 V is the industry standard low-hydrogen choice. For root passes on carbon steel pipe and welding through rust and mill scale, E6010 or E6011 at 80–130 A provides the deep-penetrating, fast-freezing arc needed for open-root joints. E6013 in 3\/32\" and 1\/8\" works well for light-duty repair on thinner material at lower amperage settings. The 215 MPi's CC Stick mode maintains a stable arc across all of these electrode types and sizes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Is the Power MIG 215 MPi portable enough for site work?\u003c\/strong\u003e\n  \u003cp\u003eYes — at 48 lbs (21.8 kg) and 15.08\" × 10.88\" × 23.14\", the 215 MPi is compact enough to load in a work truck or van and carry to a job site. The dual-voltage input (120 V \/ 230 V) is particularly valuable for site portability — on 120 V, the machine connects to any standard 20-amp circuit at a site without requiring a dedicated 230 V power run, covering MIG up to 140 A and Stick up to 140 A for most repair and light fabrication work. For heavy outdoor Stick production above 175 A with weather-rated protection, the Invertec V276 (IP23) provides the appropriate outdoor-rated specification.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the amperage range of the Power MIG 215 MPi for Stick welding?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"In Stick mode, the 215 MPi delivers 20-140 A DC on 120 V and 20-175 A DC on 230 V. Rated Stick output on 230 V is 175 A at 30% duty cycle at maximum, and 110 A at 100% continuous. This covers electrodes from 3\/32\\\" at 20-60 A to 5\/32\\\" at 140-175 A.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the Power MIG 215 MPi AC or DC?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The Power MIG 215 MPi is DC-only across all processes: DC MIG, DC Flux-Cored, DC Stick, and DC TIG. It cannot produce AC output and cannot TIG weld aluminum.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the Power MIG 215 MPi's duty cycle?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"At maximum MIG output on 230 V (215 A), duty cycle is 30%. In Stick mode on 230 V, rated duty cycle is 30% at 175 A and 100% at 110 A. On 120 V, rated MIG and Stick duty cycle is 40% at rated output.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the best electrode for Stick welding with the Power MIG 215 MPi?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"For general structural work, E7018 H4R in 1\/8\\\" and 5\/32\\\" at 120-175 A on 230 V. For root passes on pipe and welding through rust, E6010 or E6011 at 80-130 A. E6013 in 3\/32\\\" and 1\/8\\\" for light-duty repair at lower amperage.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the Power MIG 215 MPi portable enough for site work?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes -- at 48 lbs and 15.08\\\" x 10.88\\\" x 23.14\\\", the 215 MPi is compact enough to load in a work truck. The dual-voltage input (120 V\/230 V) is particularly valuable for site portability -- on 120 V it connects to any standard 20-amp circuit for MIG and Stick up to 140 A without a dedicated 230 V power run.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n","brand":"Lincoln Electric","offers":[{"title":"Base Model - K4876-1","offer_id":43639681613975,"sku":"K4876-1","price":2249.0,"currency_code":"USD","in_stock":true},{"title":"Aluminum One-Pak - K4877-1","offer_id":43639681286295,"sku":"K4877-1","price":2699.0,"currency_code":"USD","in_stock":true},{"title":"TIG One-Pak - K4878-1","offer_id":43639681319063,"sku":"K4878-1","price":3369.0,"currency_code":"USD","in_stock":true},{"title":"Factory Demo","offer_id":43639688495255,"sku":"U4876-1","price":1949.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/u4876-1_3.png?v=1755131371"},{"product_id":"lincoln-sprinter-180si-stick-pulsed-tig-welder","title":"Lincoln Sprinter 180Si Stick\/ Pulsed TIG Welder","description":"\u003cstyle\u003e\n.pdp-specs-table { width:100%; border-collapse:collapse; font-family:Arial,sans-serif; margin-bottom:16px; }\n.pdp-specs-table tr:nth-child(odd) { background:#f5f5f5; }\n.pdp-specs-table td { padding:10px 12px; border-bottom:1px solid #ddd; vertical-align:top; }\n.pdp-specs-table td:first-child { width:34%; font-weight:600; }\n.pdp-faq { margin-bottom:12px; }\n.pdp-faq strong { display:block; margin-bottom:4px; }\n.recon-crosslink { background:#fff8f0; border-left:4px solid #e07b00; padding:14px 18px; margin:24px 0; border-radius:3px; }\n\u003c\/style\u003e\n\n\u003ch2\u003eWhy Choose the Lincoln Sprinter 180Si?\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eLincoln Sprinter 180Si (K5453-1)\u003c\/strong\u003e is Lincoln Electric's most capable portable Stick and DC TIG welder under 20 pounds — a dual-voltage inverter machine that runs on 120 V or 230 V and delivers 180 A Stick output and 200 A DC TIG in an 11.8\" × 6.25\" × 16\" package weighing just 19.5 lbs. For maintenance welders, pipeline contractors, agricultural operations, and field fabricators who need a machine that goes where the work is, the Sprinter 180Si is Lincoln's premium answer.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnder 20 lbs — carry it anywhere.\u003c\/strong\u003e At 19.5 lbs (8.85 kg), the Sprinter 180Si fits in a tool bag, straps over your shoulder with the included carry strap, and can be taken up a ladder, into a crawl space, or across a field to the equipment that needs repair. The compact 11.8\" × 6.25\" × 16\" footprint fits in a service truck without consuming a full shelf. According to \u003ca href=\"https:\/\/www.lincolnelectric.com\/en-us\/equipment\/welding-machines\/stick-smaw\/sprinter-180si\"\u003eLincoln Electric's Sprinter 180Si product page\u003c\/a\u003e, this is designed to be the go-to portable professional Stick machine.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTwo dedicated Stick modes: Crisp Arc and Soft Arc.\u003c\/strong\u003e The Sprinter 180Si separates itself from commodity portable welders with two distinct Stick modes. Crisp Arc (6010\/6011 mode) delivers the sharp, fast-freezing arc required for cellulosic electrode performance on root passes and vertical-up structural welds. Soft Arc mode provides the forgiving, deep-penetration arc suited to E7018 low-hydrogen electrodes for structural and pressure-vessel work. Most compact portable Stick welders offer neither — the Sprinter 180Si offers both.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e180 A Stick on 230 V — up to 5\/32\" electrodes.\u003c\/strong\u003e The full 20–180 A Stick output range on 230 V covers everything from light sheet metal tack work at 20–50 A up to 5\/32\" E7018 and E6010 production runs at 160–180 A. On 120 V, the machine delivers 10–85 A for electrode sizes up to 3\/32\", usable for light-duty field repairs on a standard 20-amp household or generator circuit. Per the \u003ca href=\"https:\/\/pdiimages.praxair.com\/PDIB2CImages\/product-pdf\/LIN_e2203.pdf\"\u003eLincoln Electric Sprinter 180Si specification sheet\u003c\/a\u003e, rated Stick output is 180 A \/ 26.4 V \/ 25% duty cycle at 230 V, and 85 A \/ 23.2 V \/ 40% duty cycle at 120 V.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-Frequency TIG start, Lift-Arc TIG, and Pulsed TIG — all built in.\u003c\/strong\u003e The Sprinter 180Si is more than a Stick machine. It includes HF TIG start for touchless, contamination-free tungsten ignition; Lift-Arc start for HF-free environments; and Pulsed TIG with pulse rate adjustable from 0.1 to 100 pulses per second (PPS) with automatic 50% on-time and 50% background-current regulation. Pulsed TIG on a 20-lb portable machine capable of 200 A is a specification point that industrial-grade TIG machines in the $2,000–$3,000 range typically provide. Foot Amptrol and remote amperage control are supported via the 8-pin Amphenol connector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"recon-crosslink\"\u003e\n  \u003cstrong\u003eConsidering a Demo unit?\u003c\/strong\u003e See \u003ca href=\"https:\/\/weldingmart.com\/collections\/demo-stick-welders\"\u003eFactory Demo Stick Welders\u003c\/a\u003e for triple savings — restocked frequently.\n\u003c\/div\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"pdp-specs-table\"\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSKU \/ Model\u003c\/td\u003e\n\u003ctd\u003eK5453-1 \/ Sprinter 180Si (base model)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProcesses\u003c\/td\u003e\n\u003ctd\u003eDC Stick (SMAW), DC TIG (GTAW), Pulsed DC TIG\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAC\/DC Capability\u003c\/td\u003e\n\u003ctd\u003eDC only (not AC TIG — cannot weld aluminum)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e120 V or 230 V, 1-Phase, 60 Hz (switch-selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Current (max)\u003c\/td\u003e\n\u003ctd\u003e120 V: 22 A  |  230 V: 30 A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output — Stick 120 V\u003c\/td\u003e\n\u003ctd\u003e85 A \/ 23.2 V \/ 40% duty cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output — Stick 230 V\u003c\/td\u003e\n\u003ctd\u003e180 A \/ 26.4 V \/ 25% duty cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output — TIG 120 V\u003c\/td\u003e\n\u003ctd\u003e110 A \/ 14.6 V \/ 40% duty cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRated Output — TIG 230 V\u003c\/td\u003e\n\u003ctd\u003e200 A \/ 16.4 V \/ 25% duty cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput Range — Stick\u003c\/td\u003e\n\u003ctd\u003e10–85 A (120 V)  |  20–180 A (230 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput Range — TIG\u003c\/td\u003e\n\u003ctd\u003e10–110 A (120 V)  |  10–200 A (230 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Open Circuit Voltage\u003c\/td\u003e\n\u003ctd\u003e65 V average, 110 V peak; VRD OCV (peak) 14 V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003eDC only (DCEP for Stick, DCEN for TIG)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eArc Start — Stick\u003c\/td\u003e\n\u003ctd\u003eHot Start with arc force\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eArc Start — TIG\u003c\/td\u003e\n\u003ctd\u003eHigh-Frequency (HF) Start \u0026amp; Lift-Arc Start\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStick Modes\u003c\/td\u003e\n\u003ctd\u003eCrisp Arc (6010\/6011 cellulosic) \u0026amp; Soft Arc (7018 low-hydrogen)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePulsed TIG\u003c\/td\u003e\n\u003ctd\u003eYes — 0.1 to 100 PPS, 50% on-time, background = 50% of peak\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRemote Control Connector\u003c\/td\u003e\n\u003ctd\u003e8-pin Amphenol (foot Amptrol \/ torch amptrol compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWork Lead Connector\u003c\/td\u003e\n\u003ctd\u003eDinse-style\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIEC Rating\u003c\/td\u003e\n\u003ctd\u003eIP21S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMax Electrode Diameter\u003c\/td\u003e\n\u003ctd\u003e5\/32 in (4.0 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e19.5 lbs (8.85 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions (H×W×D)\u003c\/td\u003e\n\u003ctd\u003e11.8\" × 6.25\" × 16\" (299.7 × 158.8 × 406.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e3 Years (Lincoln Electric factory)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew — Lincoln Electric K-prefix (factory-new)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eSource: \u003ca href=\"https:\/\/pdiimages.praxair.com\/PDIB2CImages\/product-pdf\/LIN_e2203.pdf\"\u003eLincoln Electric Sprinter 180Si Specification Sheet\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSprinter 180Si Power Source (K5453-1)\u003c\/li\u003e\n  \u003cli\u003eElectrode holder \/ stinger with cable — 12.5 ft\u003c\/li\u003e\n  \u003cli\u003eWork clamp with cable — 12.5 ft\u003c\/li\u003e\n  \u003cli\u003eInput power cord with 120 V adapter plug\u003c\/li\u003e\n  \u003cli\u003eShoulder carry strap\u003c\/li\u003e\n  \u003cli\u003eOperator's manual\u003c\/li\u003e\n  \u003cli\u003e\u003cem\u003eNote: Base model K5453-1 does not include a TIG torch. For TIG-ready packages, see K5585-2 (Foot Pedal TIG One-Pak \u0026amp; Case) or K5953-2 (Hand Amptrol TIG One-Pak \u0026amp; Case).\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCompatible Accessories\u003c\/h2\u003e\n\u003cp\u003eThe Sprinter 180Si's 8-pin Amphenol remote connector and standard Dinse work connections make it compatible with the full Lincoln stick and TIG accessory ecosystem:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/stick-welding-electrodes-rods\"\u003e\u003cstrong\u003eStick Electrodes\u003c\/strong\u003e\u003c\/a\u003e — E6010 and E6011 cellulosic rods for deep-penetration root passes in Crisp Arc mode; E7018 low-hydrogen for structural, pressure vessel, and pipe fill\/cap passes; E6013 for light-duty repair and thin material; E308L-16 and E309L-16 for stainless steel; E7016 for out-of-position structural work. The Sprinter's 180 A Stick output handles everything from 1\/16\" electrodes on light-gauge work to 5\/32\" production rods at full output.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/stick-accessories\"\u003e\u003cstrong\u003eStick Welding Accessories\u003c\/strong\u003e\u003c\/a\u003e — Electrode holders (300 A and 400 A), work clamps, chipping hammers, wire brushes, rod ovens for low-hydrogen electrode storage (essential for E7018 on code-quality structural and pressure-vessel work), and the Lincoln K2394-1 Electrode Holder \u0026amp; Cable Assembly. The Sprinter is compact enough to pair with a lightweight kit that fits in the same bag as the machine.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/welding-electrode-holders\"\u003e\u003cstrong\u003eElectrode Holders \u0026amp; Stingers\u003c\/strong\u003e\u003c\/a\u003e — Lincoln Industrial 300 A Electrode Holder (K5156-1) and T300 Electrode Holder (K909-6) for sustained production Stick welding. Upgrade to a 400 A holder when running heavy 5\/32\" E7018 passes on structural sections for improved heat dissipation and jaw life.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/welding-cables\"\u003e\u003cstrong\u003eWelding Cables \u0026amp; Leads\u003c\/strong\u003e\u003c\/a\u003e — 2\/0 and 1\/0 AWG welding cable assemblies for extending electrode or work lead reach on field jobs. Dinse-to-Tweco adapters for shops with legacy connector setups. Full-length 50-ft lead extensions for pipeline and structural ironwork where the machine stays at one level and the work runs below or away from it.\u003c\/li\u003e\n  \u003cli\u003e\n\u003ca href=\"https:\/\/weldingmart.com\/collections\/stick-accessories\"\u003e\u003cstrong\u003eRod Ovens \u0026amp; Electrode Storage\u003c\/strong\u003e\u003c\/a\u003e — Lincoln HydroGuard portable electrode oven (K2939-2, 230 V) and bench oven (K2942-2) for maintaining E7018 and other low-hydrogen electrodes at manufacturer-recommended holding temperatures. Critical for AWS D1.1 structural and ASME Section IX pressure-vessel code work where moisture in low-hydrogen coatings causes porosity and hydrogen cracking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eStick Welding Applications\u003c\/h2\u003e\n\u003cp\u003eThe Sprinter 180Si's 19.5-lb portability, dual voltage, 180 A Stick output, and dedicated 6010 Crisp Arc mode make it a serious professional machine for five core Stick welding application verticals:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStructural steel — ironwork, beam connections, and column splices.\u003c\/strong\u003e The Sprinter 180Si's 180 A Soft Arc mode supports E7018 H4R structural electrodes for fillet welds and full-penetration groove welds on structural shapes up to 5\/16\" plate. On 230 V generator power at a structural ironwork site, the machine runs 5\/32\" E7018 at 145–170 A for continuous fillet weld production. The compact size means ironworkers can carry it aloft to beam connections rather than trailing long leads from a ground-level machine.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePipeline and pressure piping — root passes with E6010.\u003c\/strong\u003e Pipeline welders using the \u003ca href=\"https:\/\/pdiimages.praxair.com\/PDIB2CImages\/product-pdf\/LIN_e2203.pdf\"\u003eSprinter 180Si's Crisp Arc mode\u003c\/a\u003e can burn E6010 3\/32\" and 1\/8\" root passes on 2\"–6\" schedule 40 and schedule 80 carbon-steel pipe at 65–120 A with the tight, fast-freezing arc required for keyhole-pass open-root technique. The machine's 120 V capability also means it runs on a standard 20-amp branch circuit for small-diameter piping repairs in plant maintenance environments without requiring a dedicated 230 V drop.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAgricultural and farm equipment repair.\u003c\/strong\u003e Farm maintenance welders depend on a machine that starts without hesitation in cold weather, runs on a generator or barn circuit, handles heavily rusted base metal, and doesn't require specialized knowledge. The Sprinter 180Si delivers all four. E6011 AC\/DC rods in the Crisp Arc mode burn through rust, mill scale, and dirty base metal on implement frames, loader buckets, disc blades, and grain auger shafts. The 20-lb weight and included shoulder strap make it easy to carry to wherever the broken equipment sits.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRepair and maintenance — plant and field service.\u003c\/strong\u003e Maintenance welders who need to repair carbon steel pipe flanges, structural supports, conveyor frames, and equipment bases in plants, refineries, and manufacturing facilities benefit from the Sprinter 180Si's full 20–180 A Stick range and dual voltage. The machine covers delicate thin-section repair welds at low amperage and production-pace structural repairs at high amperage with the same machine, the same electrodes, and no reconfiguration beyond switching modes and adjusting amperage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFabrication — light structural and precision assemblies.\u003c\/strong\u003e Fabricators who weld steel frames, brackets, gates, trailers, and custom metalwork with carbon-steel and low-alloy electrodes find the Sprinter's Soft Arc mode and 20–180 A range sufficient for everything from 18-gauge sheet tacking to 1\/4\" structural fillet welds at full output. The Pulsed TIG capability extends the machine's utility to stainless and alloy fabrication for customers who also TIG weld 16-gauge stainless table tops, instrumentation stands, or aluminum-free alloy brackets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What is the amperage range on the Lincoln Sprinter 180Si?\u003c\/strong\u003e\n  \u003cp\u003eThe Sprinter 180Si delivers 10–85 A Stick and 10–110 A TIG on 120 V, and 20–180 A Stick and 10–200 A TIG on 230 V. The maximum output is 180 A Stick at 230 V (25% duty cycle) — sufficient for 5\/32\" E7018 and E6010 electrodes. On 120 V, the 85 A Stick maximum covers electrodes up to 3\/32\" for light-duty field repairs and maintenance work. Per the \u003ca href=\"https:\/\/pdiimages.praxair.com\/PDIB2CImages\/product-pdf\/LIN_e2203.pdf\"\u003eLincoln Electric Sprinter 180Si spec sheet\u003c\/a\u003e, rated TIG output is 200 A at 25% duty cycle on 230 V.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Is the Sprinter 180Si AC or DC?\u003c\/strong\u003e\n  \u003cp\u003eThe Sprinter 180Si is DC-only — it cannot produce AC output. DC Stick welding delivers a more stable arc and is preferred for E7018, E6010, and low-hydrogen electrode types. The DC-only design also means the Sprinter cannot TIG weld aluminum, which requires AC output. For AC\/DC TIG on aluminum or AC Stick welding applications, see Lincoln's Square Wave TIG or Invertec AC\/DC product lines. For field Stick welding on mild steel, carbon steel pipe, and structural applications, the Sprinter's DC output is the appropriate choice.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What is the Sprinter 180Si's duty cycle?\u003c\/strong\u003e\n  \u003cp\u003eOn 230 V, the Sprinter 180Si is rated 180 A \/ 25% duty cycle for Stick and 200 A \/ 25% duty cycle for TIG at maximum output. At lower output — the more typical field operating range — duty cycle improves significantly. On 120 V, the machine is rated 85 A Stick \/ 40% duty cycle and 110 A TIG \/ 40% duty cycle. For most fieldwork and maintenance applications where arcing time is naturally interrupted (repositioning, rod changes, slag removal), the 25–40% duty cycle at rated output is workable. For sustained production Stick welding on longer structural welds, operating at 130–150 A rather than maximum output extends thermal headroom.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: What is the best electrode for the Sprinter 180Si?\u003c\/strong\u003e\n  \u003cp\u003eFor structural and general fabrication on mild steel, E7018 H4R is the industry-standard low-hydrogen electrode — run in Soft Arc mode at 120–160 A on 230 V for 5\/32\" rods. For root passes on carbon-steel pipe and for welding through rust, mill scale, and dirty base metal, E6010 (or E6011 on 120 V or generator power) is the correct choice — run in the Sprinter's dedicated Crisp Arc mode at 80–130 A depending on rod diameter and position. E6013 works well for sheet metal, hobby projects, and light-duty repair where deep penetration is not required. For stainless steel, E308L-16 and E309L-16 provide the austenitic chemistry required for 304 and 316 stainless base metals.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp-faq\"\u003e\n  \u003cstrong\u003eQ: Is the Lincoln Sprinter 180Si portable enough for site work?\u003c\/strong\u003e\n  \u003cp\u003eYes — the Sprinter 180Si is specifically engineered for site portability. At 19.5 lbs with an included shoulder carry strap, it is one of the lightest professional Stick welders with 180 A output on the market. The machine fits in a standard tool bag or backpack alongside electrodes, leads, and personal protective equipment. On 120 V, it runs off any 20-amp generator outlet or household circuit without a dedicated 230 V power drop — making it deployable to construction sites, farm fields, plant maintenance areas, and remote structural work where 230 V is unavailable or inconvenient to run.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the amperage range on the Lincoln Sprinter 180Si?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The Sprinter 180Si delivers 10-85 A Stick and 10-110 A TIG on 120 V, and 20-180 A Stick and 10-200 A TIG on 230 V. The maximum output is 180 A Stick at 230 V (25% duty cycle) -- sufficient for 5\/32\\\" E7018 and E6010 electrodes. On 120 V, the 85 A Stick maximum covers electrodes up to 3\/32\\\" for light-duty field repairs.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the Sprinter 180Si AC or DC?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"The Sprinter 180Si is DC-only -- it cannot produce AC output. DC Stick welding delivers a more stable arc and is preferred for E7018, E6010, and low-hydrogen electrode types. The machine cannot TIG weld aluminum, which requires AC output.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the Sprinter 180Si's duty cycle?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"On 230 V, the Sprinter 180Si is rated 180 A \/ 25% duty cycle for Stick and 200 A \/ 25% duty cycle for TIG at maximum output. On 120 V, the machine is rated 85 A Stick \/ 40% duty cycle and 110 A TIG \/ 40% duty cycle.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the best electrode for the Sprinter 180Si?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"For structural and general fabrication on mild steel, E7018 H4R run in Soft Arc mode at 120-160 A. For root passes on carbon-steel pipe and welding through rust or mill scale, E6010 (or E6011 on 120 V) in Crisp Arc mode at 80-130 A. E6013 for light-duty sheet metal and repair work.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Is the Lincoln Sprinter 180Si portable enough for site work?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"Yes -- at 19.5 lbs with an included shoulder carry strap, the Sprinter 180Si is one of the lightest professional Stick welders with 180 A output on the market. On 120 V it runs off any 20-amp generator outlet or household circuit without a dedicated 230 V power drop.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n","brand":"Lincoln Electric","offers":[{"title":"Base Model - K5453-1","offer_id":43639689805975,"sku":"K5453-1","price":979.0,"currency_code":"USD","in_stock":true},{"title":"Foot Pedal TIG One-Pak \u0026 Case - K5585-2","offer_id":46931659915415,"sku":"K5585-2","price":1619.0,"currency_code":"USD","in_stock":true},{"title":"Hand Amptrol TIG One-Pak \u0026 Case - K5953-2","offer_id":46931797180567,"sku":"K5953-2","price":1629.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/NewProject.png?v=1782836827"},{"product_id":"lincoln-power-mig-211i-mig-welder","title":"Used Lincoln POWER MIG® 211i MIG Welder","description":"\u003cdiv class=\"pdp-body\" data-template=\"template-a-mig\" data-batch=\"mig-batch-1\"\u003e\n\n\u003c!-- TLDR --\u003e\n\u003cdiv class=\"pdp-tldr\"\u003e\n\u003cp\u003e\u003cstrong\u003eLincoln POWER MIG® 211i MIG Welder\u003c\/strong\u003e is built for production MIG and Flux-Cored welding. Output ranges from 30-300A with a 40% @ 250A duty cycle. Runs on 208\/230\/460\/575V (single-phase) and feeds 0.025 - 3\/64 in (0.6 - 1.2 mm) wire. Ready for MIG, Flux-Cored.\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003c!-- Spec Table --\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable class=\"pdp-spec-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePOWER MIG® 211i\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer Code\u003c\/th\u003e\n\u003ctd\u003eK3520-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutput Amperage Range\u003c\/th\u003e\n\u003ctd\u003e30-300A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDuty Cycle\u003c\/th\u003e\n\u003ctd\u003e40% @ 250A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInput Voltage\u003c\/th\u003e\n\u003ctd\u003e208\/230\/460\/575V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePhase\u003c\/th\u003e\n\u003ctd\u003eSingle-phase\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWire Diameter Range\u003c\/th\u003e\n\u003ctd\u003e0.025 - 3\/64 in (0.6 - 1.2 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWelding Processes\u003c\/th\u003e\n\u003ctd\u003eMIG, Flux-Cored\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e247 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003c!-- Downloads --\u003e\n\u003ch2\u003eDownloads \u0026amp; Documentation\u003c\/h2\u003e\n\u003cdiv class=\"pdp-downloads\"\u003e\n  \u003ca href=\"https:\/\/ch-delivery.lincolnelectric.com\/api\/public\/content\/36c2a1178b884ba3b0365128a348f4c0?v=aa7f4e17\" class=\"pdp-download-btn\" data-doc=\"spec-sheet\" target=\"_blank\" rel=\"noopener\"\u003eSpec Sheet (PDF)\u003c\/a\u003e\n  \u003ca href=\"https:\/\/ch-delivery.lincolnelectric.com\/api\/public\/content\/2e647b75784244f1b6fa2a8152331c4a?v=bb23960c\" class=\"pdp-download-btn\" data-doc=\"owners-manual\" target=\"_blank\" rel=\"noopener\"\u003eOwner's Manual (PDF)\u003c\/a\u003e\n  \u003ca href=\"https:\/\/lincolnelectric.app.documoto.com\/ui\/book\/1056038\" class=\"pdp-download-btn\" data-doc=\"parts-list\" target=\"_blank\" rel=\"noopener\"\u003eParts List (PDF)\u003c\/a\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduction MIG welding\u003c\/strong\u003e — built for high-output continuous MIG work on mild steel and stainless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFabrication shops\u003c\/strong\u003e — runs flux-cored self-shielded wire for outdoor and dirty-metal applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight-to-medium structural\u003c\/strong\u003e — handles 3\/16\" to 1\/4\" base metal with appropriate wire selection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c!-- FAQ --\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat welding processes does the POWER MIG® 211i support?\u003c\/h3\u003e\n\u003cp\u003eIt supports MIG, Flux-Cored.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's the duty cycle on the POWER MIG® 211i?\u003c\/h3\u003e\n\u003cp\u003e40% @ 250A. This means continuous welding at that amperage for the listed percentage of a 10-minute cycle before requiring cool-down.\u003c\/p\u003e\n\n\u003ch3\u003eWhat input voltage does it require?\u003c\/h3\u003e\n\u003cp\u003e208\/230\/460\/575V on single-phase power.\u003c\/p\u003e\n\n\u003ch3\u003eWhat wire diameters can it feed?\u003c\/h3\u003e\n\u003cp\u003e0.025 - 3\/64 in (0.6 - 1.2 mm) — covers standard MIG wire sizes from sheet metal through medium structural work.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this come with a warranty?\u003c\/h3\u003e\n\u003cp\u003eAll new Lincoln Electric welders ship with the standard Lincoln 3-year warranty (parts and labor) on the power source. Consumables and contact tips are wear items not covered by warranty. Factory-demo units carry the Lincoln demo warranty — contact us for current terms.\u003c\/p\u003e\n\n\u003c\/div\u003e","brand":"Lincoln Electric","offers":[{"title":"Factory Reconditioned","offer_id":43639683809431,"sku":"U6080-1","price":1449.0,"currency_code":"USD","in_stock":false},{"title":"Base Model","offer_id":44227498311831,"sku":"K6080-1","price":1599.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/lincoln-power-mig-211i-mig-factory-demo-welder-u6080-1-lincoln-electric-1.png?v=1753402830"},{"product_id":"lincoln-start-all-2500a-jump-pack-k5962-1","title":"Lincoln Start All 2500A Jump Pack - K5962-1","description":"\u003cp data-eapps-font-size=\"16\" data-eapps-line-height=\"24\"\u003eAt only 4.4 lbs, this jump starter and power pack can stay with you and charge throughout your day. Charge multiple mobile devices at the same time!\u003cbr\u003e\u003cbr\u003eThe Start•All® Jump•Pack is equipped with proprietary technology, which provides an instantaneous energy transfer to the battery the moment the cables are properly connected, which maximizes jump starter performance.\u003c\/p\u003e\n\u003ch3 data-eapps-font-size=\"24\" data-eapps-line-height=\"28\"\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstantly jump starts gas engines up to 6 liters or start diesel engines up to 4 liters.\u003c\/li\u003e\n\u003cli\u003eCharges any USB device including cell phones, tablets, and gaming devices with multiple power ports.\u003c\/li\u003e\n\u003cli\u003ePowers mobile equipment such as your laptop or tools with the convenient AC plug.\u003c\/li\u003e\n\u003cli\u003eProvides 500 Lumen LED emergency light with high\/low and SOS Emergency strobe functions.\u003c\/li\u003e\n\u003cli\u003ePower Ports Included:\u003cbr\u003e(1) DC Auxiliary Power Port\u003cbr\u003e(4) 2.1A USB Ports\u003cbr\u003e(2) 12V 3.5A, 6mm Port\u003cbr\u003e(1) 12V AC Wall Plug\u003c\/li\u003e\n\u003cli\u003eProtect•All® Safety Technology provides longer durability and eliminates wear points\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lincoln Electric","offers":[{"title":"Default Title","offer_id":47981026345111,"sku":"K5962-1","price":321.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/K5962-1_Jump-Pack-2500A_006.jpg?v=1783425136"},{"product_id":"lincoln-start-all-5000a-jump-pack-k5961-1","title":"Lincoln Start All 5000A Jump Pack - K5961-1","description":"\u003cp data-eapps-font-size=\"16\" data-eapps-line-height=\"24\"\u003e\u003cstrong data-eapps-font-size=\"16\" data-eapps-line-height=\"24\"\u003eEasily jump start a vehicle, charge phones, tablets, laptops, and portable gaming devices with multiple power ports!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003ePowering your computer or electronics easily with the large capacity 118.4 Wh lithium-ion battery. This lightweight power pack can recharge your devices through the USB, 6 mm ports or the DC charging port.\u003cbr\u003e\u003cbr\u003eThe Start•All® Jump•Pack is equipped with proprietary technology, which provides an instantaneous energy transfer to the battery the moment the cables are properly connected, which maximizes jump starter performance.\u003c\/p\u003e\n\u003ch3 data-eapps-font-size=\"24\" data-eapps-line-height=\"28\"\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInstantly starts gasoline and diesel engines up to 10 liters for sprinter vans, dual-rear-wheel (DRW) trucks, and commercial trucks\u003c\/li\u003e\n\u003cli\u003eEasily charge phones, tablets, laptops, and portable gaming devices with multiple power ports\u003c\/li\u003e\n\u003cli\u003ePower Ports Include:\u003cbr\u003e(2) DC Auxiliary Power Ports\u003cbr\u003e(2) 2.1A USB Ports\u003cbr\u003e(1) 12V Output Port\u003c\/li\u003e\n\u003cli\u003eProtect•All® Safety Technology provides longer durability and eliminates wear points\u003c\/li\u003e\n\u003cli\u003e500 Lumen LED Emergency Light with High\/Low and SOS Emergency strobe functions\u003c\/li\u003e\n\u003cli\u003eLarge metal clamp with 1\/0-gauge jumper cables\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lincoln Electric","offers":[{"title":"Default Title","offer_id":47981032898711,"sku":"K5961-1","price":674.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/K5961-1_Jump-Pack_5000A_006.jpg?v=1783425136"}],"url":"https:\/\/weldingmart.com\/collections\/iola-car-show-eaa-specials.oembed","provider":"WeldingMart.com","version":"1.0","type":"link"}