Is this the same electrode as the parent Lincoln Nic-L-Weld 55 Nickel Alloy grade, just in a different package?

Yes. SKU NLW5960 is the same AWS A5.15 ENiFe-CI classification as every other size in the Lincoln Nic-L-Weld 55 Nickel Alloy family. The only difference is diameter (1/8 in) and package format (10 lb tube). Polarity, position, and tensile properties are identical to the parent grade.

How many rods are in this 10 lb tube?

Approximately ~50 rods. Exact count varies with manufacturing tolerance but a 10 lb tube of 1/8 in Lincoln Nic-L-Weld 55 Nickel Alloy typically contains in this range.

What is the shelf life if I do not use them all?

Sealed containers store indefinitely in a dry environment. Once opened, store in a dry location; nickel cast-iron electrodes are less hydrogen-sensitive than low-hydrogen carbon steel rods but should be kept dry to avoid porosity from moisture in the coating.

What diameter should I use for common applications?

1/8 in is well-suited for general all-position stainless fabrication and pipe. Heavier base metal and higher deposition typically calls for one diameter up; thinner sheet and root passes go one diameter down. See the parent grade page for full diameter-to-amperage guidance.

Can I mix this size with other diameters on the same job?

Yes, provided your procedure qualification (WPS) covers the diameter range. Many shops use one diameter for root, one for fill, and one for cap. All sizes within Lincoln Nic-L-Weld 55 Nickel Alloy share identical mechanical properties (AWS A5.15 ENiFe-CI) so weld metal chemistry is consistent across passes.

Do I need to rebake these after the can is opened?

Refer to the parent grade page and manufacturer data sheet for rebake requirements specific to this electrode classification.

Does this size require a special holder or stinger?

Use an electrode holder rated for the amperage range above (70-120 A). Most general-purpose stinger holders (e.g. 300-500 A class) handle 1/8 in Lincoln Nic-L-Weld 55 Nickel Alloy without issue. For sustained high-amperage runs on larger diameters, a 500 A or higher holder is recommended.

Is this Buy America compliant?

This specific SKU is not the Buy America variant. Lincoln Nic-L-Weld 55 Nickel Alloy may be available in a Buy America compliant version - see the parent grade page for all available compliance variants.

Harris Nic-L-Weld 59 Nickel Alloy Stick 1/8 in. (3.2 mm) - 10 lb Tube - NLW5960

SKU: NLW5960

$500.40

Package Size

Financing Options

•

As low as …/mo with.

•

Loading Affirm Estimate…

Harris Authorized Dealer

Free Shipping

Lowest Price

Nic-L-Weld™ 59 nickel alloy stick (SMAW) welding rod1/8 x 14 in. x 10 lb. tube/box

Overview

Nic-L-Weld™ 59 is a general purpose, nickel-iron alloy electrode for production, salvage and repair of all cast iron. It is suited for joining, filling and build-up of gray and cast irons. It can be used for fabrication and repair of pump housings, valves, castings, cast and malleable fittings, Deposits are machinable and have high strength.

Features

General purpose nickel-iron electrode for cast irons
Good machinability
Close color match to cast iron
70,000 psi maximum tensile strength (as welded)
pre-heat heavy castings to approximately 400 degrees F (204 degrees C) for best results
AC or DC reverse polarity
Used for production, salvage and repair of cast irons
Conforms to AWS A5.15, ENiFeCl

Downloads

NIC L WELD 59 Electrode.pdf

Reviews

Q&A

Product Overview

Features

General purpose nickel-iron electrode for cast irons
Good machinability
Close color match to cast iron
70,000 psi maximum tensile strength (as welded)
pre-heat heavy castings to approximately 400 degrees F (204 degrees C) for best results
AC or DC reverse polarity
Used for production, salvage and repair of cast irons
Conforms to AWS A5.15, ENiFeCl

Harris Nic-L-Weld 59 Nickel Alloy Stick 1/8 in. (3.2 mm) - 10 lb Tube - NLW5960

Product Overview

Features

Downloads

Product Reviews

Questions & Answers

Mettle by WeldingMart