Is the Lincoln E71TG-G-H16 (Innershield NR-212 FCAW-S Welding Wire) self-shielded or gas-shielded?

The Lincoln E71TG-G-H16 (Innershield NR-212 FCAW-S Welding Wire) is a self-shielded flux-cored wire (FCAW-S). Self-shielded wire generates its own shielding from the flux core — no external shielding gas is required. This makes it ideal for outdoor, windy conditions where gas shielding would be blown away. FCAW-S is widely used in structural field welding, construction, and heavy equipment repair.

What shielding gas and polarity does the Lincoln E71TG-G-H16 (Innershield NR-212 FCAW-S Welding Wire) require?

Self-shielded FCAW wire requires no shielding gas — the flux compounds in the core generate shielding gases and a slag blanket during welding. However, FCAW-S typically requires DC− (direct current, electrode negative) polarity — this is opposite to most MIG (solid wire) setups which use DC+. Verify your power source polarity before welding with self-shielded wire.

What is the AWS classification of the Lincoln E71TG-G-H16 (Innershield NR-212 FCAW-S Welding Wire)?

The Lincoln E71TG-G-H16 (Innershield NR-212 FCAW-S Welding Wire) carries AWS E71TG-G-H16 classification. The classification encodes the wire's usability characteristics, position capability, shielding gas type, and minimum deposit strength. Always verify the AWS classification matches your WPS (Welding Procedure Specification) requirements for code work under AWS D1.1, ASME IX, or other applicable standards.

What wire diameter is the Lincoln E71TG-G-H16 (Innershield NR-212 FCAW-S Welding Wire) available in?

The Lincoln E71TG-G-H16 (Innershield NR-212 FCAW-S Welding Wire) is available in .045, .068, 5/64 diameter. Common FCAW diameters: .035 in suits lighter section work, .045 in is the most common all-purpose diameter for structural fabrication, .052 in and 1/16 in suit heavy plate and high-deposition applications. Larger diameter wire requires higher amperage and is used in flat/horizontal positions for maximum deposition rate.

Call to Talk With A Product Expert - 877-532-WELD (9353)

1 7

Lincoln E71TG-G-H16 (Innershield NR-212 FCAW-S Welding Wire)

Q: How should I store the Lincoln E71TG-G-H16 (Innershield NR-212 FCAW-S Welding Wire) to prevent moisture pickup?

Flux-cored wire is more moisture-sensitive than solid MIG wire because the hygroscopic flux compounds in the core can absorb atmospheric moisture. Store opened spools in a sealed bag or container with a desiccant packet. Avoid leaving spools on the feeder overnight in humid environments. Wire that has absorbed moisture may produce porosity — if you see porosity that persists despite proper shielding gas flow, wire moisture is a likely cause. Discard wire with visible water damage.

SKU: ED026090

$106.55 ~~$114.60~~

Select Diameter & Package Size

Lincoln Elite Dealer

Free Shipping

Lowest Price

AWS / Classification: E71TG-G-H16, E71TG-AZ-G-H16

Visit our support center

Expert help & advice
Check your order status

Updates & Tracking
Returns & exchanges

All you need to know
Why WeldingMart.com

Our Promise To You