What shielding gas or flux type does the Lincoln E80C-Ni1-H4 (Metalshield MC-80 XLS GMAW-C Welding Wire) require?

Shielding gas selection affects arc stability, spatter, bead profile, and penetration: 100% CO2 gives deep penetration and good bead wetting but more spatter; 75% Ar/25% CO2 (C25) is the most popular general-purpose mix, balancing penetration, spatter, and bead appearance; higher argon mixes (90/10, 95/5) suit spray transfer at higher amperages. Match shielding gas to your wire alloy and welding parameters.

What is the deposit strength of the Lincoln E80C-Ni1-H4 (Metalshield MC-80 XLS GMAW-C Welding Wire)?

For E80C-Ni1-H4: Deposit tensile strength for mild steel solid MIG wire (ER70S-x) is approximately 70,000 PSI (483 MPa) minimum. For stainless filler metals, the deposit strength matches the base alloy grade. For flux-core wires, strength and chemistry vary by classification — refer to the AWS classification on the package for the exact mechanical property requirements.

Call to Talk With A Product Expert - 877-532-WELD (9353)

1 6

Lincoln E80C-Ni1-H4 (Metalshield MC-80 XLS GMAW-C Welding Wire)

Q: What wire diameter is the Lincoln E80C-Ni1-H4 (Metalshield MC-80 XLS GMAW-C Welding Wire) available in?

The Lincoln E80C-Ni1-H4 (Metalshield MC-80 XLS GMAW-C Welding Wire) is available in .052, 1/16 diameter. Wire diameter selection depends on base metal thickness and travel speed requirements: .023 in suits thin sheet metal (up to 3/16 in), .030 in is versatile for 1/8–1/4 in, .035 in is the most common all-purpose diameter for 3/16–1/2 in steel, and .045 in or larger suits heavy plate and high-deposition applications.

Q: What spool size is the Lincoln E80C-Ni1-H4 (Metalshield MC-80 XLS GMAW-C Welding Wire) available in?

MIG wire spool sizes range from 2 lb (small hobbyist spools) to 600 lb bulk drums. Most production feeders accept 12 in (33–44 lb) spools. Check your wire feeder's spool capacity before ordering — some compact machines only accept 4 in (10 lb) spools. Using the largest spool that fits your feeder minimizes change-over time.

Q: How should I store the Lincoln E80C-Ni1-H4 (Metalshield MC-80 XLS GMAW-C Welding Wire) to prevent weld quality issues?

Store MIG wire in a clean, dry location away from humidity. Moisture absorption causes porosity in the weld — mild steel wire is particularly susceptible. If wire has been exposed to moisture, it may show surface rust; lightly rusted wire can sometimes be used but should be wiped before feeding. Flux-core and low-hydrogen electrodes require stricter moisture control than solid wire. Keep spools in their original packaging or sealed containers with desiccant packets when not in use.

SKU: ED037109

$222.55 ~~$272.91~~

Select Diameter & Package Size

Lincoln Elite Dealer

Free Shipping over $250

Lowest Price

AWS / Classification: E80C-Ni1-H4, E80T15-M21A5-Ni1-H4

Visit our support center

Expert help & advice
Check your order status

Updates & Tracking
Returns & exchanges

All you need to know
Why WeldingMart.com

Our Promise To You