$500 End User Rebate (US Only) - See Details
A new Lincoln POWER MIG 262P Pulsed MIG Welder represents a significant capital investment. For the large majority of professional welders — fabrication shops, maintenance technicians, training programs, and advanced hobbyists — a WeldingMart used/demo Lincoln POWER MIG 262P delivers the same operational performance at a meaningful price reduction.
Here's what makes WeldingMart used MIG welders different from buying off a resale listing:
- Operationally verified before listing: Every unit is tested for arc quality and process function before it's listed. If it doesn't perform to spec, it doesn't ship.
- Lincoln Electric provenance: All units in this collection are Lincoln Electric machines — manufactured to the same standards as new units, reconditioned or demo-run under controlled conditions. Browse all used MIG welders →
- Transparent condition documentation: Each unit is listed with its condition tag (Demo, Reconditioned) and SKU. The condition is the actual condition — not a generic "used" label.
- 3x margin category — we stand behind it: Used MIG welders are our highest-margin category precisely because we invest in reconditioning and verification. Every dollar of savings you capture is real.
- New version always available: If this unit sells or you decide you want factory-new, the current production Lincoln POWER MIG 262P is available. View new Lincoln POWER MIG 262P →
For operators who need Pulsed MIG, MIG, Flux-Cored, Stick, DC TIG capability — output: 10–300A, duty cycle: 250A/27V/40% — the WeldingMart used Lincoln POWER MIG 262P is one of the strongest value propositions in its category.
The word "used" gets applied to everything from beat-up resale machines to factory demonstration units with single-digit hours. At WeldingMart, every used MIG welder goes through a documented verification process before it earns a listing.
- Intake & Documentation. Every unit is photographed at arrival, serial numbers recorded, operational hours documented (where available), and a full condition assessment completed before any work begins. We know exactly what we're listing — no surprises shipped to you.
- Full Process Function Test. Before listing, the machine is tested across its operating process range. For this unit: Pulsed MIG, MIG, Flux-Cored, Stick, DC TIG. Arc quality, wire feed consistency (where applicable), voltage regulation, and safety functions are verified against Lincoln Electric factory acceptance criteria.
- Consumable & Maintenance Review. Contact tips, nozzles, liners, and drive rolls are inspected. Worn consumables are replaced with OEM-spec parts. Scheduled maintenance items are addressed if the machine's hours or condition indicate need.
- Final Acceptance & Listing. Only units that pass the full function test and meet WeldingMart's acceptance criteria are listed. The condition tag (Demo/Reconditioned) reflects the actual unit state — not a blanket "used" label.
- Shipping & Packaging. Units are packaged to prevent transit damage. Heavier machines ship on pallets with freight. Contact WeldingMart before purchase if you have specific delivery requirements.
The result: a Lincoln POWER MIG 262P that works as described, ships documented, and arrives ready to weld — not a gamble on a resale machine with unknown history.
Specifications based on Lincoln Electric factory documentation for the Lincoln POWER MIG 262P Pulsed MIG Welder. Used/demo units are verified to the same performance standards.
| Model | POWER MIG 262P |
| Manufacturer Code | K5378-1 |
| Output Amperage Range | 10–300A |
| Duty Cycle | 250A/27V/40% |
| Input Voltage | 208V / 230V |
| Phase | Single-phase |
| Wire Diameter Range | .023–.052 in |
| Welding Processes | Pulsed MIG (GMAW-P), MIG (GMAW), Flux-Cored (FCAW), Stick (SMAW), DC TIG (GTAW) |
| Pulse Capability | Yes — Pulsed MIG for aluminum, stainless, and low-spatter mild steel |
| Weight | 89 lbs |
| Warranty (New) | 3 Year Lincoln Electric |
View full specifications and current pricing on the new-version listing: View new Lincoln POWER MIG 262P →
The Lincoln POWER MIG 262P Pulsed MIG Welder is built for Pulsed MIG, MIG, Flux-Cored, Stick, DC TIG welding. Its 208V / 230V input, 10–300A output range, and 250A/27V/40% duty cycle make it the right tool for these applications:
Pulsed MIG is the standard process for aluminum MIG welding — reduced heat input prevents burn-through on thin aluminum, and the pulse cycle produces superior bead appearance with lower spatter. The 262P's pulsed capability makes it the right machine for aluminum boat work, marine fabrication, and automotive aluminum.
Pulsed MIG on stainless reduces heat input, minimizes distortion, and produces low-spatter welds with excellent bead appearance — critical for food-grade equipment, pharmaceutical fabrication, and architectural metalwork.
Five-process capability (Pulsed MIG + MIG + Flux-Cored + Stick + TIG) in a 300A machine with 40% duty cycle. For shops that weld a range of materials and need to optimize for quality and throughput on each material type.
Pulsed MIG provides the heat control needed for precision aluminum chassis components, roll cages, and structural members where distortion and aesthetics matter. The 262P gives motorsports fabricators a production-speed alternative to TIG on aluminum.
Maintenance welders who encounter steel, stainless, and aluminum repair scenarios in a single shift benefit from the 262P's five-process flexibility — one machine, optimized process for every material type.
Magnum PRO 300 welding gun, work cable, gas regulator/hose, operator manual. Contact WeldingMart to confirm exact configuration for this specific demo unit.
Note: Accessory kit contents on used and demo machines vary by unit. Contact WeldingMart before purchase to confirm the exact configuration of this specific unit. Additional accessories — guns, gas equipment, wire, carts — are available separately.
- WeldingMart operational verification documentation
- Operator manual (original or digital)
The Lincoln POWER MIG 262P Pulsed MIG Welder carries a 3 Year Lincoln Electric warranty when purchased new. For used and demo units, warranty status depends on the specific unit's age and prior registration history.
Every WeldingMart used/demo unit is backed by our operational verification and satisfaction commitment. If the machine doesn't perform as described upon arrival, contact WeldingMart immediately. We don't ship machines we haven't verified — and we stand behind what we ship.
Contact WeldingMart within 30 days of delivery for any performance concern. Our team will evaluate, troubleshoot, and resolve — whether that means service support, return authorization, or replacement. We prioritize resolution over process friction.
Used and demo inventory fluctuates. When this unit sells, it's gone until another unit completes verification. If you need a machine now without waiting for used availability, the new Lincoln POWER MIG 262P ships immediately: View new Lincoln POWER MIG 262P →
Is a used Lincoln POWER MIG 262P worth buying?
Yes — especially if you need pulsed MIG capability. The 262P is Lincoln's five-process single-phase machine with pulsed MIG, which is required for quality aluminum and stainless work. A demo unit from WeldingMart delivers this capability at a significant discount.
What makes the Lincoln POWER MIG 262P different from the 262MP?
The 262P adds Pulsed MIG (GMAW-P) capability to the same five-process platform as the 262MP. Pulsed MIG is specifically designed for aluminum, stainless, and low-spatter mild steel welding — lower heat input, better bead appearance, reduced distortion. If you weld aluminum or stainless, the 262P is the upgrade.
Can the Lincoln POWER MIG 262P weld aluminum?
Yes — pulsed MIG is the optimal process for aluminum MIG welding. You'll need a spool gun or push-pull gun for aluminum wire feeding. The 262P's pulsed output parameters are optimized for aluminum welding across a range of material thicknesses.
What is the duty cycle on the Lincoln POWER MIG 262P?
250A at 40% duty cycle (27V). Production-capable for job shop and fabrication environments — same duty cycle spec as the POWER MIG 260 and 262MP.
What voltage does the Lincoln POWER MIG 262P require?
208V or 230V single-phase. A dedicated 230V/50A circuit is required. Not a 120V or dual-voltage machine — designed for shop environments with proper electrical infrastructure.
What wire size does the Lincoln POWER MIG 262P accept?
.023–.052 in. The .023 in floor handles thin aluminum and stainless; .052 in ceiling handles heavy structural MIG passes. Full range coverage for the multi-material shop.
What does 'factory demo' mean for the Lincoln POWER MIG 262P?
This unit was used as a factory demonstration machine — minimal operational hours, maintained to factory spec throughout its demo service life. WeldingMart operationally verifies all demo units before listing. Factory demo units represent the top-value tier of the used/demo category.