Call to Talk With A Product Expert - 877-532-WELD (9353)

Welding Wire for MIG, TIG, Stick & Submerged Arc Welding

Shop Welding Wire by Process

Choosing the correct welding wire begins with selecting the welding process. Different filler metals are engineered for MIG welding, TIG welding, stick welding, and submerged arc welding, each requiring specific wire compositions and classifications to ensure proper weld strength, arc stability, and compatibility with the base metal.

MIG Welding Wire

MIG welding wire is widely used in fabrication, manufacturing, and general welding applications where productivity and consistent arc performance are critical. Solid MIG wire and flux-cored wire provide efficient welding for carbon steel, stainless steel, and aluminum materials used in structural fabrication and industrial welding operations.

Shop MIG Welding Wire →

TIG Welding Rod

TIG welding rods are used in precision welding applications where control, weld appearance, and high-quality welds are important. TIG filler metals are commonly used for welding stainless steel, aluminum, and specialty alloys used in fabrication and industrial manufacturing.

Browse TIG Welding Rod →

Stick Welding Rod

Stick welding electrodes combine filler metal and flux coating in a single rod, making them a reliable welding solution for outdoor welding, structural fabrication, repair work, and maintenance applications where shielding gas may not be practical.

Shop Stick Welding Rod →

Submerged Arc Wire

Submerged arc welding wire is designed for high-deposition industrial welding applications used in pressure vessels, pipe fabrication, and structural steel manufacturing. This welding process delivers deep penetration and high productivity for heavy industrial fabrication.

Explore Submerged Arc Wire →

Welding Wire & Filler Metals for Professional Welding

WeldingMart supplies professional welding wire and filler metals trusted by fabrication shops, contractors, industrial manufacturers, and repair facilities. Our inventory includes MIG welding wire, TIG rods, stick electrodes, submerged arc wire, brazing alloys, welding flux, and solder designed for dependable arc performance and consistent weld quality.

We carry welding consumables from leading manufacturers including Lincoln Electric and Harris Products Group, providing high-quality filler metals for welding carbon steel, stainless steel, aluminum, and specialty alloys.

Whether you’re performing structural fabrication, industrial manufacturing, equipment repair, or maintenance welding, selecting the correct welding wire ensures strong weld integrity and reliable performance across a wide range of welding environments.

How to Choose the Right Welding Wire

Selecting the proper welding wire depends on several factors related to the welding process and the materials being welded. Different filler metals are designed to match the base metal composition and welding conditions required for the application.

Important factors to consider include:

  • Welding process (MIG, TIG, stick, or submerged arc)
  • Base metal type and thickness
  • Required weld strength and penetration
  • Shielding gas compatibility
  • Welding position and working environment

Choosing the correct filler metal improves weld quality, arc stability, and overall welding productivity.

Why Buy Welding Wire from WeldingMart?

WeldingMart provides professional welding wire and filler metals designed to meet the demands of industrial welding and fabrication. Our product selection includes reliable consumables from trusted industry brands used by professional welders across construction, manufacturing, and repair applications.

Benefits of shopping with WeldingMart include:

  • Professional-grade welding consumables
  • Trusted brands including Lincoln Electric and Harris Products Group
  • Competitive pricing and reliable product availability
  • Expert support for selecting the right welding filler metals for your application

Frequently Asked Questions

What is the difference between Lincoln SuperArc L-56 and L-50 MIG wire?
Both are ER70S-class mild steel MIG wires, but they differ in deoxidizer content. Lincoln SuperArc L-56 contains higher levels of manganese and silicon deoxidizers, making it the better choice for welding on steel with mill scale, rust, or light surface contamination — common in structural and general fabrication work. SuperArc L-50 (ER70S-3) has lower deoxidizer levels and is suited for clean, prepared base metal where premium arc characteristics and lower silicon islands on the weld face are desired, such as on material that will be painted or powder-coated.
What shielding gas should I use with ER70S-6 MIG wire?
The most common shielding gas for ER70S-6 wire like the Lincoln SuperArc L-56 is a 75% Argon / 25% CO2 blend (C25), which provides a good balance of arc stability, low spatter, and good bead profile across short-circuit, globular, and spray transfer modes. 100% CO2 is a lower-cost alternative that increases penetration and deposition but generates more spatter and a rougher bead profile. Pure Argon is not recommended for MIG welding carbon steel, as it causes an unstable arc and poor fusion.
What is Lincoln Innershield NR-211-MP and when should I use it instead of solid MIG wire?
Lincoln Innershield NR-211-MP (E71T-11) is a self-shielded flux-cored wire that requires no external shielding gas, making it ideal for outdoor, windy, or field welding where gas coverage would be disrupted. It runs on DC electrode negative (DCEN) polarity and is rated for all-position welding on mild steel up to 1/2 in. thick in larger diameters. The trade-off compared to solid MIG wire is that FCAW-S produces more fumes, requires slag removal after each pass, and typically leaves a rougher weld appearance.
What is the difference between E71T-11 and E71T-GS flux-core wire?
Both are self-shielded (gasless) flux-cored wires running on DCEN polarity, but E71T-GS is approved for single-pass welding only, making it best suited for thin-gauge sheet metal applications. E71T-11 — like Lincoln Innershield NR-211-MP — is classified for multi-pass welding and a wider range of material thicknesses up to 1/2 in. For structural or multi-pass work, always use E71T-11; using E71T-GS for multi-pass welds can result in inadequate mechanical properties in the deposited weld metal.
What is the Lincoln Outershield 71 Elite and how does it differ from self-shielded wire?
Lincoln Outershield 71 Elite is a gas-shielded flux-cored wire (FCAW-G) classified E71T-1C/1M-H8, meaning it requires external shielding gas — typically 75/25 Ar/CO2 or 100% CO2. Unlike self-shielded wire, FCAW-G produces higher deposition rates, better impact toughness, lower hydrogen content, and a smoother bead profile, making it the preferred choice for structural steel fabrication, shipbuilding, and pressure vessel work where quality and productivity must both be high. The 0.045 in. diameter on a 33 lb spool is the most common production size.
What is Lincoln SuperArc LA-75 wire and what steel is it for?
SuperArc LA-75 is a low-alloy MIG wire classified ER80S-Ni1 containing approximately 1% nickel. It is designed for welding weathering (Cor-Ten) structural steels on bridges and buildings, as well as for applications requiring excellent low-temperature Charpy impact toughness such as cryogenic vessels and cold-climate construction equipment. Its 80,000 psi minimum tensile strength deposit makes it appropriate for higher-strength steels where standard ER70S-6 would be undermatched.
What MIG wire diameter should I use for welding thin-gauge sheet metal versus heavy plate?
For sheet metal and thin gauge steel (18 ga. to 3/16 in.), a 0.023 in. or 0.025 in. wire diameter with short-circuit transfer provides the lowest heat input and best control over burn-through. For general fabrication up to 1/2 in. plate, 0.030 in. or 0.035 in. is the most versatile choice. For heavy structural work and high-deposition production welding on plate 3/8 in. and thicker, 0.045 in. or larger wire with spray transfer or FCAW-G offers the highest deposition rates and best productivity.
Can I use Lincoln SuperArc L-56 wire for stainless steel welding?
No — SuperArc L-56 is formulated for mild and low-alloy carbon steel only, and using it on stainless steel would result in weld deposits with insufficient corrosion resistance and incorrect mechanical properties. For stainless steel MIG welding, Lincoln Electric offers the Blue Max 308LSi wire (ER308L-Si classification) for welding 304/304L stainless, which requires 100% Argon or an Ar/CO2/O2 tri-mix shielding gas. Always match the filler metal classification to the base metal alloy.
What is Lincoln SuperGlaze 4043 aluminum wire used for?
SuperGlaze 4043 is a 4% silicon aluminum MIG wire (AWS classification ER4043) used for MIG welding most common aluminum alloys, including 6061, 6063, 3003, and cast aluminum. It produces a fluid puddle, low cracking sensitivity, and good crack resistance in the weld, with a bright, cosmetically appealing bead. For 5000-series alloys (5052, 5083, 5086) under high stress or in marine environments, ER5356 (higher magnesium) is typically the preferred filler for better strength and corrosion resistance.
What spool size should I buy — 10 lb versus 33 lb?
For occasional shop use, repair welding, or smaller MIG machines with 8 in. or smaller spool capacity, a 10 lb spool is the practical choice and reduces wire waste if you switch wire types frequently. For production welding, fabrication shops, or machines with a 12 in. spool hub, 33 lb spools significantly reduce spool changeover time and typically offer a lower cost per pound. Lincoln Electric also offers larger 44 lb fiber spools and 500 lb drums for high-volume GMAW and FCAW-G operations where maximum uptime is critical.

Welding Wire for MIG, TIG, Stick & Submerged Arc Welding Questions & Answers