MATHEY DEARMAN - LEVER CAGE CLAMPS (NO-TACK)
Mathey Dearman Cage Clamps are available in either tack or no-tack versions, ranging in sizes for pipes 2” to 60” (51 mm to 1524 mm). Our Cage Clamps will align pipe through Schedule 80. Cage Clamps are intended for alignment use only are not designed to reform pipe. Each size Clamp fits one specific pipe diameter. If the O.D. of the pipe varies more than +/- 3/16" (5 mm) from the indicated Clamp diameter, pipes may not align accurately.
- QUICK | Aligns pipes easily and fast
- EFFICIENT | Good choice when aligning pipes with no reforming required
Cage Clamp Cross Bar Designs
Tack-type straight cross bars have flared ends so pipes can be moved easily into position and clamped. After the pipe is tack welded, the clamp is removed from the pipe and the weld is completed.
No-tack cross bars are arched to permit a full-circle weld without removing the Clamp. The no-tack Clamp can help increase welding quality and efficiency.
|Tack-type||No-Tack-type||Pipe Size Range (in / mm)
Clamps with stainless steel contact points or for odd-size pipe available on request.
Add SS at end of part number for stainless steel.
|Custom Stock Status||/ Ships via Truck|