Does the Harris 60/40 Leaded Rosin Core Solder .062" x 4 Oz Spool - 352837 require separate flux?

A separate flux must be applied to clean joint surfaces before soldering with wire or bar solder. Harris Bridgit Flux or a similar non-corrosive paste flux is recommended for plumbing copper joints. Apply flux to all contact surfaces, assemble the joint, then heat the base metal and touch solder to the joint — the solder flows by capillary action into the flux-wetted gap. Remove flux residue after the joint cools.

What is the correct soldering technique for the Harris 60/40 Leaded Rosin Core Solder .062" x 4 Oz Spool - 352837?

Soldering technique for copper plumbing: clean pipe and fitting surfaces with sandpaper or steel wool until bright, apply paste flux, assemble the joint, and heat the fitting (not the solder) with a torch until solder flows freely when touched to the joint. Remove heat as soon as the solder flows — overheating burns the flux and can cause a dry joint or oxidized solder. Allow to cool for 30 seconds before wiping and moving the assembly.

What diameter and quantity is the Harris 60/40 Leaded Rosin Core Solder .062" x 4 Oz Spool - 352837 available in?

Wire solder is sold in various diameters and spool weights. For residential plumbing, 1/8 in (3.2 mm) or 3/32 in (2.4 mm) wire on a 1 lb spool covers most common repairs. For production plumbing work, larger spools (5 lb, 25 lb) minimize changeover and reduce per-foot cost.

How should I store the Harris 60/40 Leaded Rosin Core Solder .062" x 4 Oz Spool - 352837?

Store solder in a cool, dry location away from moisture and chemical fumes. Lead-free solders containing silver (Sn-Ag, Sn-Ag-Cu) are more brittle than traditional tin-lead solders and should be handled with care to avoid cracking the wire on the spool. Flux-core solder should be stored away from extreme heat to prevent flux degradation inside the core.

1 3

Harris 60/40 Leaded Rosin Core Solder .062" x 4 Oz Spool - 352837

Q: What is the Harris 60/40 Leaded Rosin Core Solder .062" x 4 Oz Spool - 352837 used for?

Solder is used for joining metal components at temperatures below 840°F (450°C) in plumbing, electronics, and light metal fabrication. Select the solder based on your application: lead-free is required for potable water plumbing; tin-lead solders are still used in electronics repair and non-potable applications where permitted by code.

SKU: 352837

$56.40

Factory Direct

Free Shipping over $250

Lowest Price

60/40 leaded solid wire solder 0.062 in. x 4 ea. 4 oz. spool on blister card

Overview

60/40 tin-lead solid wire solder, with some exceptions, can be used to join copper and most copper alloys, lead, nickel alloys and steel. Tin-lead solders are not recommended for joints subject to high stress or vibration in the cooling industry due to lack of sufficient elongation properties. Similar to 50/50 but flows faster due to its narrow melting range. Lead bearing solders are not to be used in potable water system applications.

Features

Joins copper and most copper alloys, lead, nickel alloys and steel, with some exceptions
Generally used for small connections due to the limited amount of flux available
Rosin-core base eliminates the need for manual flux application
Popular choice for soldering electrical and electronic connections
Heat sources include soldering guns, irons and air-fuel torches
Not recommended for joints subject to high stress or vibration in the cooling industry due to lack of sufficient elongation properties
Not for use with plumbing and potable water system applications
Meets ASTM B-32 Specification;Alloy Grade Sn 60 Type WRAP-2;J-STD-006 Sn60Pb40Sb0.4 – Flux ROL1

Reviews

Q&A

Product Overview

Features

Joins copper and most copper alloys, lead, nickel alloys and steel, with some exceptions
Generally used for small connections due to the limited amount of flux available
Rosin-core base eliminates the need for manual flux application
Popular choice for soldering electrical and electronic connections
Heat sources include soldering guns, irons and air-fuel torches
Not recommended for joints subject to high stress or vibration in the cooling industry due to lack of sufficient elongation properties
Not for use with plumbing and potable water system applications
Meets ASTM B-32 Specification;Alloy Grade Sn 60 Type WRAP-2;J-STD-006 Sn60Pb40Sb0.4 – Flux ROL1

Harris 60/40 Leaded Rosin Core Solder .062" x 4 Oz Spool - 352837

Product Overview

Features

Product Reviews

Questions & Answers