What wire diameter is the Lincoln Lincore BU Flux-Cored (FCAW-S) Welding Wire available in?

The Lincoln Lincore BU Flux-Cored (FCAW-S) Welding Wire is available in 5/64 diameter. Wire diameter selection depends on base metal thickness and travel speed requirements: .023 in suits thin sheet metal (up to 3/16 in), .030 in is versatile for 1/8–1/4 in, .035 in is the most common all-purpose diameter for 3/16–1/2 in steel, and .045 in or larger suits heavy plate and high-deposition applications.

What shielding gas or flux type does the Lincoln Lincore BU Flux-Cored (FCAW-S) Welding Wire require?

The Lincoln Lincore BU Flux-Cored (FCAW-S) Welding Wire is a flux-cored wire. Flux-core wire comes in two types: FCAW-G (gas-shielded, dual-shield) requires external shielding gas (typically 75% Ar/25% CO2 or 100% CO2) for full protection; FCAW-S (self-shielded, innershield) generates its own shielding from the flux core and requires no external gas. Check the AWS classification on the package to confirm which type this is.

What is the deposit strength of the Lincoln Lincore BU Flux-Cored (FCAW-S) Welding Wire?

Deposit tensile strength for mild steel solid MIG wire (ER70S-x) is approximately 70,000 PSI (483 MPa) minimum. For stainless filler metals, the deposit strength matches the base alloy grade. For flux-core wires, strength and chemistry vary by classification — refer to the AWS classification on the package for the exact mechanical property requirements.

What spool size is the Lincoln Lincore BU Flux-Cored (FCAW-S) Welding Wire available in?

The Lincoln Lincore BU Flux-Cored (FCAW-S) Welding Wire is available in 50 lb, 25 lb spool/coil sizes. Smaller spools (2 lb, 10 lb) fit most hobby and light commercial feeders. Larger spools (33 lb, 44 lb) are standard for production welders with 12 in spool capacity. Drums and coils (250–600 lb) are used with bulk drum feeders for robotic and high-production applications.

How should I store the Lincoln Lincore BU Flux-Cored (FCAW-S) Welding Wire to prevent weld quality issues?

Store MIG wire in a clean, dry location away from humidity. Moisture absorption causes porosity in the weld — mild steel wire is particularly susceptible. If wire has been exposed to moisture, it may show surface rust; lightly rusted wire can sometimes be used but should be wiped before feeding. Flux-core and low-hydrogen electrodes require stricter moisture control than solid wire. Keep spools in their original packaging or sealed containers with desiccant packets when not in use.

1 3

Lincoln Electric Lincore Flux-Core Wire 5/64"

SKU: ED022064

$457.65 ~~$508.50~~

Package Size

Lincoln Elite Dealer

Free Shipping over $250

Lowest Price

Overview

LINCORE® BU 5/64 inch welding wire provides a tough machinable deposit for build-up or final overlay. Ideal for rebuilding worn parts to near final dimensions before applying final hardfacing layers which are more wear resistant. Can also be used as the final hardfacing layer for non-severe metal-to-metal wear applications with unlimited deposit layers.

Features

Provides a tough machinable deposit for build-up or final overlay
Delivers non-severe metal-to-metal wear resistance with outstanding crack resistance
Ideal for rebuilding worn parts to near final dimensions before applying final hardfacing layers which are more wear resistant
Can also be used as the final hardfacing layer for non-severe metal-to-metal wear applications

Typical Applications

Cable sheaves
Crane wheels
Drums and pulleys

Welding Positions

Flat and Horizontal positions only

Shielding Gas

75% Argon / 25% CO₂

Downloads

Lincore BU Product Info

Reviews

Q&A

Product Overview

Features

Provides a tough machinable deposit for build-up or final overlay
Delivers non-severe metal-to-metal wear resistance with outstanding crack resistance
Ideal for rebuilding worn parts to near final dimensions before applying final hardfacing layers which are more wear resistant
Can also be used as the final hardfacing layer for non-severe metal-to-metal wear applications