When you're in the cross-country pipeline welding business, your results are only as good as the arc quality, reliability, and portability of your equipment. The Cross Country 300 engine-driven welder gives you all three of these and more. The Cross Country 300 keeps the operation simple with intuitive constant current (CC), constant voltage (CV), and TIG mode control. This enables the user to easily change over from stick to wire to TIG welding processes. But sometimes a worker in the field needs more than just a welder. The Cross Country 300 gives you plenty of single and three phase AC generator power for grinders, pumps and trailers. It all comes in a compact, lightweight package that will fit into any truck bed and give you plenty of visibility through the rear window.
The Cross Country 300 is engineered specifically for pipeline applications where arc quality is paramount. Out on the pipeline spread, your job depends on whether each and every weld passes inspection. The Cross Country 300 stick arc was tuned by pipeline welders for pipeline welders, resulting in excellent puddle performance for root, fill, and cap passes with both cellulosic and low hydrogen stick electrodes. This specialized arc tuning helps ensure consistent weld quality in challenging field conditions, reducing the likelihood of costly rework or failed inspections. The dual continuous controls designed specifically for pipeline welding allow operators to precisely tune the arc for the pipe, pass, position, and environmental conditions, providing the flexibility needed to achieve optimal results across a variety of welding scenarios.
Designed with the mobile pipeline welder in mind, the Cross Country 300 features the most compact footprint in its class, easily fitting on most trucks while maintaining excellent visibility through the rear window. The lower weight reduces strain on truck suspensions during cross-country travel to remote job sites. The powder-coated steel enclosure and polished stainless steel exhaust stack not only look professional but also stand up to years of harsh field conditions and travel. For enhanced durability and utility, the unit includes a heavy-duty stainless steel case and rugged wired or wireless remotes. Maintenance is simplified with sliding engine access doors on each side of the machine, allowing for easy service even while mounted on a truck. Conveniently located battery jumper studs and digital meters with dashboard gauges for monitoring key functions further enhance the user experience. With flexible process capabilities including DC stick, wire, and TIG welding, plus easy connection to Lincoln Electric wire feeders, the Cross Country 300 adapts to changing project requirements. The powerful generator produces up to 11kW continuous three-phase power for tools, equipment, and travel trailers. Standard equipment includes an engine block heater for reliable operation in cold weather environments, making the Cross Country 300 a truly versatile solution for pipeline professionals working in diverse and challenging conditions.
- It's All About the Arc – Stick arc tuned by pipeline welders for pipeline welders with excellent puddle performance
- The Size is Right – Most compact engine-driven pipe welder in its class with great visibility through truck's rear window
- Easy To Use – Dual continuous controls designed for pipeline welding with simple service access
- Flexible – Supports DC stick, wire and TIG processes with up to 11kW continuous three phase power
| Dimensions (H x W x D) | 31.9 in x 25.3 in x 56.0 in (810 mm x 643 mm x 1422 mm) |
| Net Weight | 1034 lbs (469 kg) |
| Machines Processes | Stick (SMAW) Gouging (CAC-A) TIG (GTAW) MIG (GMAW) Flux-Cored Self-Shielded (FCAW-S) Flux-Cored Gas-Shielded (FCAW-G) |
| Open Circuit Voltage | 80 Peak OCV @ 1800 RPM |
| IEC Rating | 300A / 32V / 100% @ 104°F (40°C) |
| Output Range by Mode | Stick: 40 – 300 Amps, Touch Start TIG: 20 – 250 Amps, CV-Wire: 14 – 32 Volts |
| Rated Gouging Carbon Diameter | 1/4 in (6.5 mm) |
| Single Phase Auxiliary Output | 10,000 Watts Continuous, 120/240V |
| Three Phase Auxiliary Output | 11,000 Watts Continuous, 240V |
| Auxiliary Output Frequency | 60 Hz |
| Receptacle Types | NEMA 5-20R NEMA 14-50R NEMA 15-50R |
| Engine Brand & Model | Kubota V1505 |
| Engine Description | 4 Cylinder Naturally Aspirated Water Cooled Diesel Engine |
| Engine Horsepower | 22.0 hp (16.4 kW) |
| Engine Block Size & Displacement | 91.4 cu. in (1.5 L), Bore x Stroke - 3.07 in x 3.09 in (78 mm x 78 mm) |
| Emissions Rating | US EPA Tier 4 Final |
| High Idle Operating Speed @ Rated Output | 1800 |
| Low Idle Operating Speed | 1350 |
| Fuel Tank Size (US gal.) | 11.6 US gal. |
| Fuel Tank Size (L) | 44 L |
| Oil Capacity (qts.) | 6.4 qts. |
| Oil Capacity (L) | 6.0 L |
| Coolant Capacity (US gal.) | 1.2 US gal. |
| Coolant Capacity (L) | 4.5 L |
| Typical Application | Construction Cross Country Pipeline Construction & Field Erection High-strength Pipe Maintenance & Repair Oil & Gas Pipeline & Offshore Piping Power Generation Structural Fabrication |
| Warranty | 3 Years Parts and Labor - Engine warranted separately by engine manufacturer |
Lincoln lists the welding processes for the Cross Country 300 as: Stick, Flux-Cored, MIG, TIG. Lincoln also publishes a dedicated DC Pipe welding mode on this machine. Source: Lincoln spec sheet E6.170.
Yes. Lincoln publishes the auxiliary AC generator output for the Cross Country 300 as: Single Phase: 10kW Continuous; 11,500 Watts Peak / 10,000 Watts Continuous AC Power 1-Phase; Three Phase: 11 kW Continuous; 12,500 Watts Peak / 11,000 Watts Continuous AC Power 3-Phase (60 Hz (single phase AC output will operate either 60 Hz or 50/60Hz power tools)). Lincoln publishes these receptacles for this machine:
- Two 120V Duplex Receptacles w/ Sealed GFCI Modules — 120V, 20A Per Duplex, 40A Total, NEMA type not stated by Lincoln
- 1-Phase Full KVA Receptacle — 120/240V, 42A@240V; 42A@120V Each Branch Circuit, NEMA type not stated by Lincoln
- 3-Phase Full KVA Receptacle — 240V, 27A@240V, NEMA type not stated by Lincoln
Source: Lincoln spec sheet E6.170.
The Cross Country 300 on this listing is powered by a Kubota V1505, 4-cylinder water-cooled diesel engine, 22 HP @ 1800 RPM. Kubota engines in this line are diesel only. Source: Lincoln spec sheet E6.170.
Duty cycle varies by output setting. Lincoln publishes 100% duty cycle at every rated output on the Cross Country 300, including its highest published point of 350 A / 28 V in DC CV; for maximum rating Lincoln instructs derating 2 volts for every 18°F (10°C) above 104°F (40°C).
| Welding process / output mode | Rating basis | Amperes | Volts | Duty cycle | As printed by Lincoln |
|---|---|---|---|---|---|
| DC Pipe Current | NOT LABELLED (Rated DC Output column) | 300A | 32V | 100% | DC Pipe Current: 300A/32V/100% |
| DC Touch Start TIG | NOT LABELLED (Rated DC Output column) | 250A | 30V | 100% | DC Touch Start TIG 250A/30V/100% |
| DC Constant Voltage | NOT LABELLED (Rated CV Output column) | 300A | 32V | 100% | 300A/32V/100% |
| DC Constant Voltage | NOT LABELLED (Rated CV Output column) | 350A | 28V | 100% | 350A/28V/100% |
| Mode / parameter | Range |
|---|---|
| DC Pipe Current | 40-300 AMPS |
| DC Touch Start TIG | 20-250 Amps |
| DC Constant Voltage | 14-32 Volts Single Dial Continuous Control |
| DC CC-Stick range | NOT STATED |
| Open circuit voltage | NOT STATED |
| Rated ambient temperature | Derating footnote only: "High Temperature: For maximum rating, derate 2 volts for every 18°F (10°C) above 104°F (40°C)." No "all rated outputs at 104°F" statement. |
| Specification | As printed by Lincoln |
|---|---|
| Peak / surge output | 3-Phase: 12,500 Watts Peak; 1-Phase: 11,500 Watts Peak |
| Continuous output | 3-Phase: 11,000 Watts Continuous; 1-Phase: 10,000 Watts Continuous |
| Single-phase | Single Phase: 10kW Continuous; 11,500 Watts Peak / 10,000 Watts Continuous AC Power 1-Phase |
| Three-phase | Three Phase: 11 kW Continuous; 12,500 Watts Peak / 11,000 Watts Continuous AC Power 3-Phase |
| Frequency / phase | 60 Hz (single phase AC output will operate either 60 Hz or 50/60Hz power tools) |
| Receptacle | Voltage | Amperage | NEMA type |
|---|---|---|---|
| Two 120V Duplex Receptacles w/ Sealed GFCI Modules | 120V | 20A Per Duplex, 40A Total | NOT STATED |
| 1-Phase Full KVA Receptacle | 120/240V | 42A@240V; 42A@120V Each Branch Circuit | NOT STATED |
| 3-Phase Full KVA Receptacle | 240V | 27A@240V | NOT STATED |
Source: Lincoln Electric publication E6.170 (Issue Date 03/16) — view the Lincoln spec sheet PDF. Figures are Lincoln's own; “NOT STATED” means Lincoln does not publish that value for this machine.
Yes — this is a factory demo or low-hour unit directly from Lincoln Electric. Units may show light cosmetic marks from display use but are mechanically sound. The warranty on this unit is the same as on a new machine. Lincoln’s Industrial Limited Warranty (form IMWS1, Apr-2026) lists a 3-year warranty period for “All Lincoln welding machines, wirefeeders & plasma cutting machines”, and Lincoln states: “Lincoln will assume both the parts and labor expense of correcting defects during the warranty period.” As on a new machine, the engine is not covered by Lincoln’s warranty — Lincoln states: “All engines and engine accessories are warranted by the engine or engine accessory manufacturer and are not covered by this warranty.” This machine’s Kubota V1505 engine is warranted by Kubota: “USA - 2 Year/2000 Hours and 3rd Year Major Components.”, and that term “BEGINS ON DATE OF PURCHASE BY END USER.” Lincoln directs buyers to the engine maker — WWW.KUBOTAENGINE.COM. See Lincoln Engine Drive Motors Warranty Contacts. Source: Lincoln Electric Industrial Limited Warranty (form IMWS1, Apr-2026).
Lincoln’s own included-items list for K4166-1 is: Machine Only (Lincoln K4166-1). This factory demo unit is supplied the same way. Not included: welding leads (electrode and work cable), electrode holder, work clamp, and accessory kits. No printed operator’s manual, WeldingMart demo-prep certification document or Lincoln warranty registration paperwork ships with the machine. Consumables (electrodes, gas cylinders) are not included. Leads, holders, clamps, cable connectors, undercarriages, spark arrestors, remote controls and wire feeders are sold separately — contact WeldingMart and we will quote the exact set you need.