What applications and base metals is the Harris Dynaflow White Paste Brazing Flux - 50 Pound Pail - DYNAW50 suitable for?

Brazing flux is used with silver brazing alloys and some copper-phosphorus alloys when joining copper to dissimilar metals. Phos-copper alloys (BCuP series) are self-fluxing on copper-to-copper joints but still require flux when brazing copper to brass, bronze, or steel. Always use the flux recommended by the filler metal manufacturer for the specific alloy and temperature range.

How do I remove flux residue after using the Harris Dynaflow White Paste Brazing Flux - 50 Pound Pail - DYNAW50?

All flux residue must be removed after completing the joint. For brazing and soldering, clean flux residue with warm water and a stiff brush immediately after the joint cools — flux becomes harder to remove as it ages. For SAW welding, remove slag and flux residue with a chipping hammer and wire brush between passes and after final welding. Confirm complete flux removal, especially in pressure vessel, pipe, and food-grade applications where residue can cause corrosion or contamination.

How should I store the Harris Dynaflow White Paste Brazing Flux - 50 Pound Pail - DYNAW50?

Store flux in a sealed container in a cool, dry location. Moisture contamination degrades paste and powder fluxes — activated flux or flux that has absorbed moisture should be discarded and not used, as it can cause porosity or incomplete flux activation during the joining operation. Keep containers sealed between uses.

Harris Dynaflow White Paste Brazing Flux - 50 Pound Pail - DYNAW50

Q: What is the Harris Dynaflow White Paste Brazing Flux - 50 Pound Pail - DYNAW50 used for?

The Harris Dynaflow White Paste Brazing Flux - 50 Pound Pail - DYNAW50 is a brazing flux that prevents oxidation on base metal and filler metal surfaces during torch brazing. Brazing flux is activated by heat — it liquefies at brazing temperature to coat the joint and exclude oxygen. Apply flux to all joint surfaces before heating. After brazing, remove all flux residue with warm water and a brush — brazing flux residue is corrosive and must be completely removed after the joint cools.

Q: How do I apply the Harris Dynaflow White Paste Brazing Flux - 50 Pound Pail - DYNAW50 correctly?

Apply flux using an appropriate method for the process: brush application for soldering and brazing fluxes (cover all joint surfaces evenly), pre-placed granular flux feeding for SAW welding. Flux quantity matters — too little flux leaves bare areas that oxidize; too much flux can be difficult to remove after welding or brazing. Apply a thin, even coat to all contact surfaces.

SKU: DYNAW50

$577.52

Financing / Leasing Available

Welding Equipment & Industrial Supply Financing

WeldingMart has partnered with Clicklease to offer fast, flexible financing for welding equipment and industrial supplies. Get the equipment you need with affordable monthly payments tailored to your budget.

Whether you're purchasing a new MIG welder, TIG welder, engine-driven welder, or welding accessories, our financing solutions help you equip your shop without large upfront costs. We offer lease-to-own options on trusted brands like Lincoln Electric, Miller Electric, and more.

Apply in minutes and get a decision in seconds:

No hard credit check
No lengthy paperwork
Fast approvals

Why Choose Lease-to-Own Welding Equipment?

Lease-to-own financing gives you the flexibility to grow your business while preserving cash flow.

Key benefits include:

Low upfront cost – Start using equipment without a large initial investment
Flexible terms – Choose payment plans that fit your budget
Access to latest technology – Stay competitive with modern welding equipment
Ownership options – Buy the equipment, upgrade, or return it at the end of the lease

You also have the option to purchase your equipment early, including within the first 12 months.

Tax Advantages

In many cases, lease payments for business-use equipment may be tax-deductible. This can reduce your overall cost and free up capital for additional tools, supplies, or labor.

(Consult your tax advisor for details.)

Apply in Minutes

Financing is available 24/7, so you can apply whenever it’s convenient.

Application takes about 4 minutes
Instant decision in most cases
Immediate access to eDocs
Order your equipment right away

If approved for more than your initial request, you can easily adjust your financing to include additional items.

Need Help?

Have questions about financing or lease-to-own options?

Contact the WeldingMart team — we’re here to help you find the right solution for your business. 877-532-9353.

Dynaflow® white paste brazing flux 1 ea. 50 lb. pail

Overview

Harris Dynaflow White Paste Brazing Flux - 50 Pound Pail - DYNAW50

Dynaflow flux is a white paste silver brazing flux designed for brazing copper, brass, bronze, steel, and other ferrous base metals. The flux is formulated to provide a smooth consistency that makes it an ideal choice for automated or semi-automated dispensing. Dynaflow flux is a proprietary mixture of boric acid and fluoride compounds designed for optimum temperature activity and metal protection. Dynaflow flux is an excellent choice for use with silver braze alloys – Most AWS A5.8 BAg classifications and ISO 17672 class Ag compositions. The flux is also suitable for use with many phosphorus-copper-silver alloys, (AWS BCuP and ISO CuP), for brazing copper to brass.

Features

Excellent choice for use with silver braze alloys
Yields a smooth consistency
Good choice for automated or semi-automated dispensing
Formulation provides optimum temperature activity and metal protection
Works well with many phosphorus-copper-silver alloys (AWS BCuP and ISO CuP) for brazing copper-to-brass.
Activity range of 1050° F - 1600° F (566°C - 871° C)

Reviews

Q&A

Product Overview