MILLER - MILLERMATIC 141
A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the hassle of finding parameters. Simply set the wire diameter, set the material thickness, and start welding!
Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.
Angled All Aluminum Drive System
Robust wire drive with Quick Select™ drive roll and calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns.
Quick Select™ Drive Roll
Makes setup quicker by offering three grooves - two for different size solid wire and a third for flux-cored wire.
120V Input Power
Uses 120V household input power so there is no special power requirements. Flexible to use in any location!
This technology provides a smooth, spatter-free start. The best starting machine in the 120V MIG category! No more pop-gun starts or spatter to clean up.
Auto Spool Gun Detect™
Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
Thermal Overload & 'Tip Saver' Short Circuit Protection
Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded. Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage.
|Custom Stock Status||/ Ships via Truck|
907612 Comes with -
6.5-ft. (2 m) power cord with plug
10-ft. (3 m), M-100 MIG gun and cable assembly
10-ft. (3 m) work cable with clamp
Argon and AR/CO2 mix flow gauge regulator with gas hose
Hobart® spool of .030-in. (0.8 mm) solid wire
Two contact tips for .030-in. (0.8 mm) wire
Quick SelectTM drive rolls for .024-in. (0.6 mm) or .030/.035-in. (0.8/0.9 mm) solid wire, and .030/.035-in. (0.8/0.9 mm) flux-cored wire
Material thickness gauge #229 895
Velcro cord wraps
951602 comes with all the above and #301239 Running Gear/Cylinder Rack
|Input Phase||Single PHASE|
|Input power||Requires 1-Phase power 120V, 20 Amps, 60 Hz|
|Max. Open Circuit Voltage||30|
|MaxSpoolSize Capacity||8 in (203 mm)|
|Rated Ouput||90 Amps at 18.5 VDC, 20% duty cycle|
|Welding Amperage Range||30 - 140 Amps|
|Wire Speed||15 - 136 IPM (0.4 - 9.1 m/min)|
.024 - .030 in (0.6 - 0.8 mm) Solid Steel
.024 - .030 in (0.6 - 0.8 mm) Stainless
.030 - .035 in (0.8 - 1.2 mm) Flux Cored