Lincoln Electric DUAL PROCESS SWITCH - K1528-1

Mounts on front of machine and provides polarity change or electrical isolation. Great for arc gouging applications and where two separate feeders require different output polarity or inductance settings. Not compatible with K1486-1 air filter.

Lincoln Electric DUAL PROCEDURE/MEMORY PANEL - K2360-1

Dual Procedure/Memory PanelWeld procedures are saved into memory for future use.

Lincoln Electric DUAL PROCEDURE SWITCH (5 PIN) - K683-3

Allows the use of two welding procedures with one Lincoln Magnum gun connected to a LN-10 or DH-10. 15 ft. (7.6 m).

Lincoln Electric Arc Start Switch - K814

Top Features Needed if an Amptrol is not used when TIG welding. Comes with a 25 ft. (7.6m) cable.  Attaches to the TIG torch for convenient finger control. Equipped with a 6 pin connector.

Lincoln Electric PRECISION 275 TIG ADVANCED CONTROL PANEL - K2621-1

Provides 2/4-step trigger with adjustable Pulser controls and Downslope timer for TIG welding. Also includes adjustable Hot Start and Arc Force internal panel controls for stick welding, and other user selectable features.

Lincoln Electric ADVANCED PROCESS PANEL - K1763-1

Advanced Process Panel Field installed. Expands process capability of Factory Model to include Pulsed MIG. Designed for K1728-6 only.

Lincoln Electric 115V AUXILIARY POWER KIT - K2829-1

Add a duplex 115V receptacle to the back of the machine. Includes PC board and harness which must be installed.

Lincoln Electric CrossLinc Remote - K4345-1

Top Features Compatible with any CrossLinc -equipped welder inlcuding Flextecs and Ranger 330MPX welders to adjust welding output remotely at the arc, including current for stick or TIG welding or voltage for wire welding processes. Remotely control...

Lincoln Electric NEW 12-Pin 100ft. Universal Remote Output Controller - K857-3

Top Features Permits remote adjustment of output. 100 ft. (30.48 m) Uses 12-pin accessory connection. Requires K3001-2 Stick/TIG User Interface when used with Power Wave S350. The ability to control weld output at a distance keeps welders safe...

Lincoln Electric Remote Output Control - 125 ft. - K4330-1

YOU'RE IN CONTROL When your welding application takes you away from your welder, these heavy duty remote controls will give you the control you need to get the job done and stand up to the conditions of your environment. Generous 125 ft. (38.1 m) cable...

ESAB - REMOTE FOOT CONTROL - W4014450

The foot control is designed to work with the NEW ESAB REBEL. It is a medium duty remote that comes this 15 ft cable and an 8 pin amphenol plug.

Lincoln Electric Remote Output Control with 120V AC Rec. - 125 ft - K4268-1

Rely on a Lincoln Electric remote output control from WeldingMart to give you excellent control over your equipment. Welders are known to be creative and clever when conditions make welding challenging. The K4268-1 cable remote control switch will...

Lincoln Electric Wireless Pedal for TIG Welding - K4217-1

ENHANCED FREEDOM AND MOBILITY FOR TIG WELDING The Wireless Pedal makes it easier to access hard-to-reach areas. Improve operator mobility, reduce cable clutter, and create a more comfortable and productive TIG welding experience. Enhances workplace...

Lincoln Electric Remote Output Control with 12-pin Universal Connector (25 ft, 7.6m) - K857-2

Permits remote adjustment of output. Requires K3001-2 Stick/TIG User Interface. 25 ft. (7.6 m) when used with Power Wave S350. - Net Weight - 14.00 (6.3kg)

Lincoln Electric MULTI-PROCESS SWITCH - K804-1

Recommended when using the DC-600 for both semi-automatic welding and stick/air carbon arc welding.

Lincoln Electric GFCI KIT - K3157-1

Keep your Flextec 650 in prime working order with a replacement GFCI receptacle from WeldingMart. The Lincoln Flextec 650 welder gets a lot of use because of its durability and adaptability to a lot of different job sites. This GFCI kit contains...

Lincoln Electric MULTI-PROCESS SWITCH - K3091-1

Easily switch between CC and CV processes.

Lincoln Electric CRATER FILL CONTROLS P.C. BOARD FOR AUTOMATICS - K245

Adjusts the finishing current and voltage higher or lower than welding procedures for an adjustable period of time as needed to control bead size or fill craters at the end of the weld.

Lincoln Electric START CONTROLS P.C. BOARD FOR AUTOMATICS - K221

Adjusts starting current and voltage higher or lower than welding procedures for an adjustable period of time as needed to control penetration, bead size or other factors at the start.

Lincoln Electric POWER MIG 210MP AMPTROL ADAPTER - K4104-1

Lincoln Electric Power MIG 210MP Amptrol Adapter Add versatility to your rig with a Lincoln Electric Power MIG 210 MP Amptrol adapter from WeldingMart. The K4104-1 Lincoln adapter expands the capability of your Power MIG 210. It’s one of many Lincoln...

Lincoln Electric MAGNUM SG CONTROL MODULE - K488

Lincoln K488 Magnum SG Control Module — WeldingMart.com Take control of your wire speed with a Lincoln Electric Magnum SG Control Module from WeldingMart. The Lincoln K488 control module enables you to take control of wire speed and gas flow, letting...

Lincoln Electric Polarity/Muti-Process Switch - K2642-1

For easy polarity switching. Example: DC-stick root pass on pipe & DC stick for hot, full and cap passes. Also for an easy process change. Example: DC stick root pass on pipe & DC Innershield self-shielded flux-cored wire for hot, fill and cap passes...

Lincoln Electric GFCI RECEPTACLE KIT 20A - K1690-1

Includes one UL approved 120V ground fault circuit interrupter duplex type receptacle and installation instructions. Replaces the factory-installed 120V duplex receptacle. Each receptacle of the GFCI duplex is rated at 20 amps. Maximum total current from...

Lincoln Electric Remote Output Control 6 PIN - 25 ft. (7.6 m) - K857

Remote Output Control   Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 25 foot cable length.

Lincoln Electric REMOTE CONTROL KIT - 100 FT - K2861-1

Remote Control KitRemote Remote control rheostat permits machine output changes up to 100 ft. (30.5m) from the machine. Plugs into receptacle on control panel.

Lincoln Electric Remote Output Control 6 PIN - 100 ft. (30.5M) - K857-1

Remote Output Control Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 100 foot cable length.  

Lincoln Electric REMOTE CONTROL KIT - 100 FT - K2464-1

Remote Control Kit - 100 ft.For use with Classic & Pipeliner engine-driven welders having a Wire Feed Module installed.

Lincoln Electric REMOTE INTERFACE MODULE - K336

Permits remote operation of the NA-5 inch up, inch down, start and stop functions by either of the following supplied external signals and provides electrical isolation of the NA-5 control circuitry from these signals:Switches - Momentary closure of...

Lincoln Electric REMOTE CONTROL CABLE ADAPTER - K864

Y connection adapter for connecting K857, K963 or K870 (6-pin plug connection) and wire feeder input cable (14-pin plug connection) to 14 pin receptacle.

Lincoln Electric REMOTE VOLTAGE CONTROL KIT - K2329-1

Allows arc voltage to be changed at the feeder.

Lincoln Electric REMOTE OUTPUT CONTROL WITH 120V AC RECEPTACLES - 100 FT - K2627-2

Remote weld output control box with two 120V AC receptacles having GFCI (ground fault circuit interrupter) protection. One cord for both remote and power. 100 ft. (30.5 m) length. Permits remote adjustment of weld output and power for tools (such as a...

Lincoln Electric REMOTE CONTROL KIT - 100 FT - K924-4

Are you looking for a Lincoln SA250 remote control unit? For convenient remote output control for stick operation of various Lincoln welding machine models, we have the Lincoln K924-4 remote control kit. This kit contains a switch, receptacle, remote...