The Ranger 260MPX engine driven welder/generator excels on the job. The unit's industry-leading design makes it smaller, lighter and quieter than other machines in its class, while an intuitive user interface with advanced technology helps simplify operation and improve arc control. You can also count on a reliable source of clean generator power to run a variety of tools and sensitive equipment. Check out the features below:
The Ranger 260MPX sets a new standard for engine-driven welder/generators with its industry-leading design that offers significant advantages over competitive machines in its class. This innovative unit is up to 20% smaller, providing more space for additional tools and equipment on crowded job sites or service trucks. At up to 25% lighter than comparable machines, it offers enhanced maneuverability around job sites, reducing operator fatigue during transportation and setup. Perhaps most impressively, the Ranger 260MPX operates at up to 60% quieter than similar units, dramatically reducing noise levels to help enhance safety, improve communication, and create a more comfortable working environment for operators and nearby personnel.
The Ranger 260MPX combines an innovative user interface with advanced technology to deliver superior welding performance and operational simplicity. The easy-to-read digital screen with intuitive push-and-turn controls makes parameter adjustment quick and straightforward. Ready.Set.Weld technology simplifies setup by providing recommended settings for various applications, helping operators of all skill levels achieve optimal results. Chopper Technology enhances arc control for improved weld quality, while CrossLinc remote technology enables convenient arc adjustments directly at the weld location, eliminating trips back to the power source. The unit also features maintenance alerts that keep operators informed when service is needed, helping to maximize uptime and extend equipment life. With 9.5kW of clean AC generator power that delivers just 5% Total Harmonic Distortion, the Ranger 260MPX can safely power sensitive electronics like laptops and diagnostic equipment without concern. Operators can simultaneously run generator power and weld without interruption, making this versatile machine an ideal solution for construction sites, maintenance operations, and field repairs where both welding capability and reliable power generation are essential requirements.
- Compact Size - Up to 20% smaller than other machines in its class
- Low Decibel Rating - Up to 60% quieter for enhanced safety and comfort
- Easy-to-Use Digital User Interface with Ready.Set.Weld technology
- Clean AC Generator Power with 5% Total Harmonic Distortion
| Dimensions (H x W x D) | 26 in x 20 in x 36 in (660 mm x 508 mm x 914 mm) |
| Net Weight | 446 lbs (202 kg) |
| Machines Processes | Stick (SMAW) TIG (GTAW) MIG (GMAW) Flux-Cored Self-Shielded (FCAW-S) Flux-Cored Gas-Shielded (FCAW-G) |
| IEC Rating | 231A / 29.2V / 100% @ 104°F (40°C) |
| Output Range by Mode | CC-Stick: 35–260 Amps, Touch Start TIG: 20 – 250 Amps, CV-Wire: 14 – 28 Volts |
| Single Phase Auxiliary Output | 9,500 Watts Continuous, 120/240V |
| Auxiliary Output Frequency | 60 Hz |
| Receptacle Types | NEMA 5-20R NEMA 6-50R NEMA 14-50R |
| Engine Brand & Model | Kohler OHV Command CH730 |
| Engine Description | 2 Cylinder Air-Cooled Gasoline Engine |
| Engine Horsepower | 23.5 HP |
| High Idle Operating Speed @ Rated Output | 3600 |
| Fuel Tank Size (US gal.) | 11 |
| Fuel Tank Size (L) | 41.6 |
| Oil Capacity (qts.) | 2.0 |
| Oil Capacity (L) | 1.9 |
| Typical Application | Construction Construction & Field Erection General Fabrication Maintenance & Repair Repair Welding Structural Fabrication Structural Welding |
| Warranty | 3 Years Parts and Labor - Engine warranted separately by engine manufacturer |
The Ranger 260MPX supports Stick (SMAW) and TIG (GTAW) welding as standard processes. Many engine-driven models in this family also support MIG (GMAW) and flux-core (FCAW) welding when paired with an optional wire feeder. Check the spec sheet for the exact output range and recommended wire feeder compatibility.
Yes. Lincoln Electric engine-driven welders in this class include AC generator power — typically 120V and 240V auxiliary power outlets — making them ideal for jobsite use where power tools, lights, or other equipment need to run alongside welding operations. Refer to the spec sheet for exact generator wattage.
Lincoln engine drives in this class are available with Kohler, Kubota, or Perkins diesel/gasoline engines depending on the specific model variant. The engine brand and displacement is listed on the product label and in the owner's manual. Contact WeldingMart if you need to confirm the exact engine for a specific unit.
Duty cycle varies by amperage setting. At maximum rated output the duty cycle is typically 100% — engine drives are designed for continuous, all-day operation in demanding field environments. Refer to the spec sheet for the duty cycle curve at specific amperage levels.
Yes — this is a factory demo or low-hour unit directly from Lincoln Electric. Units may show light cosmetic marks from display use but are mechanically sound. Each unit includes any applicable remaining Lincoln Electric warranty. Contact WeldingMart for warranty status on the specific unit number.
Factory demo engine drives typically include the base machine and standard accessories as specified by Lincoln Electric. Consumables (electrodes, gas cylinders) are not included. See the product listing details or contact WeldingMart to confirm what is included with your specific unit.