What is the correct technique for brazing with the Harris Aluxcor 4047 F15.1 Aluminum Brazing Rod .084 X 20in (1/2 lb Tube) 10 Tubes Total - A4047CWA08420L?

Proper joint preparation is critical for sound brazed joints: clean all joint surfaces to remove oil, oxide, and scale using emery cloth or a wire brush. Maintain proper joint clearance for capillary flow. Heat the base metal — not the filler rod — to brazing temperature before touching the rod to the joint. The heat-to-flow sequence ensures proper capillary action. Allow the joint to air cool before quenching to avoid thermal shock cracking.

Call to Talk With A Product Expert - 877-532-WELD (9353)

Harris Aluxcor 4047 F15.1 Aluminum Brazing Rod .084 X 20in (1/2 lb Tube) 10 Tubes Total - A4047CWA08420L

Q: What is the Harris Aluxcor 4047 F15.1 Aluminum Brazing Rod .084 X 20in (1/2 lb Tube) 10 Tubes Total - A4047CWA08420L used for?

The Harris Aluxcor 4047 F15.1 Aluminum Brazing Rod .084 X 20in (1/2 lb Tube) 10 Tubes Total - A4047CWA08420L is a brazing filler metal used in torch brazing, induction brazing, and furnace brazing applications. Brazing produces strong, leak-tight joints on a wide range of base metals at temperatures above 840°F (450°C) but below the base metal's melting point. Select the filler alloy based on base metal type, service temperature, and required joint strength.

Q: What diameter is the Harris Aluxcor 4047 F15.1 Aluminum Brazing Rod .084 X 20in (1/2 lb Tube) 10 Tubes Total - A4047CWA08420L available in?

Brazing rod diameter selection depends on joint gap and application method. For torch brazing, 1/16 in and 3/32 in rod diameters are most common for HVAC/R copper tube joints. Larger diameter rods (1/8 in+) suit bigger joints and higher-production fill requirements. The filler should flow into the joint by capillary action — correct joint clearance (typically 0.001–0.005 in for tight-fit joints) is more important than rod size for capillary flow.

Q: Does the Harris Aluxcor 4047 F15.1 Aluminum Brazing Rod .084 X 20in (1/2 lb Tube) 10 Tubes Total - A4047CWA08420L require brazing flux?

A compatible brazing flux is required for most brazing operations to prevent oxidation on base metal and filler surfaces during heating. Apply flux to joint surfaces before heating. After brazing, remove all flux residue with warm water and a brush — flux residue is corrosive and will attack the joint over time if not cleaned.

Q: What package size is the Harris Aluxcor 4047 F15.1 Aluminum Brazing Rod .084 X 20in (1/2 lb Tube) 10 Tubes Total - A4047CWA08420L available in, and how should I store it?

Brazing alloys are sold in various rod lengths and weights — common sizes include 1 lb, 5 lb, and 25 lb packages. Store in a dry location free from oil and solvent contamination. Silver brazing alloys are stable at room temperature and do not require special controlled-atmosphere storage. Keep surfaces clean to ensure proper flux adhesion and capillary flow.

SKU: A4047CWA08420L

$947.00

Financing Options

•

Loading Affirm Estimate…

•

Lease-To-Own From $43/mo — 24-Mo Term, No Hard Credit Check

Factory Direct

Free Shipping

Lowest Price

Visit our support center

Expert help & advice
Check your order status

Updates & Tracking
Returns & exchanges

All you need to know
Why WeldingMart.com

Our Promise To You