Lincoln Electric OEM control board for the Lincoln Ranger, Eagle, Weld Mark and Red-D-Arc engine-driven welder code numbers documented below.
This is the Lincoln Electric OEM weld control PC board carried in Lincoln's own replacement-parts catalog as part number 9SG10047-1, catalog name WELD CONTROL P.C. BOARD. Lincoln's Ranger 250 GXT machine schematic L15726 Rev. C calls out reference designator PCB1 as the field & idle control PC board and states "L12198-1 or G10047-1 — G10047-1 replaced L12198-1 approximately November 2020." In Lincoln's parts catalog this part number carries the superseded part number 9SL12198-1.
Because this control board is code-number specific, the section below lists every Lincoln Ranger, Eagle, Weld Mark and Red-D-Arc code number whose Lincoln parts book calls out this control board.
- Orderable Lincoln part number: 9SG10047-1. Lincoln's replacement-parts catalog lists this part number with the catalog name WELD CONTROL P.C. BOARD; Lincoln's machine schematics use the designation G10047-1.
- Schematic designation: PCB1 — field & idle control PC board (Ranger 250 GXT schematic L15726 Rev. C)
- Supersedes: 9SL12198-1 (G10047-1 replaced L12198-1 approximately November 2020)
- Board type: weld control board / field & idle control PCB
- Supplier: Lincoln Electric (OEM)
- Parts-book listing: Lincoln's parts book 11493 (Ranger 250 GXT) lists this board as item 7A of the Blower Baffle Assembly page, quantity 1 each
Every Lincoln Ranger and Eagle welder is built in many production runs, and the correct control board is determined by the welder's code number, not by the model name alone. Before you order:
- Find the code number on your machine's rating/nameplate (printed as "Code" followed by a number).
- Match that code number against the list below.
- Confirm the board in your machine's own parts list using Lincoln Electric's replacement-parts lookup by code number.
- If your code number is not listed, or you are unsure, contact us before ordering so we can check the parts list for your exact code.
The code numbers below are the machines whose Lincoln Electric parts books list 9SG10047-1 — 53 code numbers in total, taken from Lincoln's own "where used" record for this part. Model names are shown as Lincoln lists them.
| Lincoln model (as listed by Lincoln) | Code number(s) |
|---|---|
| Ranger 250 GXT | 11269, 11420, 11493, 11667, 11689, 11736, 11793, 11799, 11800, 12095, 12096, 12201, 12202 |
| Ranger 250 GXT SS / Stainless | 11668, 11737 |
| Ranger 250 GXT (AU) | 11741, 11792, 11796, 11803, 12099 |
| Ranger 250 GXT White Tail Camo / Fall Camo | 12539, 12652 |
| Ranger 250 GXT Sunbelt | 12668 |
| Ranger 225 | 11597, 11734, 11790, 11797, 12093, 12199 |
| Ranger 225 GXT | 11522 |
| Ranger GXT / Ranger GXT Kohler | 11154, 11400 |
| Ranger 3-Phase Kohler / Ranger 3-Phase | 11079, 11419 |
| Ranger 10,000 Kohler / Kohler Plus | 11041, 11151, 11394 |
| Ranger 10,000 Honda | 11095, 11398 |
| Ranger 10,000 Robin-Subaru / Robin Plus | 11253, 11395 |
| Eagle 10,000 / Eagle 10,000 Kohler | 11397, 11096 |
| Eagle 10,000 Plus (incl. Kohler, VG750) | 11618, 11735, 11791, 11798, 12094, 12200, 13414 |
| Weld Mark 225 / Weldmark 225 | 11081, 11396 |
| Red-D-Arc ZR-8 Kohler | 11399 |
If your machine's code number does not appear above, this board is not documented for it. Model name alone — including "Ranger 250" — does not establish fitment; always match the code number.
Lincoln documents this control board as the field & idle control PCB (PCB1) in the machines listed above. Symptoms such as unstable weld output, an engine that will not change idle speed, or loss of control response can have several causes; they do not by themselves confirm a failed PC board. Have a qualified service technician troubleshoot the machine against Lincoln's service documentation and the wiring diagram for your specific code number before you replace a board.
A control board is a static-sensitive PCB. Installation should be performed by a qualified service technician following Lincoln's service documentation for your code number, with proper anti-static handling, and with the machine shut down and disconnected from all power sources.
Per WeldingMart's return policy, circuit boards (PCBs) are not returnable once the static/anti-static bag has been opened, most other items may be returned within 30 days of delivery, and all returns require an RMA before they are sent back. Please confirm your code number before opening the bag — see our return policy for full details.
Does this board replace L12198-1?
Yes, as documented by Lincoln. Lincoln's parts catalog records 9SL12198-1 as the superseded part number for 9SG10047-1, and the Ranger 250 GXT schematic L15726 Rev. C states that G10047-1 replaced L12198-1 approximately November 2020.
Will this control board fit my Lincoln Ranger 250?
If you are looking for a Lincoln Ranger 250 control board — also called a Lincoln Ranger 250 PC board — 9SG10047-1 is the board Lincoln's parts books document for the Ranger 250 GXT code numbers listed above. It is the correct board for your machine only if your welder's code number is in that list. Lincoln built Ranger 250 GXT machines under many code numbers, and parts content differs between them. Check the code number on your nameplate, and confirm it against the parts list for that code.
What if my code number isn't listed?
Contact us with your welder's code number and we will check the Lincoln parts list for that code before you order. We will not guess a control board fit that Lincoln's parts documentation does not show.
Call our parts team at 877-532-9353 with your machine's model and code number, or browse more welder PC boards and control boards and Lincoln Electric OEM service parts. Our Lincoln Electric service parts guide explains how to read a code number and order the correct part.