What power source and gun is the Lincoln LN-25X with TVT & Magnum PRO Curve 300 One-Pak K4266-1 compatible with?

Wire feeders are compatible with MIG guns and welding power sources that match the feeder's amperage rating and connector type. Lincoln Electric wire feeders are engineered to work with Lincoln power sources using Lincoln Magnum guns and consumables. Third-party compatibility may require adapter cables — contact us to confirm compatibility before ordering.

How do I select the right drive rolls for the Lincoln LN-25X with TVT & Magnum PRO Curve 300 One-Pak K4266-1?

Drive roll selection depends on wire type and diameter: use knurled (serrated) drive rolls for flux-core and metal-core wire, and V-groove (smooth) drive rolls for solid MIG wire. Common wire diameters — .023 in, .030 in, .035 in, .045 in — each require matched drive rolls. Using the wrong drive roll type can crush flux-core wire or slip on solid wire.

How do I set wire feed speed on the Lincoln LN-25X with TVT & Magnum PRO Curve 300 One-Pak K4266-1?

Wire feed speed (WFS) is one of the primary variables controlling heat input and bead profile in MIG welding. Higher WFS increases deposition rate and amperage (in constant-voltage mode). For .035 in ER70S-6 on 1/8 in mild steel, a starting WFS of 200–350 in/min at 18–21V is a common baseline. Fine-tune to achieve a steady arc sound without spatter or porosity.

What routine maintenance does the Lincoln LN-25X with TVT & Magnum PRO Curve 300 One-Pak K4266-1 require?

Regular wire feeder maintenance includes: clean the wire conduit/liner every 3–6 months (or when wire feed becomes erratic), replace the liner when it shows kinks or buildup that cleaning cannot clear, inspect and clean the drive rolls monthly, and check all connection points for corrosion or looseness. A consistent, clean wire path is the most important factor in stable arc performance.

What warranty does the Lincoln LN-25X with TVT & Magnum PRO Curve 300 One-Pak K4266-1 carry?

The Lincoln LN-25X with TVT & Magnum PRO Curve 300 One-Pak K4266-1 carries a 3 Years warranty. Keep your purchase receipt and register the product with Lincoln Electric for warranty service. Warranty covers manufacturing defects; consumable items such as liners, drive rolls, and contact tips are excluded.

Lincoln LN-25X with TVT & Magnum PRO Curve 300 One-Pak K4266-1

SKU: K4266-1

$4,853.42 ~~$5,515.12~~

Lincoln Elite Dealer

Free Shipping

Lowest Price

One-Pak comes with the LN-25X with CrossLinc Technology and TVT, Magnum Pro Curve welding gun rated for 300A 60% duty cycle with 0.045 in gun liner and 15 ft cable, and 0.040-0.045 in cored wire drive roll kit.

Overview

Lincoln LN-25X with TVT & Magnum PRO Curve 300 One-Pak K4266-1

FULL CONTROL OF YOUR SYSTEM WITH NO CONTROL CABLES

Safety

Reduce job site clutter by removing cumbersome control cables
Eliminate unnecessary movement of personnel across the worksite
Eliminate the need to drag control cables around the site

Quality

Full voltage control at the feeder results in the correct settings for every weld
Accurately compensate for voltage drop across long cable runs
Eliminate unintentional machine adjustments

Productivity

Set up faster with fewer cable connections
Eliminate helpers or trips to the power source when making setting adjustments
Minimize rework with easy settings adjustment

Reliability

Fully encapsulated and environmentally protected electronics
Replaceable flame resistant case can be installed in under five minutes

CROSSLINC^™ TECHNOLOGY: SOLVING SITE WELDING ISSUES

Worker safety, weld quality, productivity and equipment reliability come to mind when welding on site or on large structures. In these environments, it is typical for the operator to work closely with a rugged, compact and lightweight wire feeder, connected to a weather-resistant power source hundreds of feet away. Until now, portable wire feeders have been available in two configurations: basic ‘across-the-arc’ models or portable feeders equipped with an added control cable.
‘Across-the-arc’ models are powered by the weld cable. This configuration provides benefits of fewer cables running back to the power source, but voltage control at the point-of-use is not possible.
The addition of a control cable to the system allows the operator to adjust voltage at the point-of-use, but these cables can be costly and add additional complexity to the production environment.
There has to be a better way.

Features

Portable and light weight field construction wire feeder
CrossLinc technology provides voltage control on the feeder when paired with a CrossLinc compatible power source. No control cables are needed.
TVT compensates for voltage drop across long weld cable lengths, allowing you to weld with the voltage you set at the feeder
Included Tweco® or Twistmate®(Dinse®) input power connection. Flowmeter and non-flowmeter models available.
Comes with Mangum Pro Curve 300 and .045 knurled wire drive rolls for cored wire

Specifications

Feature	Value
Typical Applications	Construction & Field Erection General Fabrication Heavy Equipment Heavy Fabrication Structural Fabrication
Processes	Flux-Cored (FCAW) MIG (GMAW)
Equipment Classification	Heavy Industrial
Product Height (in)	15
Product Height (mm)	381
Product Width (in)	8.7
Product Width (mm)	221
Product Length (in)	23.2
Product Length (mm)	589
Product Weight (lb)	37
Product Weight (kg)	16
Max Rating	450 A
Input Voltage	15-110 VDC

Downloads

Includes

(1) K4267-2 LN-25X with CrossLinc and TVT
(1) K2951-2-10-45 Magnum PRO Curve 300 Ready-Pak
(1) KP1697-045C Drive Roll Kit 0.040-0.045 in Cored Wire

Reviews

Q&A

Product Overview