MILLER - SPECTRUM 375 X-TREME Plasma Cutter - 907529
Special Price $1,465.00 $1853.00
Rated Cutting Capacity
The rated cutting capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness requirements.
Auto-Line™ and MVP™ (multi-voltage plug)
Auto-Line provides state-of-the-art flexibility to the end user. The Auto-Line circuitry automatically connects to 120–240 VAC, single-phase power, 50/60 Hz, without removing the covers to relink the power source. Miller’s multi-voltage plug (MVP™) allows connection to 120 or 240 V receptacles without tools—choose the plug that fits the receptacle and connect it to the power cord.
Automatic Air Regulation
The unit automatically compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting performance.
Miller's X-CASE provides ultimate protection during transport and storage. Additional space is ideal for MVP Plugs, consumable box, as well as gloves, eye protection, etc.
Ergonomic handle with unique no-slip grip, thumb guide and finger contours help prevent operator fatigue while the flexible cable makes maneuvering easy.
Auto-Refire™ Technology provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal—all automatically! No need for manual re-triggering which reduces user hand fatigue.
Portable in the shop or at the job site—at 19 lb the shoulder strap allows the end user to easily move from location to location.
Wind Tunnel Technology™ and Fan-On-Demand™
Wind Tunnel Technology - internal air flow that protects electrical components and PC boards from dirt, dust, debris…greatly improving reliability. Fan-On-Demand cooling system only operates when needed. In dirty or dusty environments, this feature reduces the amount of airborne dust/dirt pulled through the unit.
|Custom Stock Status||/ Ships via Truck|
XT30 hand-held torch with 12-ft. (3.7 m) cable
Heavy-duty work clamp with 12-ft. (3.7 m) cable
X-CASETM provides protection in transport and storage
10-ft. (3 m) MVPTM power cord
MVP plugs 5-15P (120 V, 15 A), 6-50P (240 V, 50 A)
Consumables box with 2 electrodes, 2 tips, deflector, and air fitting
|Calculate Shipping||Per Product Quantity|
|Input power||120 - 240 Volts, 1-Phase, 50/60 Hz|
|Rated output voltage||
240 V - 30 A at 92 VDC, 35% duty cycle|
120 V (20A) - 27 A at 92 VDC, 20% duty cycle
|Recommended gas inlet flow rate/pressure||5 SCFM (146 L/min) at 90 PSI MIN (621 KPa) 120 PSI MZX (828 kPa)|
MILD STEEL CUTTING CAPACITY
3/8 in (9.5 mm) at 14 IPM
1/4 in (6.4 mm) at 27 IPM
Maximum Sever cut of 5/8 in. (15.9 mm)
|Welding Amperage Range||14 - 30 Amps|
300184 - CASE,CARRYING X-CASE
300517 - ADAPTER CORD,ENGINE DRIVE