What welding processes does the Lincoln Power MIG 211i MIG Factory Demo Welder U6080-1 support?

This machine supports MIG (GMAW), Flux-Cored (FCAW). All listed processes are selectable from the front panel. Refer to the Owner's Manual for recommended parameters for each process.

What input voltage is required?

The machine operates on 120V, 230V, multi-voltage input power. It includes automatic voltage detection — no switch or re-link required. Consult a licensed electrician for proper circuit and disconnect sizing.

Is this a single-phase or three-phase machine?

This welder operates on single-phase power. Single-phase machines connect to standard commercial or industrial single-phase service.

What does duty cycle mean, and what is this machine's duty cycle?

Duty cycle is the percentage of a 10-minute period the welder can operate at its rated amperage without overheating. This machine is rated 120V: 95A/18.8V/60%, 230V: 175A/22.8V/30%. Exceeding the duty cycle triggers thermal protection; allow the unit to cool before resuming welding.

What wire diameters are compatible?

This machine is compatible with wire diameters of 0.025", 0.045". Solid and flux-cored wire are both supported with appropriate drive roll changes. Refer to the drive roll specification chart in the Owner's Manual.

What material thicknesses can this welder handle?

Rated for welding material from 24 ga, 22-18 ga. Thicker sections may require multiple passes or preheat depending on base metal and joint design. Refer to Lincoln Electric's recommended parameter charts for specific amperage and wire speed settings.

What is included with the purchase?

The package includes the welding machine, MIG gun, work clamp and cable, drive rolls, and operator's manual. Specific kit contents are listed in the What's in the Box section above. Shielding gas cylinder and wire spool are not included — sold separately.

What is the condition of this unit?

This unit is listed as Refurbished. WeldingMart inspects and tests all refurbished and factory-demo units before shipment. Each unit passes a full functional verification. Contact our support team for condition-specific details on this unit.

What is WeldingMart's return policy?

WeldingMart accepts returns within 30 days of receipt for items in original, unused condition. Refurbished and factory-demo units may have modified return terms — contact us before ordering if you need clarification. All returns require a Return Merchandise Authorization (RMA). Shipping costs are the customer's responsibility unless the return is due to our error.

What is the part number or SKU for this product?

The part number is U6080-1. Use this number when contacting WeldingMart support or ordering replacement parts. For Lincoln Electric warranty registration, use the serial number found on the machine's data tag.

1 8

Used Lincoln Power MIG 211i MIG — Factory Demo Welder U6080-1

SKU: U6080-1

$1,449.00 ~~$1,599.99~~

Backordered

Choose Your Model

Full New Factory Warranty Same warranty as a brand-new unit — backed by Lincoln Electric.

Lincoln Elite Dealer

Free Shipping

Lowest Price

The Lincoln Power MIG 211i - U6080-1 is a rugged, no-nonsense MIG welder delivering reliable performance for everyday welding tasks. With dual voltage capability (120V/230V), straightforward controls, and weighing just 41 lbs, this dependable machine offers MIG and flux-cored welding perfect for farm work, small shops, and maintenance applications.

Input Power: Dual Voltage (120V/230V)

Overview

Lincoln Power MIG 211i MIG Factory Demo Welder U6080-1 is built for production MIG and Flux-Cored welding. Output ranges from 120V: 20-140A DC, 230V: 20-211A DC Max. with a 120V: 95A/18.8V/60%, 230V: 175A/22.8V/30% duty cycle. Runs on 120/230/1/60 (1-phase) and feeds 0.025 - 0.045 in wire. Ready for MIG, Flux-Cored, Spool Gun.

Specifications

Model	Power MIG 211i
Manufacturer Code	K6080-1
Output Amperage Range	120V: 20-140A DC, 230V: 20-211A DC Max.
Duty Cycle	120V: 95A/18.8V/60%, 230V: 175A/22.8V/30%
Input Voltage	120/230/1/60
Phase	1-Phase
Wire Diameter Range	0.025 - 0.045 in
Welding Processes	MIG, Flux-Cored, Spool Gun
Weight	41 lbs (18.6 kg)

Downloads & Documentation

Spec Sheet (PDF) Owner's Manual (PDF) Parts List (PDF)

Recommended Applications

Production MIG welding — built for high-output continuous MIG work on mild steel and stainless
Fabrication shops — runs flux-cored self-shielded wire for outdoor and dirty-metal applications
Light-to-medium structural — handles 3/16" to 1/4" base metal with appropriate wire selection

Frequently Asked Questions

What welding processes does the Power MIG 211i support?

It supports MIG, Flux-Cored, Spool Gun.

What's the duty cycle on the Power MIG 211i?

120V: 95A/18.8V/60%, 230V: 175A/22.8V/30%. This means continuous welding at that amperage for the listed percentage of a 10-minute cycle before requiring cool-down.

What input voltage does it require?

120/230/1/60 on 1-phase power.

What wire diameters can it feed?

0.025 - 0.045 in — covers standard MIG wire sizes from sheet metal through medium structural work.

Does this come with a warranty?

All new Lincoln Electric welders ship with the standard Lincoln 3-year warranty (parts and labor) on the power source. Consumables and contact tips are wear items not covered by warranty. Factory-demo units carry the Lincoln demo warranty — contact us for current terms.

Specifications

Machine Inputs & Outputs

Phase 1: Input Voltage #1 (Voltage/Phase/Hertz): 120/1/60
Phase 1: Rated Output #1A (Current/Voltage/Duty Cycle): MIG 95A/18.8/60% 75A/17.8V/100%
Phase 1: Input Current at Max Rated Ouput #1 (Current): 20A
Phase 1: Input Voltage #2 (Voltage/Phase/Hertz): 230/1/60
Phase 1: Rated Output #2A (Current/Voltage/Duty Cycle): MIG 175A/22.8V/30% 90A/18.6V/100%
Phase 1: Input Current at MAX Rated Output #2 (Current): 22.5A

Product Weights & Dimensions

Dimensions (H x W x D): 15.5 in x 10.75 in x 22 in (394 mm x 273 mm x 558 mm)
Net Weight: 41 lbs (18.6 kg)

Machine Technologies & Connections

IEC Rating: IP21S
Output Range by Mode: MIG: 20-211A
Machines Communication Technology: analog
Work Lead Connector Type: Dinse
Welding Gun Cable Assembly Length: Magnum PRO 100L
Work Cable Length: 10 FT
Spool Gun Compatible (Duty): Light

General Specification

Number of Operators per Machine: 1
Input Voltage: 120/230
Input Current: 120V: 15A, 230V: 15A
Input Hertz: 60
Input Phase: 1
Input Power: 120/230/1/60
Mode Icon: CV
Output Range: 120V: 20-140A DC 230V: 20-211A DC Max. OCV : 76V
Polarity: DC

Wire Feeding Specifications

UI type: Meters
Wire Feeders Processes: MIG, Flux Cored

Application

Typical Application: Construction, Automotive, General Fabrication, Maintenance & Repair, Repair Welding

Warranty

Warranty: 3 Years

Reviews

Q&A

Product Overview

Specifications

Model	Power MIG 211i
Manufacturer Code	K6080-1
Output Amperage Range	120V: 20-140A DC, 230V: 20-211A DC Max.
Duty Cycle	120V: 95A/18.8V/60%, 230V: 175A/22.8V/30%
Input Voltage	120/230/1/60
Phase	1-Phase
Wire Diameter Range	0.025 - 0.045 in
Welding Processes	MIG, Flux-Cored, Spool Gun
Weight	41 lbs (18.6 kg)

Downloads & Documentation

Spec Sheet (PDF) Owner's Manual (PDF) Parts List (PDF)

Recommended Applications

Production MIG welding — built for high-output continuous MIG work on mild steel and stainless
Fabrication shops — runs flux-cored self-shielded wire for outdoor and dirty-metal applications
Light-to-medium structural — handles 3/16" to 1/4" base metal with appropriate wire selection

Frequently Asked Questions

What welding processes does the Power MIG 211i support?

It supports MIG, Flux-Cored, Spool Gun.

What's the duty cycle on the Power MIG 211i?

120V: 95A/18.8V/60%, 230V: 175A/22.8V/30%. This means continuous welding at that amperage for the listed percentage of a 10-minute cycle before requiring cool-down.

What input voltage does it require?

120/230/1/60 on 1-phase power.

What wire diameters can it feed?

0.025 - 0.045 in — covers standard MIG wire sizes from sheet metal through medium structural work.

Used Lincoln Power MIG 211i MIG — Factory Demo Welder U6080-1

This Factory Demo unit is currently out of stock

Product Overview

Specifications

Downloads & Documentation

Recommended Applications

Frequently Asked Questions

What welding processes does the Power MIG 211i support?

What's the duty cycle on the Power MIG 211i?

What input voltage does it require?

What wire diameters can it feed?

Does this come with a warranty?

Specifications

Product Reviews

Questions & Answers