MILLER - SPECTRUM 625 X-TREME 20FT XT40 TORCH, X-CASE - 907579001
Rated Cutting Capacity
The rated cutting capacity is based on traveling approximately 15 inches per minute to achieve a steady, precise cut. This is the key rating that should meet or exceed your typical cutting thickness requirements.
Auto-Line™ and MVP™ (multi-voltage plug) Adapters
Auto-Line provides state-of-the-art flexibility to the end user. The Auto-Line circuitry automatically connects to 120–240 VAC, single-phase power, 50/60 Hz, without removing the covers to relink the power source. Miller’s multi-voltage plug (MVP™) Adapters allow connection to 120 or 240 V receptacles without tools—choose the adapter that fits the receptacle and connect it to the power cord.
Automatic Air Regulation
The unit automatically compensates for input pressure variation to provide constant recommended torch pressure for optimum cutting and gouging performance.
Miller's X-CASE provides ultimate protection during transport and storage. Additional space is ideal for MVP Plug Adapters, consumable box, as well as gloves, eye protection, etc.
Ergonomic handle with unique no-slip grip, thumb guide and finger contours help prevent operator fatigue while the flexible cable makes maneuvering easy.
Auto-Refire™ Technology provides ultimate customer convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. The pilot arc will switch in and out as fast as needed when cutting expanded metal and provides maximum power for cutting thicker metal—all automatically! No need for manual re-triggering which reduces user hand fatigue.
Portable in the shop or at the job site—at 21 pounds the shoulder strap allows the end user to easily move from location to location.
Automatic Gouging Consumable Detection
Detects gouging consumables and adjusts gas pressure to optimize performance, eliminating the need for a manual regulator.
|Custom Stock Status||/ Ships via Truck|
XT40 hand-held torch with 12-ft. (3.7 m) or 20-ft. (6.1 m) cable. Includes a complete set of 40 A consumables
Heavy-duty work clamp with 12-ft. (3.7 m) or 20-ft. (6.1 m) cable
X-CASETM provides protection in transport and storage
12-ft. (3.7 m) power cord with 240 V L6-30P twist lock plug for MVPTM adapters
MVPTM adapters with 240 V, 50A (6-50P) plug and 120 V, 15 A (5-15P) plug
Consumables box with 2 electrodes, 2 tips (40 A), 1 tip (30 A), drag shield (30 A), deflector, and air fitting
|Input power||120 - 240 Volts, 1-Phase, 50/60 Hz|
|Rated output voltage||
40 A at 140 VDC, 50% duty cycle
27 A at 91 VDC, 20% duty cycle
|Recommended gas inlet flow rate/pressure||6 SCFM (170 L/min) at 90 PSI MIN (621 kPa) 120 PSI MAX (828 kPa)|
Mild Steel Cutting Capacity
5/8 in (15.9 mm) at 13 IPM
1/4 in (6.4 mm) at 64 IPM
Maximum Sever cut of 7/8 in. (22.2 mm) cutting at 40 amps (240 V service).
|Welding Amperage Range||20 - 40 Amps|
300184 - CASE,CARRYING X-CASE
300517 - ADAPTER CORD,ENGINE DRIVE