The Ranger 260MPX engine driven welder/generator excels on the job. The unit's industry-leading design makes it smaller, lighter and quieter than other machines in its class, while an intuitive user interface with advanced technology helps simplify operation and improve arc control. You can also count on a reliable source of clean generator power to run a variety of tools and sensitive equipment. Check out the features below:
The Ranger 260MPX sets a new standard for engine-driven welder/generators with its industry-leading design that offers significant advantages over competitive machines in its class. This innovative unit is up to 20% smaller, providing more space for additional tools and equipment on crowded job sites or service trucks. At up to 25% lighter than comparable machines, it offers enhanced maneuverability around job sites, reducing operator fatigue during transportation and setup. Perhaps most impressively, the Ranger 260MPX operates at up to 60% quieter than similar units, dramatically reducing noise levels to help enhance safety, improve communication, and create a more comfortable working environment for operators and nearby personnel.
The Ranger 260MPX combines an innovative user interface with advanced technology to deliver superior welding performance and operational simplicity. The easy-to-read digital screen with intuitive push-and-turn controls makes parameter adjustment quick and straightforward. Ready.Set.Weld technology simplifies setup by providing recommended settings for various applications, helping operators of all skill levels achieve optimal results. Chopper Technology enhances arc control for improved weld quality, while CrossLinc remote technology enables convenient arc adjustments directly at the weld location, eliminating trips back to the power source. The unit also features maintenance alerts that keep operators informed when service is needed, helping to maximize uptime and extend equipment life. With 9.5kW of clean AC generator power that delivers just 5% Total Harmonic Distortion, the Ranger 260MPX can safely power sensitive electronics like laptops and diagnostic equipment without concern. Operators can simultaneously run generator power and weld without interruption, making this versatile machine an ideal solution for construction sites, maintenance operations, and field repairs where both welding capability and reliable power generation are essential requirements.
- Compact Size - Up to 20% smaller than other machines in its class
- Low Decibel Rating - Up to 60% quieter for enhanced safety and comfort
- Easy-to-Use Digital User Interface with Ready.Set.Weld technology
- Clean AC Generator Power with 5% Total Harmonic Distortion
| Dimensions (H x W x D) | 26 in x 20 in x 36 in (660 mm x 508 mm x 914 mm) |
| Net Weight | 446 lbs (202 kg) |
| Machines Processes | Stick (SMAW) TIG (GTAW) MIG (GMAW) Flux-Cored Self-Shielded (FCAW-S) Flux-Cored Gas-Shielded (FCAW-G) |
| IEC Rating | 231A / 29.2V / 100% @ 104°F (40°C) |
| Output Range by Mode | CC-Stick: 35–260 Amps, Touch Start TIG: 20 – 250 Amps, CV-Wire: 14 – 28 Volts |
| Single Phase Auxiliary Output | 9,500 Watts Continuous, 120/240V |
| Auxiliary Output Frequency | 60 Hz |
| Receptacle Types | NEMA 5-20R NEMA 6-50R NEMA 14-50R |
| Engine Brand & Model | Kohler OHV Command CH730 |
| Engine Description | 2 Cylinder Air-Cooled Gasoline Engine |
| Engine Horsepower | 23.5 HP |
| High Idle Operating Speed @ Rated Output | 3600 |
| Fuel Tank Size (US gal.) | 11 |
| Fuel Tank Size (L) | 41.6 |
| Oil Capacity (qts.) | 2.0 |
| Oil Capacity (L) | 1.9 |
| Typical Application | Construction Construction & Field Erection General Fabrication Maintenance & Repair Repair Welding Structural Fabrication Structural Welding |
| Warranty | 3 Years Parts and Labor - Engine warranted separately by engine manufacturer |
Lincoln lists the welding processes for the Ranger 260MPX as: Stick, MIG, TIG, Flux-Cored (plus gouging). Source: Lincoln spec sheet E6.105.
Yes. Lincoln publishes the auxiliary AC generator output for the Ranger 260MPX as: single-phase 1-Ph/AC Power: 9.5 kW Continuous, 10 kW Peak (60 Hz Single Phase). Lincoln publishes these receptacles for this machine:
- Full KVA Receptacle (panel label: 120/240 Volt AC Full KVA Receptacle) — 120/240V, 39.5 @ 240V; 40A @ 120V ea. Branch Circuit, NEMA type not stated by Lincoln
- 240 Volt AC Receptacles (panel label only; no rating given) — 240V, amperage not stated by Lincoln, NEMA type not stated by Lincoln
- Four 120V Receptacles — 120V, 20A Total, NEMA type not stated by Lincoln
Source: Lincoln spec sheet E6.105.
The Ranger 260MPX on this listing is powered by a Kohler CH730 gasoline engine, minimum 23.5 HP. Kohler engines in this line are gasoline or LP-Gas — there is no Kohler diesel in the Lincoln engine-drive range. Lincoln’s current engine-warranty document brands Kohler as Rehlko (formerly Kohler). Source: Lincoln spec sheet E6.105.
Duty cycle varies by output setting and by which rating standard is used. Lincoln publishes the Ranger 260MPX at 100% duty cycle at every rated point, both on the NON-IEC maximum output (260 A / 26 V) and on all three IEC ratings (DC Stick 231 A, DC TIG 260 A, DC CV 253 A).
| Welding process / output mode | Rating basis | Amperes | Volts | Duty cycle | As printed by Lincoln |
|---|---|---|---|---|---|
| Maximum Output | NON-IEC Rating | 260A | 26V | 100% | NON-IEC Rating: Maximum Output: 260A/26V/100% |
| DC Stick | IEC Rating | 231A | 29.2V | 100% | IEC Rating: DC Stick: 231A/29.2V/100% |
| DC TIG | IEC Rating | 260A | 20.4V | 100% | IEC Rating: DC TIG: 260A/20.4V/100% |
| DC Constant Voltage | IEC Rating | 253A | 26.7V | 100% | IEC Rating: DC Constant Voltage: 253A/26.7V/100% |
| DC Constant Current | NOT LABELLED (Machine Specifications, CC Rated Output column) | 260A | 26V | 100% | 260A/26V/100% |
| Touch Start TIG | NOT LABELLED (Machine Specifications, CC Rated Output column) | 260A | 26V | 100% | 260A/26V/100% |
| DC Constant Voltage | NOT LABELLED (Machine Specifications, CV-Rated Output column) | 260A | 26V | 100% | 260A/26V/100% |
| Mode / parameter | Range |
|---|---|
| Output range | NOT STATED |
| Open circuit voltage | NOT STATED |
| Rated ambient temperature | NOT STATED |
| Specification | As printed by Lincoln |
|---|---|
| Peak / surge output | 10,000 Watts Peak AC Power (Machine Specs); 10 kW Peak (Product Specs) |
| Continuous output | 9,500 Watts Continuous AC Power (Machine Specs); 9.5 kW Continuous (Product Specs) |
| Single-phase | 1-Ph/AC Power: 9.5 kW Continuous, 10 kW Peak |
| Three-phase | NONE PRESENT (single-phase machine) |
| Frequency / phase | 60 Hz Single Phase |
| Receptacle | Voltage | Amperage | NEMA type |
|---|---|---|---|
| Full KVA Receptacle (panel label: 120/240 Volt AC Full KVA Receptacle) | 120/240V | 39.5 @ 240V; 40A @ 120V ea. Branch Circuit | NOT STATED |
| 240 Volt AC Receptacles (panel label only; no rating given) | 240V | NOT STATED | NOT STATED |
| Four 120V Receptacles | 120V | 20A Total | NOT STATED |
Source: Lincoln Electric publication E6.105 (Issue Date 06/23) — view the Lincoln spec sheet PDF. Figures are Lincoln's own; “NOT STATED” means Lincoln does not publish that value for this machine.
Yes — this is a factory demo or low-hour unit directly from Lincoln Electric. Units may show light cosmetic marks from display use but are mechanically sound. The warranty on this unit is the same as on a new machine. Lincoln’s Industrial Limited Warranty (form IMWS1, Apr-2026) lists a 3-year warranty period for “All Lincoln welding machines, wirefeeders & plasma cutting machines”, and Lincoln states: “Lincoln will assume both the parts and labor expense of correcting defects during the warranty period.” As on a new machine, the engine is not covered by Lincoln’s warranty — Lincoln states: “All engines and engine accessories are warranted by the engine or engine accessory manufacturer and are not covered by this warranty.” This machine’s Kohler CH730 engine is warranted by Rehlko (formerly Kohler): “Three Years”, and that term “BEGINS ON DATE OF PURCHASE BY END USER.” Lincoln footnotes the Rehlko (formerly Kohler) three-year term “First owner only.” Lincoln directs buyers to the engine maker — WWW.ENGINES.REHLKO.COM / 1-800-544-2444 Rehlko Service Department. See Lincoln Engine Drive Motors Warranty Contacts. Source: Lincoln Electric Industrial Limited Warranty (form IMWS1, Apr-2026).
Lincoln’s own included-items list for K3458-1 is: (1) Ranger 260MPX Engine Driven Welder (Lincoln K3458-1). This factory demo unit is supplied the same way. Not included: welding leads (electrode and work cable), electrode holder, work clamp, and accessory kits. No printed operator’s manual, WeldingMart demo-prep certification document or Lincoln warranty registration paperwork ships with the machine. Consumables (electrodes, gas cylinders) are not included. Leads, holders, clamps, cable connectors, undercarriages, spark arrestors, remote controls and wire feeders are sold separately — contact WeldingMart and we will quote the exact set you need.