What wire diameter is the Lincoln Metalshield MC-706 Metal-Cored GMAW-C Welding Wire available in?

Wire diameter selection is critical for matching deposition rate to base metal thickness. For mild steel MIG wire: .023 in for thin sheet (up to 3/16 in), .030 in for general fabrication, .035 in for the widest range of thicknesses, and .045 in+ for heavy plate. Check the product listing for available diameters of the Lincoln Metalshield MC-706 Metal-Cored GMAW-C Welding Wire.

What shielding gas or flux type does the Lincoln Metalshield MC-706 Metal-Cored GMAW-C Welding Wire require?

Shielding gas selection affects arc stability, spatter, bead profile, and penetration: 100% CO2 gives deep penetration and good bead wetting but more spatter; 75% Ar/25% CO2 (C25) is the most popular general-purpose mix, balancing penetration, spatter, and bead appearance; higher argon mixes (90/10, 95/5) suit spray transfer at higher amperages. Match shielding gas to your wire alloy and welding parameters.

What is the deposit strength of the Lincoln Metalshield MC-706 Metal-Cored GMAW-C Welding Wire?

For E70C-6M H4: Deposit tensile strength for mild steel solid MIG wire (ER70S-x) is approximately 70,000 PSI (483 MPa) minimum. For stainless filler metals, the deposit strength matches the base alloy grade. For flux-core wires, strength and chemistry vary by classification — refer to the AWS classification on the package for the exact mechanical property requirements.

Call to Talk With A Product Expert - 877-532-WELD (9353)

1 2

Lincoln Metalshield MC-706 Metal-Cored GMAW-C Welding Wire

Q: What spool size is the Lincoln Metalshield MC-706 Metal-Cored GMAW-C Welding Wire available in?

MIG wire spool sizes range from 2 lb (small hobbyist spools) to 600 lb bulk drums. Most production feeders accept 12 in (33–44 lb) spools. Check your wire feeder's spool capacity before ordering — some compact machines only accept 4 in (10 lb) spools. Using the largest spool that fits your feeder minimizes change-over time.

Q: How should I store the Lincoln Metalshield MC-706 Metal-Cored GMAW-C Welding Wire to prevent weld quality issues?

Store MIG wire in a clean, dry location away from humidity. Moisture absorption causes porosity in the weld — mild steel wire is particularly susceptible. If wire has been exposed to moisture, it may show surface rust; lightly rusted wire can sometimes be used but should be wiped before feeding. Flux-core and low-hydrogen electrodes require stricter moisture control than solid wire. Keep spools in their original packaging or sealed containers with desiccant packets when not in use.

SKU: ED036358

$169.88 ~~$208.23~~

Package Size

Lincoln Elite Dealer

Free Shipping over $250

Lowest Price

Visit our support center

Expert help & advice
Check your order status

Updates & Tracking
Returns & exchanges

All you need to know
Why WeldingMart.com

Our Promise To You