{"product_id":"lincoln-blue-max-2100-stick-smaw-welding-rod","title":"Lincoln Blue Max 2100 Stick SMAW Welding Rod","description":"\u003c!-- Stick Lane A | handle: lincoln-blue-max-2100-stick-smaw-welding-rod | 2026-06-16 --\u003e\n\u003csection class=\"pdp-overview\"\u003e\n  \u003ch2\u003eLincoln Blue Max 2100 E308L-16 Stainless Steel Electrode — Overview\u003c\/h2\u003e\n  \u003cp\u003e\u003cstrong\u003eLincoln Blue Max 2100\u003c\/strong\u003e is an \u003cstrong\u003eAWS A5.4\/A5.4M E308L-16\u003c\/strong\u003e stainless steel SMAW electrode delivering an austenitic 308L deposit for joining and overlaying 304 and 304L stainless steel — the most widely specified austenitic stainless steel in food processing, pharmaceutical, chemical, and dairy equipment. The \"L\" designation limits carbon content to ≤ 0.04% to minimize sensitization and intergranular corrosion in the heat-affected zone, making Blue Max 2100 the right choice where weld joints will be exposed to corrosive media without post-weld solution annealing. The \"-16\" rutile-lime coating runs on \u003cstrong\u003eAC or DC+\u003c\/strong\u003e, providing flexibility for use on AC machines in field installations. WeldingMart stocks Lincoln Blue Max 2100 as an authorized Lincoln Electric distributor.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"pdp-specs\"\u003e\n  \u003ch2\u003eSpecifications\u003c\/h2\u003e\n  \u003ctable class=\"grade-spec-table\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003cth\u003eAWS classification\u003c\/th\u003e\n\u003ctd\u003eAWS A5.4\/A5.4M E308L-16\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eDeposit alloy\u003c\/th\u003e\n\u003ctd\u003eAustenitic 308L stainless (~20% Cr, 10% Ni, ≤ 0.04% C)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eCoating type\u003c\/th\u003e\n\u003ctd\u003eRutile-lime (-16 coating)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003ePolarity\u003c\/th\u003e\n\u003ctd\u003eDC+ (DCEP) or AC\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eWelding positions\u003c\/th\u003e\n\u003ctd\u003eAll positions: 1G, 2G, 3G, 4G (flat, horizontal, vertical, overhead)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eMinimum tensile strength\u003c\/th\u003e\n\u003ctd\u003e80,000 psi (552 MPa)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eFerrite number (FN)\u003c\/th\u003e\n\u003ctd\u003e5–15 FN (per AWS A5.4 requirements)\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eTypical current range\u003c\/th\u003e\n\u003ctd\u003e3\/32 in: 40–80 A | 1\/8 in: 65–110 A | 5\/32 in: 90–140 A | 3\/16 in: 115–175 A\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eAvailable diameters\u003c\/th\u003e\n\u003ctd\u003e3\/32, 1\/8, 5\/32, 3\/16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eBase metals welded\u003c\/th\u003e\n\u003ctd\u003e304, 304L, 308, 308L stainless steel; also overlaying carbon steel with stainless\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eLincoln Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eStandards compliance\u003c\/th\u003e\n\u003ctd\u003eAWS A5.4\/A5.4M; ASME Section IX P-No. 8\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"pdp-applications\"\u003e\n  \u003ch2\u003eApplications \u0026amp; Industries\u003c\/h2\u003e\n  \u003cp\u003eBlue Max 2100 (E308L-16) is the standard stainless SMAW electrode for food-grade, pharmaceutical, and chemical service:\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFood processing equipment:\u003c\/strong\u003e Tanks, vessels, conveyors, and piping fabricated from 304\/304L stainless steel where corrosion resistance and cleanability are required — dairy lines, breweries, slaughterhouses, and beverage processing\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePharmaceutical and biotech:\u003c\/strong\u003e Sanitary process piping and vessels in 304L stainless where USDA\/FDA cleanability standards apply\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eChemical process equipment:\u003c\/strong\u003e Tanks and piping handling dilute acids, chlorides, and organic compounds where 304\/308L corrosion resistance is sufficient\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCryogenic applications:\u003c\/strong\u003e 308L austenitic stainless maintains ductility at cryogenic temperatures; used for LNG, liquid nitrogen, and cryogenic vessel fabrication\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaintenance and repair:\u003c\/strong\u003e Field repair of existing 304 stainless equipment in chemical plants, canneries, and industrial kitchens\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"pdp-technique\"\u003e\n  \u003ch2\u003eProcess Technology — How to Weld Stainless Steel with E308L-16\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHeat input control:\u003c\/strong\u003e Use the minimum amperage that produces a sound, fully fused bead. Excessive heat input on stainless steel widens the HAZ, increases distortion, and promotes sensitization even in 308L. Keep heat input below 35 kJ\/in where possible.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInterpass temperature:\u003c\/strong\u003e Limit interpass temperature to 350°F (177°C) maximum for austenitic stainless steel. Allow the joint to cool between passes — this is the most common error on stainless fabrication and the primary cause of distortion and sensitization.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eStringer beads:\u003c\/strong\u003e Use stringer beads rather than weaving. Stringers minimize width of the heat-affected zone and reduce distortion in austenitic stainless.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBacking gas (purge):\u003c\/strong\u003e For pipe joints and full-penetration welds, purge the root side of the joint with argon to prevent oxidation of the root bead. Without purging, the root bead will show \"sugaring\" (oxidation) that reduces corrosion resistance.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSurface preparation:\u003c\/strong\u003e Clean the weld zone with stainless-steel-dedicated wire brushes and solvents. Do not use carbon steel wire brushes or grinding wheels that have been used on carbon steel — contamination will cause rust in the stainless weld.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003ePost-weld cleaning:\u003c\/strong\u003e Passivate the weld zone with citric acid or nitric acid solution to restore the chromium oxide passive film. Remove all weld spatter with stainless chisels (not carbon steel).\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"pdp-storage\"\u003e\n  \u003ch2\u003eStorage \u0026amp; Handling\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eStore in original sealed packaging in a dry location at ambient temperature\u003c\/li\u003e\n    \u003cli\u003eStainless steel electrodes (AWS A5.4) are not classified as low-hydrogen in the same manner as carbon steel electrodes, but should be kept dry\u003c\/li\u003e\n    \u003cli\u003eIf electrodes have been exposed to moisture, re-dry at 300–400°F (149–204°C) for 30–60 minutes before use\u003c\/li\u003e\n    \u003cli\u003eUse stainless-dedicated storage containers — do not mix with carbon steel electrodes\u003c\/li\u003e\n    \u003cli\u003eProtect from contamination with carbon steel particles, dirt, and grease\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"pdp-faq\"\u003e\n  \u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n  \u003cdl\u003e\n    \u003cdt\u003eWhat is E308L used for?\u003c\/dt\u003e\n    \u003cdd\u003eE308L-16 (Lincoln Blue Max 2100) is used to weld 304 and 304L austenitic stainless steel — the most common stainless steel in food processing, pharmaceutical, chemical, and cryogenic applications. The \"L\" low-carbon grade minimizes sensitization (carbide precipitation at grain boundaries) and is the preferred choice when weld joints will be exposed to corrosive environments without post-weld heat treatment.\u003c\/dd\u003e\n\n    \u003cdt\u003eWhat is the difference between 308L and 309L stainless electrodes?\u003c\/dt\u003e\n    \u003cdd\u003eE308L is used for welding 304\/304L stainless to itself. E309L is used for welding stainless steel to carbon steel (dissimilar metal joints) or as a butter layer before overlaying carbon steel with stainless. The higher chromium and nickel in 309L provides a chemical \"bridge\" that handles the dilution from carbon steel without losing austenitic corrosion resistance. Use 308L for SS-to-SS; use 309L for SS-to-carbon steel.\u003c\/dd\u003e\n\n    \u003cdt\u003eDo I need to purge the back of the weld when using E308L?\u003c\/dt\u003e\n    \u003cdd\u003eFor pipe joints and full-penetration welds where the root side will be exposed to corrosive service, an argon purge on the back of the root is strongly recommended. Without purge, the root bead oxidizes (\"sugars\") during welding, creating a porous, rough surface that traps contaminants and corrodes preferentially. In shop practice on plate or non-critical welds, purging may be omitted — but for food, pharmaceutical, and chemical service piping, back purging is standard.\u003c\/dd\u003e\n\n    \u003cdt\u003eCan I use E308L on 316 stainless steel?\u003c\/dt\u003e\n    \u003cdd\u003eFor most non-critical applications, E308L can be used on 316\/316L stainless with acceptable results, since the 308L deposit has higher toughness and the 2–3% Cr and Ni difference rarely matters in low-chloride environments. For high-chloride or aggressive chemical service where 316's molybdenum content is essential, use an AWS A5.4 E316L electrode to match the molybdenum-bearing deposit. Confirm with your design specification.\u003c\/dd\u003e\n  \u003c\/dl\u003e\n\u003c\/section\u003e\n\n\u003csection class=\"pdp-crosslinks\"\u003e\n  \u003cp\u003e\u003cstrong\u003eBrowse all stainless electrodes:\u003c\/strong\u003e \u003ca href=\"\/collections\/stick-welding-electrodes-rods\"\u003eStick Welding Electrodes \u0026amp; Rods\u003c\/a\u003e — or compare with a \u003ca href=\"\/products\/lincoln-excalibur-7018-stick-smaw-welding-rod\"\u003eLincoln Excalibur 7018\u003c\/a\u003e for carbon steel fill passes.\u003c\/p\u003e\n\u003c\/section\u003e\n\n\u003cscript type=\"application\/ld+json\"\u003e\n{\n  \"@context\": \"https:\/\/schema.org\",\n  \"@type\": \"FAQPage\",\n  \"mainEntity\": [\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is E308L used for?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"E308L-16 is used to weld 304 and 304L austenitic stainless steel in food processing, pharmaceutical, chemical, and cryogenic applications. The low-carbon 'L' grade minimizes sensitization when weld joints will be exposed to corrosive environments without post-weld heat treatment.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"What is the difference between 308L and 309L stainless electrodes?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"E308L welds 304\/304L stainless to itself. E309L welds stainless to carbon steel (dissimilar metal joints) or as a butter layer. Use 308L for SS-to-SS; use 309L for SS-to-carbon steel.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Do I need to purge the back of the weld when using E308L?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"For pipe joints and full-penetration welds in food, pharmaceutical, or chemical service, argon back purging is strongly recommended to prevent root bead oxidation (sugaring). For non-critical plate welds, purging may be omitted.\"\n      }\n    },\n    {\n      \"@type\": \"Question\",\n      \"name\": \"Can I use E308L on 316 stainless steel?\",\n      \"acceptedAnswer\": {\n        \"@type\": \"Answer\",\n        \"text\": \"For most non-critical applications, E308L can be used on 316\/316L with acceptable results. For high-chloride or aggressive chemical service where molybdenum is essential, use E316L to match the deposit chemistry.\"\n      }\n    }\n  ]\n}\n\u003c\/script\u003e\n","brand":"Lincoln Electric","offers":[{"title":"3\/32 in · 10 lb Easy Open Can (3-Pack)","offer_id":43638093512855,"sku":"ED032298","price":295.35,"currency_code":"USD","in_stock":true},{"title":"1\/8 in · 10 lb Easy Open Can (3-Pack)","offer_id":43638094790807,"sku":"ED032299","price":290.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0628\/7140\/4695\/files\/lincoln-ed032298-blue-max-2100-stick-smaw-welding-rod-332-14-in-3-10-lb-easy-open-cans-lincoln-electric.jpg?v=1765594746","url":"https:\/\/weldingmart.com\/products\/lincoln-blue-max-2100-stick-smaw-welding-rod","provider":"WeldingMart.com","version":"1.0","type":"link"}