How should I inspect and maintain the Harris 1630 Anti-Spatter & Nozzle Shield 16OZ (ORM-D) NO AIR - 016300D (Box of 12)?

Gas equipment accessories including torch tips, seats, and fittings should be inspected regularly: check tip orifices for enlargement, distortion, or blockage (clean with tip cleaners, not drill bits — oversized tip orifices are unsafe), inspect all threaded connections for cross-threading or galling, and verify O-rings and seals show no cracking or deformation. Leaking gas fittings are a fire hazard — replace immediately.

Harris 1630 Anti-Spatter & Nozzle Shield 16OZ (ORM-D) NO AIR - 016300D (Box of 12)

Q: What is the Harris 1630 Anti-Spatter & Nozzle Shield 16OZ (ORM-D) NO AIR - 016300D (Box of 12) used for?

The Harris 1630 Anti-Spatter & Nozzle Shield 16OZ (ORM-D) NO AIR - 016300D (Box of 12) is a Harris Products Group accessory designed for use with Harris torches, regulators, or cutting/brazing equipment. Harris Products Group manufactures a comprehensive line of gas equipment including torches, tips, regulators, hose assemblies, and specialty accessories for welding, cutting, brazing, and soldering operations.

Q: What Harris torch or equipment is the Harris 1630 Anti-Spatter & Nozzle Shield 16OZ (ORM-D) NO AIR - 016300D (Box of 12) compatible with?

Harris accessories are designed for compatibility with specific Harris torch handles, bodies, and tip seats. Before ordering replacement tips or fittings, verify the thread type and tip series match your torch model. Harris tip series identifiers (e.g., Model 18, 19, 23A) are included in the product title — match these to your existing torch handle designation.

Q: What fuel gases is the Harris 1630 Anti-Spatter & Nozzle Shield 16OZ (ORM-D) NO AIR - 016300D (Box of 12) rated for?

The Harris 1630 Anti-Spatter & Nozzle Shield 16OZ (ORM-D) NO AIR - 016300D (Box of 12) should only be used with fuel gases and pressures within its rated specifications. Harris gas equipment is rated for specific fuel gases (acetylene, propane, natural gas, MAP-Pro); using an accessory outside its rated fuel gas can cause dangerous flashback or equipment failure. Always verify the fuel gas compatibility listed in the product description or on the equipment label.

Q: What warranty does the Harris 1630 Anti-Spatter & Nozzle Shield 16OZ (ORM-D) NO AIR - 016300D (Box of 12) carry?

Harris Products Group accessories carry a limited warranty against manufacturing defects. Physical damage from misuse, over-pressure operation, or improper cleaning (e.g., using oversized tip cleaners that enlarge the tip orifice) is not covered. Contact WeldingMart.com with your order information for warranty service on any defective Harris accessory.

SKU: 016300D

$127.00 ~~$153.36~~

Factory Direct

Free Shipping over $250

Lowest Price

The Harris 1630 Anti-Spatter & Nozzle Shield is a professional-grade, non-aerosol protective solution designed for welding applications. This 16-ounce formula prevents spatter adhesion without requiring compressed air, enhancing welding efficiency and reducing equipment maintenance. Its silicon-free composition ensures clean welds while protecting nozzles, workpieces, and fixtures from spatter buildup. ORM-D classified for safe transport and handling.

Overview

Harris 1630 Anti-Spatter & Nozzle Shield 16OZ (ORM-D) NO AIR - 016300D

The Harris 1630 Anti-Spatter & Nozzle Shield is a professional-grade welding accessory designed to prevent weld spatter from adhering to welding nozzles, workpieces, and fixtures. This 16-ounce non-aerosol formula provides effective protection without compromising weld quality or requiring compressed air for application.

This specialized solution creates a protective barrier that prevents spatter buildup, reducing cleaning time and extending the life of welding equipment. The non-aerosol formulation makes it safer to store and transport while maintaining excellent coverage and protection.

Note: This product is classified as ORM-D (Other Regulated Materials for Domestic transport) and must be shipped according to applicable regulations.

Key features

Non-aerosol formula for safer handling and storage
Prevents spatter adhesion to welding surfaces and equipment
Extends nozzle life and reduces maintenance time
No compressed air required for application
Silicon-free formulation prevents weld contamination
Easy to apply and clean
Reduces post-weld cleanup time
16-ounce container for extended use

Applications

MIG/MAG welding nozzle protection
Workpiece spatter prevention
Fixture and jig protection
General welding spatter control

Technical specifications

Reviews

Q&A

Product Overview