Call to Talk With A Product Expert - 877-532-WELD (9353)

Cobot Welding Systems

Frequently Asked Questions

What is a cobot welding system and how is it different from a traditional welding robot?
A cobot (collaborative robot) is designed to work safely alongside human operators without hard safety fencing, using force-limiting technology and speed-and-separation monitoring. Lincoln Electric's Cooper® cobot systems—including the CRX-10iA/L (FANUC arm), GoFa-10 (ABB arm), and ADAPT platforms—bring the robot to the job rather than building a fixed workcell. Traditional industrial welding robots operate at full speed behind a safety fence and require extensive programming infrastructure; cobots are designed for faster deployment and easier programming, making them accessible to smaller fabricators.
What welding processes can Lincoln Electric cobot systems perform?
Lincoln Electric Cooper® cobots support MIG (GMAW), Pulsed MIG (GMAW-P), and Aluminum MIG welding depending on configuration. Available packages include Air-Cooled (A/C) and Water-Cooled (W/C) Weld Bundle options; the aluminum package (e.g., AD2610-3, AD2611-3) is specifically configured for aluminum wire feeding. Some packages ship as cart-mounted units (e.g., AD2610-1), while non-cart packages (e.g., AD2611-1) are for mounting to customer-supplied positioners or fixtures.
Do I need welding or robotics programming experience to operate a Lincoln Electric cobot?
Lincoln Electric designed the Cooper® cobot platform with ease-of-use as a priority. The systems use intuitive pendant-based programming with lead-through teaching—you physically guide the arm to positions and record them, rather than writing code. That said, some understanding of MIG welding parameters (wire feed speed, voltage, travel speed) is necessary to set up quality weld procedures. Lincoln Electric provides training through ClassMate® cobot training packages and on-site commissioning support.
What is the reach and payload of Lincoln Electric's cobot welding arms?
The Cooper® CRX-10iA/L (FANUC-based) and GoFa-10 (ABB-based) arms both target 10 kg payload class with a reach of approximately 1,250–1,418 mm (49–56 in) depending on the robot variant. This is sufficient for most small-to-medium weldment sizes in fabrication and light manufacturing. The ADAPT cobot (AD2650 series) is a newer configurable platform—check the specific spec sheet for reach and payload of that variant.
What is included in a Lincoln Electric cobot welding cart package versus a non-cart package?
Cart packages (e.g., AD2610-1, AD2501-6) include the cobot arm, Lincoln Electric welding power source, wire feeder, torch, and all interconnecting cables pre-mounted on a wheeled cart for fast repositioning around the shop floor. Non-cart packages (e.g., AD2611-1, AD2501-13) include all the same welding and robot components but without the cart, intended for customers who will mount the system to their own fixture, table, or overhead structure.
Is safety fencing required around a Lincoln Electric cobot welding system?
Cobots are designed to operate without hard safety guarding when running in reduced-speed collaborative mode, but arc welding introduces additional hazards—UV radiation, weld spatter, and fumes—that require area protection regardless of the robot's collision-avoidance features. At minimum, weld curtains or screens must be used to protect bystanders from arc flash. Consult the system's safety manual and your local jurisdiction's robot safety standards (ISO 10218-2, ANSI/RIA R15.06) before deployment.