What process is the Lincoln Electric Cormet 1 Corm1 12N designed for?

The Lincoln Electric Cormet 1 Corm1 12N is used in Submerged Arc Welding (SAW), a high-deposition welding process where the arc is shielded by a blanket of granular flux rather than shielding gas. SAW is used primarily in the flat and horizontal positions for welding structural plate, pressure vessels, pipelines, ship hulls, and heavy fabrication. It produces deep penetration, high deposition rates, and excellent weld quality with minimal spatter.

What is the AWS classification of the Lincoln Electric Cormet 1 Corm1 12N?

The Lincoln Electric Cormet 1 Corm1 12N carries AWS E81T1-B2C/M-H4 classification. In SAW, the wire/flux combination determines the weld deposit chemistry and mechanical properties — the wire class and flux class are always specified together. Always verify the flux is approved for use with this wire in your Welding Procedure Specification (WPS).

What diameter is the Lincoln Electric Cormet 1 Corm1 12N available in?

Common SAW wire diameters range from 5/64 in to 7/32 in. Smaller diameter wire (5/64, 3/32 in) suits lower heat-input applications, tight-groove work, and thinner plate. Larger diameter wire (5/32, 3/16, 7/32 in) maximizes deposition rate for heavy plate and multi-pass structural welds. Consult the wire manufacturer's parameter chart for amperage, voltage, and travel speed by diameter.

What spool or coil size is the Lincoln Electric Cormet 1 Corm1 12N available in?

SAW wire is supplied in various coil weights from 25 lb coils to 600 lb reels, depending on the wire diameter and supplier. Heavy production SAW systems use large coils (300–600 lb) to minimize wire change-over time. Ensure your SAW wire feeder head is configured for the specific coil diameter and weight of the product ordered.

How should I store the Lincoln Electric Cormet 1 Corm1 12N to maintain weld quality?

Store SAW wire in a clean, dry environment. Surface rust on SAW wire can introduce hydrogen into the weld deposit, increasing the risk of porosity and cold cracking in susceptible base materials. Lightly rusted wire can sometimes be cleaned with a dry cloth, but wire with heavy surface oxidation should be discarded. Keep wire coils sealed in their original packaging until ready for use and store at controlled room temperature with low humidity.

Lincoln Electric Cormet 1 Corm1 12N

SKU: CORM1-12N

$187.97 ~~$195.36~~

Lincoln Elite Dealer

Free Shipping over $250

Lowest Price

Cormet™ 1 (0.047 in, 16 kg spool) is an all-position, B2 alloyed steel FCAW-G wire designed for prolonged elevated temperature service up to 550°C (1022°F) and high strength and improved corrosion resistance. Cormet 1 meets AWS A5.29 E81T1-B2C/M-H4.

AWS / Classification: E81T1-B2C/M-H4

Overview

Lincoln CORM1-12N Cormet 1

Cormet 1 is a low alloy, all position gas-shielded flux-cored wire that is designed for strength and resistance to corrosion and prolonged elevated temperature service.

Features

• B2 alloyed steel: 1.25% chromium, 0.5% molybdenum alloyed steel for prolonged elevated temperature service up to 550°C (1022°F)
• Designed for high strength and improved corrosion resistance in refineries to sulphur bearing crude oil at 250-450°C (482-842°F)

Reviews

Q&A

Product Overview

Lincoln CORM1-12N Cormet 1

Cormet 1 is a low alloy, all position gas-shielded flux-cored wire that is designed for strength and resistance to corrosion and prolonged elevated temperature service.

Lincoln Electric Cormet 1 Corm1 12N

Features

Product Overview

Lincoln CORM1-12N Cormet 1

Features

Product Reviews

Questions & Answers