What applications and base metals is the Harris Al-Braze EC Aluminum Brazing Flux - Half Pound Jar - ECDF1/2 suitable for?

Brazing flux is used with silver brazing alloys and some copper-phosphorus alloys when joining copper to dissimilar metals. Phos-copper alloys (BCuP series) are self-fluxing on copper-to-copper joints but still require flux when brazing copper to brass, bronze, or steel. Always use the flux recommended by the filler metal manufacturer for the specific alloy and temperature range.

How do I remove flux residue after using the Harris Al-Braze EC Aluminum Brazing Flux - Half Pound Jar - ECDF1/2?

All flux residue must be removed after completing the joint. For brazing and soldering, clean flux residue with warm water and a stiff brush immediately after the joint cools — flux becomes harder to remove as it ages. For SAW welding, remove slag and flux residue with a chipping hammer and wire brush between passes and after final welding. Confirm complete flux removal, especially in pressure vessel, pipe, and food-grade applications where residue can cause corrosion or contamination.

How should I store the Harris Al-Braze EC Aluminum Brazing Flux - Half Pound Jar - ECDF1/2?

Store flux in a sealed container in a cool, dry location. Moisture contamination degrades paste and powder fluxes — activated flux or flux that has absorbed moisture should be discarded and not used, as it can cause porosity or incomplete flux activation during the joining operation. Keep containers sealed between uses.

Harris Al-Braze EC Aluminum Brazing Flux - Half Pound Jar - ECDF1/2

Q: What is the Harris Al-Braze EC Aluminum Brazing Flux - Half Pound Jar - ECDF1/2 used for?

The Harris Al-Braze EC Aluminum Brazing Flux - Half Pound Jar - ECDF1/2 is a brazing flux that prevents oxidation on base metal and filler metal surfaces during torch brazing. Brazing flux is activated by heat — it liquefies at brazing temperature to coat the joint and exclude oxygen. Apply flux to all joint surfaces before heating. After brazing, remove all flux residue with warm water and a brush — brazing flux residue is corrosive and must be completely removed after the joint cools.

Q: How do I apply the Harris Al-Braze EC Aluminum Brazing Flux - Half Pound Jar - ECDF1/2 correctly?

Apply flux using an appropriate method for the process: brush application for soldering and brazing fluxes (cover all joint surfaces evenly), pre-placed granular flux feeding for SAW welding. Flux quantity matters — too little flux leaves bare areas that oxidize; too much flux can be difficult to remove after welding or brazing. Apply a thin, even coat to all contact surfaces.

SKU: ECDF1/2

$40.00

Factory Direct

Free Shipping over $250

Lowest Price

Al-Braze® EC Aluminum brazing Flux 1 ea. 1/2 lb. jar

Certification: AWS A 5.31 Class FB1 A;AMS 3412

Overview

Harris Al-Braze EC Aluminum Brazing Flux - ECDF1/2

Typical Application

Torch brazing aluminum;Brazing aluminum base materials such as 1100, 3003 and 6061..

Al-Braze EC is a brazing flux in powder form designed for torch brazing aluminum. Al-Braze EC is typically used to braze common aluminum base materials such as 1100, 3003 and 6061. It has a working temperature range of 915 - 1115oF. It is recommended for use with aluminum brazing filler metals 4047 (718) and 4145. Dry sprinkle this flux on the part or mix it with water or methyl, ethyl or isopropyl alcohol to form a paste. Remove flux after brazing.

Features

• Powdered flux for brazing aluminum alloys
• This flux can be used dry or mixed with water or alcohol to form a paste
• Typically used to braze common aluminum base materials such as 1100, 3003 and 6061
• Works well with aluminum brazing filler metals 4047 (718) and 4145
• Ideal for torch brazing aluminum
• Complies with the EU Reach & RoHS directive
•
•
•
•

Reviews

Q&A

Product Overview

Harris Al-Braze EC Aluminum Brazing Flux - ECDF1/2

Typical Application

Torch brazing aluminum;Brazing aluminum base materials such as 1100, 3003 and 6061..

Harris Al-Braze EC Aluminum Brazing Flux - Half Pound Jar - ECDF1/2

Typical Application

Features

Product Overview

Harris Al-Braze EC Aluminum Brazing Flux - ECDF1/2

Typical Application

Features

Product Reviews

Questions & Answers